JD 1 — CNC Turning Operator

Item

Detail

Department

Production — CNC Turning

Reports to

Shift In-charge / Production Manager

Location

Bengaluru (shop floor)

Experience

2–6 years on CNC turning centres

Qualification

ITI (Turner / Machinist) or Diploma in Mechanical Engineering

Positions

Open question — number to hire

Shift

General and rotational shifts

Role summary: Set up and run CNC turning centres to produce precision turned parts to drawing, on time and right first time.

Key responsibilities

- Read and interpret engineering drawings, GD&T; callouts and route cards.
- Set up the machine: load program, mount chuck jaws and tools, set work and tool offsets.
- Run first-off, get first-piece inspection approved, then run the batch.
- Measure parts in-process with vernier, micrometer, bore gauge, height gauge and thread gauges; record in the inspection report.
- Adjust wear offsets to hold tolerances (typically ±0.01 mm).
- Make minor program edits on Fanuc / Mitsubishi controls under supervision.
- Monitor tool life, change inserts and log tool usage.
- Fill daily production and downtime records used for OEE.
- Follow 5S, safety rules and AS9100D practices: FOD control, traceability, non-conforming part segregation.
- Do daily machine checks (lubrication, coolant, air pressure) and report abnormalities.

Skills required

- Hands-on operation of CNC lathes / turning centres (Fanuc or Mitsubishi preferred)
- G-code and M-code basics; offset setting and tool nose radius compensation
- Turning, facing, boring, grooving, threading and parting operations
- Use of precision measuring instruments
- Working with aluminium, steels, stainless steel; titanium or Inconel is a plus
- Basic drawing reading and GD&T; awareness

Preferred

- Experience in aerospace or defence components
- Exposure to bar feeders, sub-spindle or live-tool (mill-turn) machines

JD 2 — CNC Milling (VMC) Operator

Item

Detail

Department

Production — CNC Milling / VMC

Reports to

Shift In-charge / Production Manager

Location

Bengaluru (shop floor)

Experience

2–6 years on VMC / CNC milling machines

Qualification

ITI (Machinist / Fitter) or Diploma in Mechanical Engineering

Positions

Open question — number to hire

Shift

General and rotational shifts

Role summary:



Set up and run vertical machining centres to produce precision milled parts to drawing, holding tight tolerances and surface finish.

Key responsibilities

- Read drawings, GD&T;, route cards and setup sheets.
- Mount fixtures and vices, clock and align the job, set work offsets (G54–G59) with edge finder or probe.
- Load tools into the magazine, set tool lengths and diameters, verify the tool list against the program.
- Dry-run and prove new programs carefully; get first-piece inspection approved before batch run.
- Measure in-process with vernier, micrometer, height gauge, bore gauge, slip gauges and thread plug gauges.
- Adjust offsets to hold tolerances (typically ±0.01 mm) and required surface finish.
- Make minor edits on Fanuc / Mitsubishi controls under supervision; never run unapproved programs.
- Monitor tool wear and coolant; change tools and report breakages.
- Record production, rejections and downtime for OEE tracking.
- Follow 5S, safety, FOD control, traceability and AS9100D practices.

Skills required

- Hands-on VMC operation (Fanuc or Mitsubishi preferred)
- Work and tool offset setting; G-code and M-code basics
- Face milling, pocketing, profiling, drilling, tapping, reaming, boring
- Fixture setting and job alignment with dial indicator
- Use of precision measuring instruments
- Working with aluminium, steels, stainless steel; titanium or Inconel is a plus

Preferred

- Aerospace or defence part experience
- Exposure to 4th-axis / 5-axis machining, Renishaw probing, or HMC

JD 3 — CAM Programmer

Item

Detail

Department

Engineering / NPD

Reports to

Production Manager

Location

Bengaluru

Experience

4–8 years in CNC / CAM programming, including shop-floor proving

Qualification

Diploma or BE in Mechanical / Production Engineering

Positions

Open question — number to hire

Shift

General shift; support to production shifts when needed

Role summary: Create, prove and optimise CNC programs for turning and milling,



turning customer drawings and 3D models into right-first-time parts at the lowest cycle time.

Key responsibilities

- Study customer drawings, 3D models and GD&T; plan the process route, operations and fixturing.
- Generate CNC programs for turning, VMC and multi-axis machines using CAM software.
- Select tools, cutting parameters and toolpath strategies (adaptive / HSM roughing, finishing).
- Configure and maintain post-processors for Fanuc and Mitsubishi controls.
- Run toolpath simulation and machine verification to prevent collisions and gouges.
- Prepare setup sheets, tool lists and process sheets for operators.
- Prove out programs on the machine with operators and approve first-off parts.
- Reduce cycle time and tool cost on running parts; support SMED for faster changeovers.
- Design or specify simple fixtures and work-holding with the toolroom.
- Support new product development: RFQ cycle-time estimates, feasibility and FAI (AS9102).
- Maintain program version control and documentation per AS9100D.
- Train operators on recent programs and setups.

Skills required

- Strong CAM skills in one or more of: Mastercam, NX CAM, Fusion 360, PowerMill, hyperMILL, SolidCAM, ESPRIT
- Manual G-code programming and editing on Fanuc and Mitsubishi controls
- 3D CAD modelling (SolidWorks, NX, Creo or CATIA)
- Cutting tool selection and speeds / feeds for aluminium, steels, stainless, titanium and Inconel
- GD&T; and tolerance-stack understanding
- Process planning and cycle-time estimation

Preferred

- 4-axis / 5-axis simultaneous and mill-turn programming
- Aerospace / defence experience with FAI (AS9102) and export customers
- Vericut or similar machine simulation

Common terms and how to apply

What we offer

- Work on aerospace, defence and export-grade precision components
- Training on new machines, AS9100D practices and shop-floor improvement (5S, SMED, OEE)
- Statutory benefits (PF, ESI as applicable), shift allowance and overtime as per company policy
- Clear growth path: Operator → Setter → Shift In-charge; Programmer → Senior Programmer / NPD Lead

Pay: ₹30,000.00 - ₹50,000.00 per month

Benefits

- Food provided
- Health insurance
- Internet reimbursement
- Paid sick time

Work Location: In person

📌 CNC & VMC Operator, CNC& VMC Setter, Mastercam Programar (Bengaluru)
🏢 Das Steigen
📍 Bengaluru