.jobDisplayShell { max-width: 1000px !important; }

Engineering group manager

Engineering Project Manager

None

EPM; Tool & Injection Engineer ; CAE Engineer ; CAD Engineer ; CAD methodology support ; IT support ; customer (style, architecture); suppliers (mould, black parts, chromed parts); geometry engineer ; prototype department

Competences requirements

Knowledge / Qualification

Previous Experience (If relevant)

Key technical competencies

Key behavioral competencies

(on top of PO Group competencies)

Other requirements

Bachelor Degree or equivalent skilled experiences

Good knowledge of plastic rules (Shrinkage analysis, Demoulding…),

CAD Engineer, Mould engineer, Plastic Parts design

Basic mechanicals rules, able to define isostatism system and to build stack up folder, able to build and check product under CAD software system ; able to lead cad 3D and 2D activities ; Good command of English.

Missions

§

§

Missions

KPI and/or main deliverables

Ensures product design and architecture to meet the customer quality requirements (including weight, recycling, specifications), PO manufacturing requirements (design for manufacturing) as well as all costs and timing expectations
Manages functionally the CAD resources to fulfill the design
Ensures PO Design Standard are implemented (PODS & Technical Solutions)

CTQ (Critical to Quality) convergence
Isostatism file + stack up analysis folder
Style surfaces analysis
Design review actions plan
Product/Part 3D + 2D data

Activities

Works according to HSE requirements
Gets from customer all technical elements necessary for the design (gap and flushness requirements, surrounding parts, interfaces…)
Looks for solutions and suggests technical proposals to EPM for project decision, respecting existing documents in PO network (design standards/PODS, lessons learnt, benchmark reports…)




Realizes and pilots the design of parts and products: analyses the feasibility (styling surface, parting lines, aspect, injection, demoulding, painting, assembly, packaging, perceived quality, recycling …) with regards to functional specifications from customer
Manages the daily technical flow of information with CAD office and the Tier 2 suppliers according to the PO standard
Checks and validates the quality of the CAD files received from customer, suppliers and design offices
Ensures the regular update of the 3D data, 2D drawing and parts’ attributes within the PO CAD file database (TDM).
Checks and suggests the reference systems of the parts, semi-finished products and products and updates it during the project
Builds the geometry file with stack-ups and tolerances, ensures the validation by the Geometry Engineer. Updates this folder during the project life
Liaises with the toolmaker together with the Injection & Tooling Engineer to optimize the design of parts (according to tool feasibility).
Before the tool kick-off, defines and formalizes with EPM and the Injection & Tool Engineer the tuning zone areas to be taken into account for the tools realization
Follows the realization of 2D/3D drawings of the internal parts and assembly regarding to the project requirements. Validates technically these drawings before submission to the project for validation before provided to customer

For POE parts designed by the Tier 2 suppliers:
Provides to the supplier all 3D data needed, gap & flushness requirements and functional specifications





Analyses the planning of the design of the supplier and checks that it is compatible with his

own activities

Participates to the validation of the datum scheme, the tolerance stack-ups and measuring points
Checks and validates the 3D design and give feed-back to the supplier and to the EPM o
Validates the 2D/3D drawings of the supplier

For POE parts designed by POAE: o Provides the 3D data, functional specifications and gap & flushness to the supplier to validate process feasibility

o Updates the 3D data if needed o Provides the 2D/3D drawings to the supplier

Proposes and leads the Design Reviews on his project
Executes the actions decided during the design reviews and updates regularly the action plan
Takes into account the perimeter changes after written validation from the EPM
Manages the CAD file exchanges with the customer respecting internal standards and customer specifications
Participates to the study and means validation of the checking fixture
Could use checking fixture for product fine tuning

During the tuning phase: o Validates the 2D/3D drawings of the supplier o Can participate to tool trials o Can manage the manufacturing of samples for the customer and the process validation o Can participate to the cubing events at the customer o Analyses and suggests modifications on the parts and products to meet the requirements (by taking also into account the feedback from other team members) o Updates or pilot the updates of the CAD data according to modifications validated by the project

Reports to the EPM the status of the Design Reviews and related actions, the CAD data timing plan and action plan
Capitalizes and formalizes the lessons learned of the design during all the project life

Date: Jul 20, 2026

Location:
Pune, IN

#job-location.job-location-inline { display: inline; }
Job Requisition ID: 384696

📌 DESIGN ENGINEER (India)
🏢 OPmobility
📍 India