- Understand quality requirements mentioned in drawings, specifications/ Material Standards, Customer/ Supplier PO and QAP/QCP & ensure compliance.
- Perform physical inspection as per drawings & ensure inspection reports are maintained by suppliers.
- Conduct inspection with approved latest revision of drawings. Verify calibration of instruments and ensure only calibrated instrument/machines/ovens are used.
- Review and ensure QC clearance of all previous stages while releasing for next stages as per approved QAP/QCP.
- Monitor quality activities & status of job as per approved QCP/inspection check list.
- Liaison with customer’s inspection agency wherever required to facilitate stage as well as final clearance in writing from customer.
- Report quality issues (if any) to L&T-QC; with proper details.




- Provide inspection visit log for approval to L&T-QC; on monthly basis.
- Monitor following at supplier end:

A. Approved quality control plan / inspection check list available for each PO with supplier.

B. Progressive compilation of document as per approved quality control plan.

C.QCP/ICL are updated at every inspection stage.

D. Supplier is proceeding for next stage of production only after DCR/NCR disposition from L&T.;

E. All stages of inspection are offered to L&T-QC; and TPI/customer as per scope defined in QAP/QCP.

Exp - 1 to 3 years

Pay: ₹20,000.00 - ₹30,000.00 per month

Perks:

- Food provided
- Provident Fund

Work Location: In person

📌 Quality Engineer (India)
🏢 Anu Industries
📍 India