Embedded Systems Engineer — Field Hardware - immediate? Bangalore (In office only)

This is a hands-on engineering role involving firmware, electronics, hardware integration, mechanical assembly and field testing. It is not a remote or software-only position.

For : https://tacetlabs.in/

This Role Is Strict No If•⁠ ⁠Your experience is limited to simulation or development boards

•⁠ ⁠Your hardware experience is primarily hobby Arduino projects

•⁠ ⁠You're looking for a software-only role

•⁠ ⁠You prefer working only on firmware while others handle hardware integration

•⁠ ⁠You haven't personally assembled, wired and commissioned complete hardware

•⁠ ⁠You are a fresher without independently built hardware projects

•⁠ ⁠You have atleast 2 year experience in embedded system (paid projects only, strict no to internship or academia or hobby etc…)

Application Requirements (Mandatory)Applications will not be reviewed unless they include all of the following:

1.⁠ ⁠A link to one hardware project you personally built end-to-end (GitHub, photos, write-up or video).

2.⁠ ⁠One sentence describing the hardest firmware, hardware or power-related issue you debugged on real hardware.

3.⁠ ⁠A brief breakdown of what you personally worked on in that project (firmware, Linux, electronics, PCB, wiring, mechanical assembly, enclosure, deployment).

- Its immediate and without any notice period etc…

Experience: 2–4 years (hands-on embedded/hardware engineering)

Compensation: 20,000/- per month for 1-3 months (contractual can extend as Full time role)

Location: Bangalore (On-site)





About the RoleWe're looking for an engineer who enjoys building complete embedded systems—not just writing firmware or software.

You'll take projects from components and schematics to fully assembled, tested and deployed hardware. This role requires ownership across embedded firmware, embedded Linux, electrical systems, mechanical integration and field validation.

If you enjoy building real products with your own hands, debugging across hardware and software, and taking ownership of an entire system, you'll fit well here.

Responsibilities•⁠ ⁠Develop embedded firmware in C/C++

•⁠ ⁠Develop Linux-based applications and services in Python

•⁠ ⁠Design and integrate battery-powered embedded systems

•⁠ ⁠Build and test complete hardware prototypes

•⁠ ⁠Integrate sensors, cameras, communication modules and actuators

•⁠ ⁠Design reliable power distribution and protection circuits

•⁠ ⁠Assemble, wire and commission hardware systems

•⁠ ⁠Perform mechanical integration, enclosure assembly and cable management

•⁠ ⁠Troubleshoot issues across firmware, Linux, electronics, power and mechanical systems

•⁠ ⁠Deploy and validate hardware in real-world environments

Required ExperienceEmbedded Firmware•⁠ ⁠2–4 years of hands-on embedded development

•⁠ ⁠Embedded C/C++

•⁠ ⁠ESP32, STM32 or similar MCUs

•⁠ ⁠GPIO, PWM, UART, I2C,



SPI

•⁠ ⁠Interrupt-driven firmware

•⁠ ⁠Watchdogs and fail-safe design

•⁠ ⁠Real hardware debugging

Embedded LinuxExperience with

•⁠ ⁠Raspberry Pi, Orange Pi, BeagleBone or similar

•⁠ ⁠Python

•⁠ ⁠systemd

•⁠ ⁠Serial communication

•⁠ ⁠USB peripherals

•⁠ ⁠Camera or sensor integration

•⁠ ⁠Flask or equivalent lightweight web frameworks •⁠ ⁠Linux networking

Electrical EngineeringHands-on experience with:

•⁠ ⁠Battery-powered systems

•⁠ ⁠Fuse selection

•⁠ ⁠safety/ protection

•⁠ ⁠Boost/ converters

•⁠ ⁠Voltage rail design

•⁠ ⁠Current budgeting

•⁠ ⁠Wiring and connector selection

Hardware & Mechanical AssemblyYou should be comfortable with:

•⁠ ⁠Soldering

•⁠ ⁠Crimping

•⁠ ⁠Cable management

•⁠ ⁠Multimeter-based debugging

•⁠ ⁠IP-rated enclosure assembly

•⁠ ⁠Cable glands

•⁠ ⁠Mechanical assembly using brackets, bearings and fasteners

•⁠ ⁠Basic fabrication and modification of enclosures

NetworkingWorking knowledge of

•⁠ ⁠MQTT

•⁠ ⁠TLS

•⁠ ⁠Cellular networking

•⁠ ⁠NAT and outbound device connectivity

Preferred•⁠ ⁠Servo or stepper motor control

•⁠ ⁠Mechanical CAD (Fusion 360, SolidWorks, Onshape or equivalent)

•⁠ ⁠Basic PCB design (KiCad or Altium)

•⁠ ⁠3D printing •⁠ ⁠Computer vision on embedded Linux

•⁠ ⁠Battery or solar-powered systems

•⁠ ⁠Outdoor IP65/IP67 hardware deployments

•⁠ ⁠Experience independently delivering complete hardware products

📌 Embedded Systems Engineer: immediate, contract (Bengaluru)
🏢 Tacet Labs
📍 Bengaluru