1. Process Improvement — Engineer (Odhav: Unit 01)

- Open Positions: 1
- Qualification: Adv Diploma in Foundry (NIFFT)
- Experience: 3 to 4 Years
- Max CTC Budget: ₹45K ~ ₹50K per month
- Location: Ahmedabad
- Preferred Industry: Foundry, Steel, or Metal
- Job Responsibilities:
- Prepare process and 5S audit checklists.
- Drive root cause analysis (RCA) and implement corrective actions (CA).
- Improve process efficiency and optimize material flow.
- Execute foundry process audits utilizing basic foundry process knowledge.
- Utilize MS Office for documentation and coordinate cross-functionally.

2. Drawing / Maintenance — Draughtsman (Mechanical)

Odhav (Unit 03) — Experienced

- Open Positions: 1 | Experience: 1 to 2 Years
- Qualification: ITI Draughtsman (Mechanical)
- Max CTC Budget: ₹21K per month

Kerala GIDC (Unit 20) — Apprentice

- Open Positions: 1 | Experience: Fresher
- Qualification: ITI Draughtsman (Mechanical)
- Max CTC Budget: ₹16K per month
- Location / Joining: Ahmedabad | 15 Days ~ 1 Month
- Preferred Industry: Manufacturing, Engineering, Foundry, or Steel
- Job Responsibilities:
- Prepare accurate 2D and 3D drawings.
- Take precise drawing measurements.
- Manage drawing release and scanning activities.

3. Drawing — Engineer (Odhav: Unit 03)

- Open Positions: 1
- Qualification: DME (Diploma in Mechanical Engineering)
- Experience: 2 to 3 Years
- Max CTC Budget: ₹30K per month
- Location / Joining: Ahmedabad | 15 Days ~ 1 Month
- Preferred Industry: Manufacturing & Engineering
- Job Responsibilities:
- Prepare and release recent hardware drawings for orders.
- Generate and maintain the drawing database.
- Operate AutoCAD and SolidWorks software proficiently.

4. Installation — Engineer (Odhav: Unit 03)

- Open Positions: 1
- Qualification & Experience: DME (2 Years) OR ITI Draughtsman Mechanical (5 Years)
- Max CTC Budget: ₹38K per month
- Location / Joining: Ahmedabad | 15 Days ~ 1 Month
- Travel Requirement: Ready to travel 20 to 25 days a month.
- Job Responsibilities:




- Take physical measurements of various components on-site.
- Operate AutoCAD smoothly for installation layouts.
- Install components in Vertical & Horizontal Mills within the Thermal, Cement, and Mining industries.

5. Pattern Shop — State Apprentice (Odhav: Unit 05 & 13)

- Open Positions: 2 (1 per Unit)
- Qualification: ITI Draughtsman (Mechanical)
- Experience: Fresher
- Max CTC Budget: ₹16K per month
- Location / Joining: Ahmedabad | 15 Days ~ 1 Month
- Job Responsibilities:
- Assist in 2D / 3D drawing preparation.
- Perform basic drawing measurements.

6. Maintenance — Fitter / Technical Executive

Odhav (Unit 08) — Apprentice

- Open Positions: 2 | Experience: Fresher
- Max CTC Budget: ₹16K per month
- Working Conditions: Shift work, heights, confined spaces, dust, heat, and fumes.

Odhav (Unit 13) — Water Management Fitter

- Open Positions: 1 | Experience: 1 to 2 Years
- Max CTC Budget: ₹21K per month
- Specialization: Maintain Water Treatment systems, Cooling Towers, PHE, pumps, and compressors. Monitor and control pH, TDS, and Hardness.

Kerala GIDC (Unit 20) — Technical Executive

- Open Positions: 3 | Experience: 4 to 5 Years
- Max CTC Budget: ₹30K per month
- Specialization: Mechanical maintenance of foundry equipment (EOT Cranes, pumps, air compressors, cooling towers, shot blasting machines, swing frame grinders).
- Qualification: ITI (Fitter)
- Location / Joining: Ahmedabad | 15 Days ~ 1 Month

7. Maintenance — Electrician

Odhav (Unit 08) — Apprentice

- Open Positions: 1 | Experience: Fresher
- Max CTC Budget: ₹16K per month
- Working Conditions: Shift work, heights, confined spaces, dust, heat, and fumes.





Odhav (Unit 13) — Experienced Electrician

- Open Positions: 1 | Experience: 2 to 3 Years
- Max CTC Budget: ₹30K per month

Kerala GIDC (Unit 20) — Senior Electrician

- Open Positions: 3 | Experience: 3 to 5 Years
- Max CTC Budget: ₹30K per month
- Qualification: ITI (Electrician)
- Location / Joining: Ahmedabad | 15 Days ~ 1 Month
- Preferred Industry: Foundry, Heavy Manufacturing, or Steel
- Job Responsibilities:
- Execute preventive and breakdown electrical maintenance.
- Service foundry machinery: EOT Cranes, Induction Furnaces, Air Compressors, Sand Mixers, Reclaimers, Shotblasting machines, Motors, PDB Panels, VCB, and Transformers.

8. Moulding — Engineer

Odhav (Unit 12) — Senior Engineer

- Open Positions: 1 | Experience: 8 to 10 Years
- Qualification: ITI / DME
- Max CTC Budget: ₹54K per month
- Key Skills: Mixer machine calibration, Resin & Catalyst technicalities, refractory applications.

Kerala GIDC (Unit 20) — Shift Engineer

- Open Positions: 1 | Experience: 2 to 3 Years
- Qualification: DME
- Max CTC Budget: ₹35K per month
- Key Skills: Managing shift production, SOP/WI compliance, Clamping & Pouring, 5S & safety.
- Location / Joining: Ahmedabad | 15 Days ~ 1 Month
- Preferred Industry: Steel Casting Units / Foundry
- Job Responsibilities:
- Oversee operations in the Mould Shop and Core Shop.
- Manage mould & core making techniques and assembly.

9. Maintenance — Engineer (Odhav: Unit 13)

- Open Positions: 1
- Qualification: DME
- Experience: 2 to 3 Years
- Max CTC Budget: ₹30K per month
- Location / Joining: Ahmedabad | 15 Days ~ 1 Month
- Job Responsibilities:
- Maintain EOT Cranes, Induction Furnaces, Compressors, Sand Mixers, Reclaimers, and Shotblasting equipment.
- Perform breakdown analysis.
- Handle AutoCAD tasks and manage ISO documentation.

Intersted candidate Please call – (phone hidden) or (phone hidden)

Pay: ₹16,000.00 - ₹58,000.00 per month

Work Location: In person

📌 ITI - draftsman, fitter, Electrician, DME - Drafsman, Manchenical (Ahmedabad)
🏢 De Evaluation
📍 Ahmedabad