Robotics & Embedded Systems Engineer ? Location: Bengaluru – On-site ? Job Type: Full-Time ? Experience: 0–3 Years ? Department: Robotics R&D; About the Role We are looking for a hands-on Robotics & Embedded Systems Engineer who enjoys building real-world robotic systems. This is not a regular software-development job. You will work with robot software, microcontrollers, sensors, cameras, communication protocols and embedded computers while directly participating in prototype development and testing.

What You Will Work On

Develop robotics software using Python and C/C Work with ROS / ROS2 Program STM32, ESP32, Arduino and similar microcontrollers Interface sensors, motors, actuators and controllers Work with communication protocols such as: CAN UART RS485 SPI I2C Ethernet Develop telemetry, data logging and monitoring systems Integrate cameras and video-streaming systems Work with Raspberry Pi / NVIDIA Jetson Develop communication between robot subsystems Debug hardware and software integration issues Perform bench testing and prototype validation Participate in robot assembly and field testing Skills Required You should have working knowledge of:



Python C / C Linux Microcontroller programming STM32 / ESP32 / Arduino or similar Serial communication Basic electronics Git / Version Control Hardware debugging Preferred Skills Experience with any of the following is an advantage: ROS / ROS2 Raspberry Pi NVIDIA Jetson CAN Bus OpenCV MQTT TCP/IP Networking IMU GPS / GNSS Encoders Cameras & Sensors Motor controllers Sensor data processing Bonus Skills Exposure to any of these is a plus: SLAM Computer Vision Autonomous Navigation RTK GPS Sensor Fusion Docker Web Dashboards PCB Debugging Motor Control Who Should Apply? We are looking for a builder, not just a programmer. Freshers and candidates with up to 3 years of experience can apply.

You are especially encouraged to apply if you have personally worked on: Robots Drones Embedded systems Autonomous vehicles IoT systems Formula Student / BAJA projects Robotics competitions College or personal engineering projects Candidates should be comfortable working with both hardware and software and troubleshooting problems on actual prototypes. What Matters to Us Certificates are valuable, but projects and practical problem-solving ability matter more. During the interview, be ready to explain or demonstrate something that you have personally designed, programmed or built.

If you enjoy working with code electronics sensors motors real machines, this role is for you.

📌 Robotics & Embedded Systems Engineer (Yelahanka)
🏢 Brookwoods Technologies Private
📍 Yelahanka