What you'll own

Machine operation and process

- Day-to-day running of UV flatbed and cylindrical/rotary printing equipment
- Print parameter optimisation — resolution, pass count, print speed, head height, curing settings — balanced against throughput and quality
- Jig and fixture design for holding parts flat, square and repeatable; part-to-print registration
- Cylindrical printing specifically: chuck setup and alignment, rotation synchronisation, handling tapered and non-uniform bottle profiles, maintaining head gap over a curved surface
- White ink and varnish layer management, including build strategy and cure between layers

Maintenance and uptime

- Own daily, weekly and monthly preventive maintenance and make it stick — nozzle checks, capping station and wiper condition, purging routines, encoder strip and rail cleaning, filter and damper changes, waste ink management
- Printhead health as a first-order priority: nozzle deviation, clog prevention and recovery, alignment and calibration, and knowing when a head is genuinely finished versus recoverable
- Ink system management — circulation, white ink settling, ink lines, degassing, filtration
- UV LED lamp condition and curing energy verification; identifying intensity degradation before it shows up as adhesion failure
- Diagnose and correct print defects — banding, nozzle dropout, misregistration, orange peel, incomplete cure, colour variation
- Root-cause recurring failures rather than repeatedly fixing them. A defect that comes back monthly hasn't been solved

Substrate, adhesion and curing

- Qualify new substrates: adhesion testing, primer selection, surface preparation and treatment
- Establish and document validated print recipes per substrate and per product




- Control environmental factors that quietly destroy quality — dust, temperature, humidity, static

Colour and RIP interface

- Manage RIP-side settings for the UV equipment and keep our machines in a calibrated state
- Work alongside our colour management specialist, who owns profile creation. You own machine condition; they own colour standards. Both of you are needed for output to be right, and the boundary should be treated as a collaboration rather than a handover

Spares, vendors and continuity

- Build and maintain a critical spares list with realistic lead times, and hold what needs holding. Printheads and long-lead items are where a small stock decision prevents weeks of stoppage
- Manage OEM and dealer relationships, AMC contracts and service escalation; hold vendors to response commitments
- Maintain a downtime log with cause codes, and report honestly on what's actually costing us hours

People and documentation

- Write SOPs an operator can follow without you present
- Train operators across shifts and verify they can actually do it, not just that they attended
- Deliberately transfer knowledge rather than accumulate it

What we're looking for

Must have

- 4+ years hands-on with UV inkjet printing equipment — flatbed, cylindrical, or both
- Real printhead-level competence: maintenance, alignment, clog diagnosis and recovery.



This is the single most important technical requirement
- Working knowledge of UV LED curing, ink chemistry behaviour, and adhesion on varied substrates
- Demonstrated preventive maintenance discipline — you can describe a PM regime you built and sustained, not just one you were handed
- Systematic fault diagnosis. You isolate cause across machine, ink, substrate, environment and file rather than guessing
- RIP software familiarity — any of ONYX, Wasatch, Fiery, Caldera, ErgoSoft, or OEM RIPs such as RasterLink or VersaWorks
- Comfortable with mechanical and electrical maintenance at component level
- Able to train operators and write documentation in language they'll actually use
- Hindi and English

Positive to have

- Specific experience on Mimaki UJF or JFX, Roland LEF or VersaUV, Mutoh, Epson, or comparable Chinese-built UV flatbeds
- Rotary and cylindrical printing — bottles, tumblers, mugs, drinkware
- Experience as a service engineer with an OEM or machine dealer — see the note below, we rate this highly
- Printing on plastics, coated substrates and metals; primer and surface treatment experience
- Colour management fundamentals — linearisation, ink limiting, profile behaviour
- Jig and fixture design; basic CAD
- Screen printing, pad printing or sublimation exposure
- Maintenance data practice — OEE, MTBF, MTTR, downtime analysis

A note on background: engineers who have worked for a UV machine OEM or dealer are strongly encouraged to apply. Servicing many machines across many customers builds a diagnostic range that's hard to acquire running one or two machines in one plant, and it's exactly the experience that prevents stoppages here.

📌 UV Printing Technical Engineer — Production (New Delhi)
🏢 SB eCommerce Solutions
📍 New Delhi