Mandatory Key Required

- As per the applicable statutory requirements By the GOI for safety roles in a production/manufacturing unit, candidates are required to hold a valid ADIS/PDIS Diploma. Apart from their eligibility education criteria. This is a mandatory qualification, and the diploma should be issued by a recognized institution such as:
- RLI (Regional Labour Institute)
- CLI/CIL (Central Labour Institute)
- State Technical Education Board or any other State Government-recognized Board/Institution

Qualification Non-Negotiable

- High School % : Should not be less than 60% overall. Even 59.1 % would not be rounded off to 60.
- Intermediate %: Should not be less than 60% overall. Even 59.1 % would not be rounded off to 60.
- Graduation %: Not less than 60% ( bachelor's degree in engineering- Mechanical, Chemical, Industrial, Production, Munition Technology or related discipline).Diploma/Degree in Industrial Safety.NEBOSH IGC or equivalent certification (preferred).Environmental management qualification (preferred).
- Age Should not be more than 28 Years (Adhar would be verified)

Job PurposeTo establish, implement, and continuously improve Workplace, Health, Safety and Explosive Safety Management Systems in an ammunition and explosives manufacturing facility, ensuring compliance with all applicable statutory requirements while preventing accidents, protecting personnel, safeguarding assets, and minimizing environmental impact.Experience3-5 years in EHS, preferably in ammunition, explosives, defence manufacturing, mining explosives, propellant production, or other hazardous chemical industries.Experience in explosive safety management, process safety, fire protection, and statutory compliance. Job PurposeTo supervise and monitor day-to-day safety activities in ammunition and explosives manufacturing, processing, filling, assembly, storage, testing and waste-disposal areas,



ensuring strict compliance with approved SOPs, risk controls, statutory requirements and site safety standards.The Safety Supervisor shall maintain a strong field presence and immediately identify and control unsafe conditions, unsafe acts, deviations from approved processes and potential fire, explosion and occupational safety hazards.Explosives & Process SafetyConduct routine safety inspections of explosive manufacturing and ammunition process areas.Ensure compliance with approved process parameters, SOPs, work instructions and safety precautions.Verify that only authorized personnel are permitted to enter restricted/explosive areas.Permit-to-Work & Work ControlVerify implementation of Permit-to-Work systems for applicable maintenance and non-routine activities.Ensure proper authorization before hot work, electrical work, confined-space work, excavation, work at height and other hazardous activities.Fire & Explosion PreventionEnsure unobstructed access to emergency exits, firefighting equipment, emergency routes.Participate in fire drills, emergency response exercises and evacuation drills.Report defects in fire protection systems immediately to the responsible authority.Safety Inspection & Hazard IdentificationConduct daily safety rounds in assigned areas.Identify unsafe acts, unsafe conditions and deviations from established controls.Carry out inspections using approved EHS checklists. Risk Assessment & Process Safety ManagementParticipate in Job Safety Analysis (JSA/JHA),



risk assessments and task-specific hazard assessments.Support HAZOP, What-if, FMEA, FTA and other process-safety studies as required.Verify implementation of risk-control measures identified through risk assessments.Explosives Storage & Material MovementMonitor safe movement and handling of explosives and ammunition within the facility.Ensure approved routes and procedures are followed during material movement.Personnel SafetyConduct toolbox talks and pre-job safety briefings.Ensure workers understand the hazards associated with their assigned jobs.Monitor PPE compliance.Contractor Safety ManagementMonitor contractor activities within production, maintenance, construction and utility areas.Verify contractor permits, competency, PPE and required training. Incident & Emergency ManagementImmediately respond to fire, explosion, spill, injury, near miss or other emergency situations in accordance with the site emergency plan.Raise emergency alarms and assist in evacuation when required.Occupational Health & Industrial HygieneMonitor exposure risks such as dust, fumes, vapors, noise, heat and hazardous chemicals.Ensure workers use prescribed respiratory, hearing, eye and other protection.Environmental SafetyMonitor safe handling and disposal of hazardous and explosive waste.Ensure waste is segregated, identified, and transferred through approved routes and procedures.DocumentationDaily safety inspections.Safety observations and unsafe-act/unsafe-condition reports.Permit-to-work verification.Toolbox talks and safety training.

[email protected] (Resumes to be shared)

Pay: ₹700,000.00 - ₹1,000,000.00 per year

Benefits:

- Cell phone reimbursement
- Commuter assistance
- Food provided
- Health insurance
- Internet reimbursement
- Leave encashment
- Paid sick time
- Provident Fund

Work Location: In person

📌 Safety Supervisor (India)
🏢 Woven
📍 India