Role & responsibilities

1. ADAS System Integration: Responsible for end-to-end vehicle integration of AEBS (Advanced Emergency Braking System), LDW (Lane Departure Warning), BSIS (Blind Spot Information System), MOIS (Moving Off Information System) and DDAW (Driver Drowsiness &
- Attention Warning) functions in coordination with ZF and internal vehicle engineering teams.

- HW/SW Integration: Lead integration of ADAS ECUs, camera, radar and associated sensors with VCU, ABS/EBS, instrument cluster, gateway and other vehicle ECUs, including CAN/CAN-FD communication, power supply, wake-up/sleep, diagnostics and software compatibility.

- Vehicle E/E Interface Definition: Own and review system requirements, ICD/interface specifications, CAN DBC, signal mapping, diagnostic requirements, network topology and functional interactions between the ZF ADAS solution and vehicle ECUs.

- ADAS Component Packaging: Coordinate packaging and vehicle installation of front camera, radar, corner/side sensors, ADAS ECU, brackets, harnesses and connectors, considering sensor Field of View, mounting tolerances, vibration, environmental protection, serviceability and vehicle build feasibility.

- Vehicle Calibration: Plan and execute camera/radar static and dynamic calibration, sensor alignment and vehicle-specific calibration/tuning activities jointly with ZF to achieve required ADAS functional performance across different vehicle variants.

- ADAS Functional Testing: Develop and execute vehicle-level test plans for AEBS, LDW, BSIS, MOIS and DDAW, covering normal operation, boundary conditions, sensor limitations, warning strategy, braking intervention, CAN communication failures and degraded/fail-protected conditions.

- Diagnostics &

- DTC Management: Define and validate UDS diagnostics, DTCs, DID/RID requirements, fault detection, fault recovery, sensor misalignment detection, communication faults and diagnostic service-tool requirements for ADAS ECUs.

- EOL Integration: Define End-of-Line (EOL) requirements for ADAS systems, including ECU identification, configuration/coding, software version verification, DTC check/clear, sensor health check, camera/radar calibration/alignment status and final functional verification at the manufacturing plant.

- Vehicle Network &

- Communication Debugging: Perform CAN/CAN-FD analysis using tools such as Vector CANoe/CANalyzer to troubleshoot missing/incorrect signals, message timing, network management, timeout, communication DTCs and functional integration issues.

- Supplier Technical Coordination: Act as the primary vehicle integration interface with ZF for requirements clarification, HW/SW release planning, calibration updates, defect resolution,



vehicle testing, software flashing and technical issue closure.

- Software &

- Configuration Management: Manage ADAS software, calibration and configuration releases across prototype, development, validation and production vehicles, ensuring correct HW/SW/calibration compatibility and vehicle-variant configuration.

- Vehicle-Level Performance Validation: Evaluate system performance under different vehicle speeds, loads, road conditions, lane conditions, day/night operation and environmental conditions, documenting functional gaps and coordinating corrective actions.

- Failure &

- Degraded-Mode Validation: Verify ADAS behavior during sensor blockage, sensor misalignment, communication loss, low-voltage conditions, ECU faults and other relevant failures, ensuring appropriate driver warnings, DTC setting and graceful degradation.

- Field Issue Analysis: Lead investigation of ADAS-related field/vehicle issues, including vehicle data collection, CAN trace analysis, DTC analysis, software/calibration comparison, reproduction of field complaints and structured root-cause analysis jointly with ZF.

- Issue Resolution &

- RCA: Drive systematic problem-solving using methods such as 8D, 5-Why, fault-tree analysis and fishbone analysis, coordinating HW, SW, vehicle, electrical, brake, manufacturing, quality and supplier teams until closure.

- Brake System Interface: Coordinate AEBS functional integration with the ABS/EBS/braking system, ensuring correct request/acknowledgement interfaces, vehicle-state information, brake intervention behavior and fault/degraded-mode handling.

- Driver HMI Integration: Integrate ADAS visual and audible warnings with the instrument cluster/HMI, including AEBS collision warnings, LDW warnings, blind-spot/moving-off warnings, DDAW indications, tell-tales and ADAS malfunction/status indications.

- Harness &

- Electrical Integration: Review ADAS electrical interfaces including power supply, grounding, fusing, connectors, CAN termination, wiring harness routing, sensor cables and EMC-sensitive routing, and support prototype/production harness releases.

- Verification &

- Validation Documentation: Prepare and maintain DVP&R;, integration test specifications, test cases, calibration reports, problem reports, issue trackers,



CAN trace evidence and vehicle validation reports to support design release and production readiness.

- Production &

- Vehicle Build Support: Support prototype, DV/PV and production vehicle builds, ensuring correct ADAS HW, SW, calibration, sensor mounting, harness connectivity, ECU configuration, diagnostics and EOL process readiness.

- Cross-Functional Coordination: Work closely with Vehicle Integration, E/E Architecture, Brakes, VCU, Embedded Software, Homologation, Manufacturing, Quality, Service and supplier teams for overall ADAS integration and vehicle sign-off.

- Compliance &

- Homologation Support: Support engineering validation and homologation activities against the applicable ADAS regulatory requirements and vehicle-market requirements, working with homologation teams to ensure required evidence and system performance are available.

- Engineering Change Management: Evaluate ADAS impact due to changes in vehicle dimensions, wheelbase, tyre size, suspension, cab geometry, windshield, bumper, sensor bracket, payload/configuration or E/E architecture, and coordinate required recalibration or revalidation.

- Production &

- Service Diagnostics: Support development of plant and service diagnostic procedures, troubleshooting guidelines, sensor replacement/calibration procedures, DTC interpretation and service-tool requirements.

- System Maturity &

- Sign-Off: Own ADAS vehicle-integration maturity tracking from prototype to SOP, maintaining open-issue lists, supplier action tracking, validation status, software/calibration maturity and release-readiness reports.

Required Technical Competencies

- Strong understanding of ADAS functions: AEBS, LDW, BSIS, MOIS and DDAW

- Hands-on experience with camera/radar-based ADAS systems

- Vehicle-level HW/SW integration and troubleshooting

- Good understanding of CAN, CAN-FD, DBC and UDS diagnostics

- Experience with Vector CANoe/CANalyzer or equivalent network-analysis tools

- Knowledge of camera/radar calibration and sensor alignment

- Understanding of ABS/EBS interfaces, particularly for AEBS integration

- Experience with DTC definition, diagnostics and EOL testing

- Experience in vehicle-level test planning, DVP&R; and validation

- Understanding of sensor packaging, Field of View and mounting constraints

- Experience with ECU flashing, software/calibration/configuration management

- Strong capability in CAN trace analysis, fault reproduction and root-cause analysis

- Exposure to commercial-vehicle electrical/electronic architecture

- Knowledge of automotive development processes, including ASPICE and ISO 26262, is preferred.

📌 ADAS Integration Engineer (Chennai)
🏢 Montra Electric
📍 Chennai