About the Company

Hi-Tech Supports & Hangers Pvt. Ltd. manufactures and supplies engineered pipe support systems and building support solutions for MEP, HVAC, plumbing, fire protection and industrial applications. The company executes projects with a focus on engineering quality, secure installation, compliance with approved drawings and specifications, timely execution, and customer satisfaction.

Job Purpose The Site Quality Engineer will be responsible for field-level quality inspection, verification of installation work against the latest approved drawings and project specifications, material inspection, quality documentation, inspection coordination, and timely closure of quality observations at the Hyderabad Data Centre project. The role requires regular site presence and close coordination with the site execution team, client, consultant, subcontractors and internal project team.

Key Roles & Responsibilities

1. Site Quality Inspection & Installation Verification

- Remain present at the project site and conduct routine, stage-wise and final inspections of installed works.
- Verify installation against the latest approved drawings, specifications, method statements, BOQ and applicable project requirements.
- Check installation alignment, level, location, dimensions, support spacing, anchoring, fixing, orientation, workmanship and overall finish, as applicable to the approved scope.
- Carry out visual inspections and maintain traceable records, including inspection date, location, activity, result, observations and closure status.
- Inspect completed work jointly with the Site Engineer, client/consultant representative and other concerned parties, as required.
- Identify deviations, defective workmanship, incomplete work and non-conformities; ensure correction and re-inspection before acceptance.

2. Drawing Review & Revision Control

- Read and interpret mechanical/MEP drawings, installation details, layouts, sections, schedules and relevant technical specifications.
- Compare old and current drawing revisions, identify changes affecting site installation and communicate them to the concerned team.
- Verify that site execution is based only on the latest approved/issued-for-construction drawing and approved revisions.
- Check drawing numbers, revision numbers, approval status and revision dates before inspection; prevent use of obsolete drawings.
- Raise RFIs / technical queries for unclear, conflicting or missing details and track responses before proceeding with affected work.

3. Inspection Requests & Quality Reports

- Prepare, submit, track and maintain SIR / Site Inspection Reports and inspection requests in the project-prescribed format.
- Coordinate inspection timing with the client, consultant, project team and subcontractors; ensure work is ready before requesting inspection.
- Record inspection status as accepted, rejected, partially accepted or requiring rework, as per the project's approved procedure.
- Track observations and punch points through to rectification, re-inspection and documented closure.
- Prepare daily/weekly quality status reports covering inspections, pending approvals, rejections, defects, NCRs and closure progress.

4. Material Inspection & Traceability

- Conduct and document MIR / Material Inspection Requests or Material Inspection Reports, as defined by the project's quality procedure.




- Verify material type, grade, size, quantity, identification, condition, damage, certificates, approved submittals and compliance with specifications.
- Check delivered materials against purchase/delivery documents, approved material submittals, drawings and relevant inspection criteria.
- Maintain material receiving, inspection, acceptance/rejection, storage, preservation and traceability records.
- Identify non-conforming or damaged materials, segregate/mark them where practicable, and notify the responsible team for disposition.

5. Joint Measurement & Site Records

- Prepare and maintain JMR / Joint Measurement Reports with the site team and client/consultant where applicable.
- Verify measured quantities, locations and completed work jointly, using approved drawings and agreed measurement procedures.
- Maintain inspection checklists, measurement sheets, daily quality logs, photographs, test records and signed approvals.
- Ensure records are legible, dated, revision-controlled, correctly filed and readily available for audits and client review.

6. Quality Assurance, NCR & Corrective Action

- Follow the approved Project Quality Plan, Inspection and Test Plan (ITP), method statements, checklists and acceptance criteria.
- Raise or support NCRs / quality observations for work or materials that do not meet requirements, in accordance with project procedures.
- Coordinate root-cause analysis, corrective and preventive actions, rework inspection and closure evidence.
- Monitor recurring quality issues and recommend preventive measures to reduce rework, wastage and repeat defects.
- Do not recommend acceptance of work that fails applicable approved criteria; escalate unresolved or critical quality issues promptly.

