Installer cum Programmer – Home Automation

Department: Projects / Technical

Job Location: Delhi NCR

Experience: 1–5 Years

Employment Type: Full-Time

About the Role

We are looking for an Installer cum Programmer – Home Automation who will be responsible for the installation, wiring, configuration, programming, testing and commissioning of home automation systems at residential and commercial project sites.

The candidate should have hands-on experience in electrical/electronic installation and a good understanding of KNX-based automation systems. The role requires both site execution and programming skills.

Key Responsibilities

1. Home Automation Installation

- Install and configure home automation devices and equipment at project sites.
- Carry out installation of automation modules, sensors, actuators, touch panels, switches, dimmers and other automation products.
- Perform control panel and field-device installation as per project requirements.
- Handle wiring, termination, labelling and cable management.
- Read and understand electrical drawings, wiring diagrams and automation layouts.
- Ensure proper installation of devices as per project specifications.

2. KNX Programming & Configuration

- Perform KNX programming and configuration for home automation projects.
- Configure KNX devices using ETS software.
- Create and configure group addresses and communication objects.
- Program lighting, dimming, curtain/blind control, HVAC and other automation functions.
- Configure scenes, schedules and automation logic as required.
- Download and commission KNX programs into field devices.
- Troubleshoot KNX communication and programming-related issues.

3. Testing & Commissioning

- Test installed automation systems and verify proper functioning.
- Commission automation systems at project sites.
- Conduct point-to-point testing of devices.
- Identify and rectify wiring,



communication and programming issues.
- Coordinate with Project Engineers and Project Managers during commissioning.
- Ensure the system is functioning according to the approved project requirements.

4. Site Execution

- Visit client/project sites for installation, programming and troubleshooting.
- Coordinate with electricians, contractors, Project Engineers and other site teams.
- Ensure work is completed within the project timeline.
- Maintain proper documentation of installation and commissioning activities.
- Report site issues, material requirements and project progress to the reporting manager.

5. Troubleshooting & Support

- Diagnose hardware, wiring, network and programming-related issues.
- Provide technical support during installation and after commissioning.
- Attend site complaints related to automation systems.
- Identify the root cause of system failures and implement appropriate solutions.

Required Technical Skills

- Hands-on experience in Home Automation Installation.
- Good knowledge of KNX automation systems.
- Practical experience with KNX programming and ETS software.
- Understanding of KNX topology and bus communication.
- Knowledge of electrical wiring and termination.
- Understanding of basic networking concepts such as IP addressing, switches and LAN connectivity.
- Ability to read electrical and automation drawings.
- Knowledge of sensors, actuators, relays, dimmers and automation controllers.
- Basic troubleshooting skills for electrical, networking and automation systems.




- Ability to use basic electrical testing tools and installation tools.

Preferred Knowledge Experience with any of the following will be an advantage:

- KNX
- ETS / ETS6
- DALI
- Modbus
- BACnet
- HVAC control
- Lighting control
- Curtain/Blind automation
- IP-based automation
- Home automation gateways
- Access control
- Video door phones
- Smart home systems

Educational Qualification

- ITI / Diploma / B.Tech / B.E. in Electrical, Electronics, Electronics & Communication, Instrumentation or a related field.
- Candidates with strong practical experience in home automation may also be considered.

Experience 1–5 years of relevant experience in:

- Home Automation
- Building Automation
- Electrical Automation
- KNX Installation & Programming
- Smart Home Installation
- ELV / Automation Projects

Freshers with strong practical KNX knowledge and relevant training may also be considered for junior positions.

Key Competencies

- Strong hands-on technical skills
- Positive troubleshooting ability
- Willingness to work at project sites
- Ability to work independently as well as in a team
- Good communication and coordination skills
- Ability to understand technical drawings and project requirements
- Attention to detail
- Ability to work under project timelines
- Willingness to travel to client/project sites when required

Key Performance Areas (KPIs)

- Quality and accuracy of installation
- Timely completion of assigned site work
- Successful KNX programming and commissioning
- Number of installation/programming issues resolved
- Reduction in repeat site visits due to installation errors
- Proper documentation of project work
- Client/site team coordination
- Adherence to safety and project standards

Pay: ₹366,383.60 - ₹701,476.17 per year

Benefits

- Cell phone reimbursement
- Provident Fund

Work Location: In person

📌 Installer cum Programmer (Delhi)
🏢 Ezhomz Solutions
📍 Delhi