Job Title: CSWIP 3.1 Certified Welding Inspector – Mechanical QA/QC

Job Location: Dahej, Gujarat

Job Type: Full-Time, Contractual / Project Deputation

Salary: ₹8,00,000 – ₹10,00,000 per annum (CTC)

Total Experience: Minimum 5 Years

Joining: Immediate Joiners Only

Certification: CSWIP 3.1 – Mandatory

Job Summary

We are looking for experienced CSWIP 3.1 Certified Welding Inspectors / Mechanical QA-QC Inspectors for a project at Dahej, Gujarat.

Candidates must have a valid CSWIP 3.1 Welding Inspector Certification and hands-on experience in mechanical fabrication, welding inspection, dimensional inspection, material inspection, and quality documentation.

Important: CSWIP 3.1 certification is compulsory. Candidates without this certification will not be considered. A minimum of 2 years of relevant hands-on inspection experience after obtaining CSWIP 3.1 is mandatory.

Educational Qualification

- Diploma or B.E./B.Tech in Mechanical Engineering – Mandatory.
- CSWIP 3.1 Welding Inspector Certification – Mandatory.

Experience Required

- Minimum 5 years of relevant Mechanical QA/QC or inspection experience.
- Minimum 2 years of relevant hands-on inspection experience after obtaining CSWIP 3.1 certification.
- Practical experience in mechanical fabrication and welding inspection is essential.

Key Responsibilities

1. Welding Inspection

- Perform visual inspection of weld joints, plates, and fabricated components.
- Conduct weld fit-up and visual inspections.
- Verify welding activities as per approved drawings, specifications, and procedures.
- Review WPS/PQR documents and welder qualification records.
- Identify welding defects and coordinate corrective actions with fabrication teams.
- Verify weld identification and material traceability.

1. Dimensional Inspection

- Inspect fabricated components as per approved engineering drawings.
- Check dimensions, alignment, levels, orientation, thickness, diameter, and height.
- Verify fabrication tolerances and report deviations.
- Prepare dimensional inspection reports.

1. NDT Inspection and Coordination





- Coordinate and review Non-Destructive Testing (NDT) activities.
- Working knowledge of VT, PT/DPT, MT/MPI, UT, and RT is required.
- Verify NDT requirements and review reports against applicable acceptance criteria.

1. Material Inspection

- Inspect Carbon Steel (CS), Stainless Steel (SS 316), cladded plates, and fabricated components.
- Verify Material Test Certificates (MTCs), heat numbers, material grades, and traceability.
- Ensure materials comply with approved drawings and project specifications.

1. Fabrication and Equipment Inspection

- Inspect structural members, fabricated assemblies, and mechanical components.
- Perform fit-up, alignment, welding, and final inspections.
- Experience in heavy fabrication, storage tanks, large equipment, shells, nozzles, and structural fabrication will be preferred.

1. Quality Documentation

- Prepare and maintain inspection reports, welding inspection reports, dimensional reports, material inspection records, NDT records, inspection checklists, punch lists, and final inspection documents.
- Ensure compliance with Inspection and Test Plans (ITPs), quality control plans, project specifications, and applicable standards.

Technical Skills Required

- CSWIP 3.1 Welding Inspector Certification.
- Mechanical fabrication and welding inspection.
- Engineering and fabrication drawing interpretation.
- Material inspection and traceability.
- Working knowledge of WPS/PQR, ITPs, and quality documentation.
- Familiarity with EN 1090, relevant EN standards, and applicable ASME/API/project standards.
- Basic computer knowledge and proficiency in MS Word and MS Excel.
- Good communication, reporting, and coordination skills.





Preferred Industry Experience Candidates with experience in the following sectors will be preferred:

- Oil & Gas and Petrochemical Projects.
- Heavy Mechanical Fabrication.
- Storage Tank Fabrication.
- Structural Fabrication.
- Large Fabricated Equipment.
- Process and Industrial Equipment.
- Carbon Steel, SS 316, and Cladded Components.

NDT Level-II certification in VT/PT/MT/UT/RT will be an added advantage. Shift Timings The position requires rotational shifts according to project requirements.

- Shift A: 7:30 AM to 4:00 PM
- Shift B: 3:30 PM to 12:00 AM (Midnight)
- Shift C: 11:00 PM to 7:00 AM

Each shift includes a 30-minute meal break. The working week consists of six days, with shifts allotted on a rotational basis. Overtime, where required, will be compensated as per applicable labour laws and company policy. Salary, Benefits and Joining

- Annual CTC: ₹8 LPA to ₹10 LPA.
- Accommodation: Accommodation will be provided by the company as per company policy.
- Joining: Immediate joiners only.
- Work Location: Project / Fabrication Site, Dahej, Gujarat.
- Employment Type: Full time, Contractual / Project Deputation.
- Candidates must be comfortable working rotational shifts and a six-day workweek.

How to Apply Interested and eligible candidates can share their updated resume at:

Email: [email protected]

Please mention “CSWIP 3.1 Certified Welding Inspector – Dahej” in the email subject line.

Mandatory Eligibility Criteria

- Valid CSWIP 3.1 Welding Inspector Certification.
- Minimum 5 years of relevant Mechanical QA/QC or inspection experience.
- Minimum 2 years of relevant hands-on inspection experience after obtaining CSWIP 3.1.
- Diploma or B.E./B.Tech in Mechanical Engineering.
- Availability for immediate joining and work at Dahej, Gujarat.

Candidates who do not meet the mandatory CSWIP 3.1 certification and post-certification experience requirements will not be considered. Pay: ₹50,000.00 - ₹80,000.00 per month

Work Location: In person

📌 CSWIP 3.1 Certified Welding Inspector – Mechanical QA/QC (Dahej)
🏢 DYC GLOBAL
📍 Dahej