What You’ll Do

- Specify and own the reset sequencing architecture. Own the secure boot and fuse micro architecture and design.

- Coordinate with the subsystem leads on reference clock distribution, clock-domain crossing points at subsystem interfaces.

- Collaborate with the firmware team to define the hardware/software interface: interrupt controller, timer, UART/JTAG debug port, and any DMA or mailbox channels

- Own the clock-gating implementation strategy: coarse-grain vs. fine-grain gating, ICG cell selection, and sign-off methodology for dynamic power reduction.

- Define the chip-level power-domain plan: which blocks share supplies, where level-shifters and isolation cells are required, and how power states map to the PCIe and UCIe link power management protocols.

- Own the on-chip power management logic: power-state machine, supply sequencing, voltage regulator integration, and the firmware interface for runtime power control.

- Drive power intent (UPF/CPF) authoring and sign-off, coordinating with physical design team on power-domain floorplan, always-on routing, and isolation verification.

- Own the embedded management processor subsystem: processor integration, on-chip SRAM and ROM sizing, boot sequence, fuse and OTP interface, and the firmware execution workplace.





- Define the management register map: the address space through which firmware configures operating modes, reads telemetry, controls power states, and manages DFT operations.

- Specify thermal monitoring integration: on-die temperature sensor placement, readout path to the management processor, and thermal throttling hooks.

What We’re Looking For

- BS/MS in Electrical Engineering, Computer Engineering, or equivalent. 8+ years of digital IC design, with at least 3 years owning chip infrastructure — clocking, power management, reset or DFT — at block-lead or subsystem-owner level.

- Familiarity with embedded microcontroller integration: memory maps, boot ROM, interrupt controllers, and firmware bring-up at the hardware level.

- Experience with reset-domain architecture and reset synchronizer design in multi-power-domain chips.

- Strong SystemVerilog skills for infrastructure RTL: clock-gating cells, power FSMs, scan-enable muxing, and BIST controllers.

Good to Have

- Background integrating a RISC-V or ARM Cortex-M class processor as a management/configuration engine in a non-CPU chiplet.

- Exposure to hardware security: secure boot, anti-tamper fuse programming, or related infrastructure.

📌 SoC RTL Design Engineer (Bengaluru)
🏢 tylsemi
📍 Bengaluru