INGSOL Labs is hiring a Hardware Design Engineer to work on custom IoT and edge gateway hardware for industrial
applications. You'll work alongside senior hardware and firmware engineers on production hardware — not isolated
coursework — designing, bringing up, and debugging real boards from schematic to field deployment.
Schematic design and PCB layout for embedded/IoT boards (power, digital, mixed-signal)
Component selection with cost, availability, and industrial-grade (temperature, EMI/EMC) constraints
Prototype bring-up and debug using multimeter, oscilloscope, logic analyzer, JTAG/SWD
Interface design for industrial I/O: RS-485/RS-232, digital/analog I/O, Ethernet, USB
Write and debug low-level firmware for peripheral bring-up and board validation
Collaborate with the firmware/software team on hardware-software integration
Support design-for-manufacturing (DFM) and design-for-test (DFT) reviews, and coordinate with PCB fabrication/assembly vendors
Document design files, BOMs, and test procedures

Requirements
B.Tech/B.E. in Electronics, Electrical,



Instrumentation, or related field (fresher to 2 years experience)
Working knowledge of KiCad or Altium (schematic capture and PCB layout)
Hands-on project experience with visible debugging effort on a bare-metal ARM microcontroller (STM32 or similar Cortex-M) — worked at the register/peripheral level, not just library-abstracted code
Embedded C/C++ firmware experience at the peripheral/driver level (GPIO, UART, SPI, I2C, ADC)
Solid fundamentals in digital/analog electronics, power supply basics, and microcontroller architecture
Comfortable reading datasheets and application notes independently.

Preferred Qualifications
Exposure to industrial protocols: Modbus, RS-485, CAN
Familiarity with ARM-based SoCs/SBCs (e.g., NXP i.MX series) and/or Intel x86 embedded SoCs (N-series, Atom x7000RE)
Embedded Linux basics (Yocto/Buildroot, image flashing/booting, device tree)
4

📌 Hardware Design Engineer Noida
🏢 INGSOL
📍 Noida