7. Coordination & Progress Support

- Coordinate daily with Site Engineers, supervisors, installation teams, subcontractors, stores and project management.
- Attend site coordination and quality meetings; communicate inspection requirements and drawing revisions to relevant teams.
- Plan inspections in line with site progress and required hold/witness points in the approved ITP.
- Verify that required inspections are completed and recorded before the work is covered, concealed or advanced to the next stage, where applicable.
- Support client, consultant, internal and third-party inspections and quality audits.

8. Tools, Instruments & Calibration

- Use and understand appropriate inspection and measuring instruments, including measuring tape, steel rule, spirit/box level, vernier caliper and other project-specified instruments.
- Know the correct application, handling, measurement range, reading method, limitations and care of each instrument used.
- Check calibration validity / calibration stickers and instrument identification before use; do not use damaged or out-of-calibration instruments for acceptance measurements.
- Maintain instrument issue, inspection and calibration records where assigned,



and report any instrument defect or expired calibration.

9. Handover & Final Quality Documentation

- Maintain an organized quality dossier for the assigned scope, including approved drawings, revisions, SIRs, MIRs, JMRs, checklists, material certificates, test reports, NCRs and closure records, as applicable.
- Verify completion of punch-list items and required inspections before final handover.
- Compile as-built / red-line mark-ups and final quality documents where required by the contract and project procedure.
- Support final client/consultant acceptance and ensure outstanding quality documents and observations are closed within agreed timelines.

Education & Experience

- Diploma in Mechanical Engineering is required; a relevant Mechanical Engineering degree may be considered an advantage.
- 46 years of hands-on experience in site quality inspection / QA-QC for mechanical, MEP, HVAC, industrial or construction projects.
- Experience in data centre projects, MEP installation, pipe supports/hangers or similar engineered installation works will be an advantage.
- Practical ability to read drawings, compare revisions, verify installation, document inspections and coordinate with client/consultant teams.

Technical Knowledge & Skills

- Strong drawing-reading and revision-control skills; ability to compare superseded and latest approved drawings.
- Working knowledge of visual inspection, installation quality checks, material inspection, inspection requests, checklists and quality records.
- Familiarity with SIR, MIR and JMR formats and project-specific QA/QC documentation; ability to follow the project's definitions and procedures.
- Knowledge of NCR, punch list, corrective/preventive action, ITP, method statements and inspection hold/witness points.
- Competent use of measuring tape, vernier caliper, spirit/box level and other relevant measuring instruments; awareness of calibration requirements.
- Basic MS Excel, Word, email and document-control skills for preparing logs, trackers and reports.
- Transparent communication, attention to detail, disciplined record keeping, problem-solving and professional coordination.

Key Performance Indicators (KPIs)

- Timely completion and accuracy of scheduled site inspections and inspection records.
- Compliance of installed work with latest approved drawings, specifications and acceptance criteria.
- Accuracy and completeness of SIR, MIR, JMR and other assigned quality documentation.
- Timely identification, communication, rectification and closure of observations / NCRs.
- Reduction in repeat defects, rework and avoidable quality-related delays.
- Proper control of drawing revisions and prevention of work based on obsolete drawings.
- Validity and traceability of measurement instruments and inspection records.
- Readiness of quality documents for client inspections, audits and project handover.

Personal Attributes

- Strong attention to detail and quality-focused mindset.
- Proactive, disciplined and comfortable working full-time at an active project site.
- Able to communicate inspection findings clearly and maintain professional relationships.
- Willingness to coordinate with multiple teams and escalate critical quality risks promptly.
- Commitment to safe work practices, accurate records and compliance with approved procedures.

📌 Quality Site Engineer (Hyderabad)
🏢 Hi Tech Supports Hangers
📍 Hyderabad