Position: Manager Electronics & Embedded Systems

Department: Electronics & Embedded Systems

Experience: 10–15 years

Location: Gurugram, Haryana

Reports To: Director

Preferred Background: UAV/Drone, Aerospace/Avionics, Defence Electronics, Automotive, Robotics

Role Summary

Own the complete electronics and embedded technology architecture for IoTechWorld's UAV platforms — from concept and design through validation and production. The role is responsible for building an independent, in-house electronics capability and reducing dependence on external and partner engineering teams.

Educational Qualification

- B.E. / B.Tech in Electronics, Electronics & Communication engineering discipline.
- M.E. / M.Tech / M.S. in Electronics / Embedded Systems / VLSI
- Consistent academic record from a recognised institution.

Experience

- 10–15 years of hands-on experience in electronics and embedded systems design and development.
- Minimum 3–5 years in a technical leadership or team-lead role, having led hardware and firmware engineers.
- Demonstrated experience taking electronics products from concept through validation to production.
- Direct experience developing or maintaining UAV flight controllers (STM32H7-class), including firmware, sensor integration and flight-testing.
- Preferred prior experience in UAV/Drone, Aerospace/Avionics, Defence Electronics, Robotics or Industrial Electronics.

Key Responsibilities

- Define electronics architecture for UAVs, including Flight Controller, Power, BMS, GNSS, IMU, RF, sensors and payload interfaces.
- Recruit, build and lead the in-house Hardware, PCB, Firmware, RF and Test teams.
- Drive MCU/processor selection, embedded firmware,



communication protocols and system integration.
- Get parts developed by review schematics PCB designs, BOMs and component selection personally.
- Establish design standards for reliability, EMI/EMC and defence/environmental requirements.
- Lead the system integration team for recent Drone development.
- Lead prototype development, debugging, validation and production release.
- Build internal electronics IP and reduce dependence on external/partner teams.
- Ensure designs are manufacturable, cost-effective and scalable, working closely with the manufacturing function.
- Manage technical vendors and external development partners.

Technical Skills — Must Have

- Deep hands-on experience with STM32 microcontrollers (STM32H7 / Cortex-M7 class) — architecture, peripherals, low-level programming and debugging.
- Strong firmware development in C and C++ for embedded / real-time flight-controller applications.
- Complete command of communication protocols — UART, SPI, CAN and I²C — including driver development and bus-level debugging.
- Working experience with Linux for embedded systems and companion-computer / payload integration.
- Experience developing or working on drone flight controllers comparable to the IoTech FC: STM32H743-class MCU, triple-IMU redundancy (e.g. ICM-42688 + BMI088), EKF tuning, sensor fusion,



temperature calibration and thermal-drift compensation.
- Knowledge of IMU / sensor stacks (ICM-42688, BMI088, ADIS16470-class), gyro/accelerometer noise characterisation and IMU calibration.
- Familiarity with FC I/O and logging architecture — 14x PWM outputs, CAN bus, SD/FRAM logging and payload interfaces.

Technical Skills — Preferred

- RF and communication systems — telemetry links, video transmission, Software-Defined Radio (SDR) and FHSS.
- Camera systems, integration and communication — EO/IR and mapping/LiDAR payloads, camera interfaces and communication.
- Electronic Speed Controllers (ESC) and BLDC motors — control, tuning and integration.
- GNSS / GPS systems and antenna integration — receiver selection, antenna integration and RF placement.
- Experience with the ArduPilot and/or PX4 ecosystems and firmware customisation.

Additional Requirements

Direct drone-industry experience is preferred but not mandatory. UAV-relevant embedded systems depth from adjacent fields is fully acceptable: Aerospace/Avionics and Defence Electronics (reliability, EMI/EMC, environmental qualification); Automotive (BMS, CAN, functional safety, high-volume manufacturability); and Robotics (sensor fusion, GNSS/INS, real-time control). Priority is given to strong technical depth combined with process discipline and the ability to build an in-house capability from the ground up.

Leadership Requirement

- A hands-on technical leader, not only a people manager. Must be capable of reviewing designs personally, solving difficult technical problems, and building a strong, independent in-house electronics capability.

📌 Embedded Firmware ManagerARM) (Gurugram)
🏢 IoTechWorld Avigation
📍 Gurugram