Field Application Engineer Electronic Systems Design - Bengaluru

Field Application Engineer Electronic Systems Design - Bengaluru

16 Oct
|
Recognized
|
Bengaluru

16 Oct

Recognized

Bengaluru

The Role



As a Field Application Engineer — Electronic Systems Design, you will be the technical authority for GSAS's PCB design and manufacturing preparation portfolio. You'll work with hardware design teams, signal integrity engineers, manufacturing/NPI groups, and engineering managers across automotive, aerospace, defense, industrial, medical, and telecom sectors to help them evaluate, deploy, and get the most out of professional and enterprise -grade EDA tools — from schematic capture and constraint -driven layout through signal/power integrity analysis, DFM validation, and manufacturing handoff.



This role spans the full board -level design chain. You'll support customers using enterprise PCB design platforms for complex multi -layer, high -speed boards as well as teams on professional -tier tools who are stepping up from free or entry -level environments. You'll also work with manufacturing engineers and NPI teams on design -to -factory readiness — DFM analysis, test point optimization, panelization, and ODB++/Gerber validation. The common thread is that you understand what it takes to turn a schematic into a functioning, manufacturable board.



Key Responsibilities



Deliver technical demonstrations, evaluations, and proof -of -concept engagements across the full PCB portfolio — enterprise -grade schematic capture and constraint -driven layout for complex designs, professional -tier design tools for small teams and independent engineers, integrated signal integrity and power integrity analysis, and manufacturing preparation and DFM/DFA validation tools.



Guide customers through real design challenges at the board level — controlled impedance stackup design for DDR4/DDR5 and PCIe Gen3/Gen4/Gen5, differential pair routing and length matching, power delivery network optimization, via stub management and back -drilling decisions for high -frequency designs, rigid -flex definition, and design rule configuration for IPC Class 2 and Class 3 reliability requirements.



Run SI/PI analysis workflows end to end — stackup definition, IBIS model setup, pre -layout impedance planning, post -layout simulation for reflections, crosstalk, and insertion loss, PDN impedance analysis, decoupling optimization, and eye diagram generation. Correlate simulation results with lab measurements to build customer confidence in the analysis flow.



Support manufacturing preparation workflows — DFM analysis covering solder joint reliability, copper balance, drill aspect ratios, and annular ring checks. DFA validation for component placement, solder paste volume, and assembly process compatibility. Test point analysis for ICT/FCT accessibility. Panelization review and ODB++/Gerber validation before release to fabrication.






Provide pre -sales and post -sales technical support across the portfolio: tool installation and configuration, library migration from legacy and competing EDA platforms (Altium, Cadence Allegro/OrCAD, KiCad, Eagle), design rule and constraint setup, workflow optimization, and hands -on training for design teams at all levels — from a 2 -person startup moving off a free tool to a 30 -person enterprise team standardizing on a new platform.



Support customers in building enterprise -grade PCB design workflows — centralized library management with version control and role -based access, concurrent team design for large boards, ECAD -MCAD synchronization via incremental design exchange with mechanical CAD environments, and integration with requirements management and PLM systems for compliance -driven design (ISO 26262 hardware, DO -254, ITAR).



Conduct technical training sessions and workshops on PCB design best practices: stackup optimization methodology, high -speed routing strategies and constraint management, SI/PI analysis workflow and interpretation, EMC -aware layout techniques, DFM principles, and the transition path from professional -tier to enterprise -tier tools as team complexity grows.



Collaborate with the sales team on opportunity qualification, technical proposal development, competitive displacement strategies against Altium, Cadence, and free tools, and RFP responses. Provide field intelligence on competitive positioning, customer pain points, workflow gaps, and emerging design challenges.



Contribute to GSAS's technical knowledge base: application notes on SI/PI methodology, stackup design guidelines, DFM checklists, migration guides from competing platforms, design rule templates, and workshop curricula for PCB design teams across skill levels.





Requirements

3–6 years of hands -on experience in PCB design, signal integrity engineering, EDA application engineering, or manufacturing/NPI engineering. You've worked on multi -layer boards with controlled impedance, high -speed interfaces, and real power delivery challenges — not just simple 2 -layer or 4 -layer designs with no speed constraints.



Strong working knowledge of PCB design fundamentals: stackup design and impedance control, differential pair routing, length matching,



via modeling (including stub effects at high frequencies), power plane design and split -plane management, and DFM/DFA constraints. Experience with at least one professional EDA platform — enterprise or mid -tier — for schematic capture and layout.



Hands -on SI/PI analysis experience — not just conceptual understanding. You've set up IBIS models, run impedance simulations, analyzed reflections and crosstalk, interpreted eye diagrams, and worked through PDN impedance analysis with decoupling optimization. You can explain what you're seeing in a simulation result and what to do about it.



Familiarity with high -speed interface standards — DDR3/DDR4/DDR5 routing and timing constraints, PCIe Gen3/Gen4 channel requirements, USB 3.x/4.0, Gigabit Ethernet, LVDS — and the stackup, routing, and termination implications they carry.



Knowledge of manufacturing and assembly processes — Gerber/ODB++ generation and validation, design rule verification, IPC standards (Class 2/Class 3), solder joint reliability, assembly process constraints, and the practical back -and -forth between design engineers and fabricators/assemblers that determines whether a board is actually buildable at yield.



Experience with at least one of GSAS's core verticals — automotive electronics (ADAS, powertrain, body control), aerospace/defense avionics, telecom/networking hardware, medical devices, or industrial control systems. Understanding of compliance frameworks (ISO 26262 for hardware, DO -254, ITAR) as they relate to EDA tool requirements and design data management is a plus.



Strong communication and customer engagement skills across the full range of customer personas — you can troubleshoot a stackup impedance mismatch with a layout engineer, walk a manufacturing team through DFM findings, onboard a startup onto a skilled design tool, and present an enterprise EDA migration strategy to a design director. Willingness to travel for customer engagements, training, and trade shows.



Bachelor's degree in Electronics, Electrical Engineering, or a related discipline.





Benefits

A role that covers the full PCB design chain — from first schematic through manufacturing release — across tools that serve everyone from independent engineers to the world's largest electronics companies. You'll work with hardware teams building the boards that go into vehicles, aircraft, medical devices, telecom infrastructure, and defense systems. A technically rigorous team, competitive compensation, performance -linked incentives, and a growth path into senior application engineering, solutions architecture, or technical leadership.


📌 Field Application Engineer Electronic Systems Design - Bengaluru
🏢 Recognized
📍 Bengaluru

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Freshers & Experience || Full Time || Pediatrician (Ernakulam)

Freshers & Experience || Full Time || Pediatrician (Ernakulam)

17 Oct
|
Spensol
|
Ernakulam
  • 17 Oct
  • Spensol
  • Ernakulam

As a Pediatrician in Ernakulam, India, you will be responsible for providing medical care to infants, children, and adolescents. Your primary duties will include diagnosing and treating various illnes [...]

Holiday Consultant (Chennai)

Holiday Consultant (Chennai)

17 Oct
|
Dexter Holidays
|
Chennai
  • 17 Oct
  • Dexter Holidays
  • Chennai

Responsible to manage the operations and sales of inbound/outbound Holidays • Handle online enquiries & materialize through mail and phone calls. • Preparing customized itinerary an [...]

Subscribe to this job alert:

Get the latest job offers by email for: field application engineer electronic systems design - bengaluru / bengaluru

Social Media Manager - Rohini Sector 9 Delhi

Social Media Manager - Rohini Sector 9 Delhi

17 Oct
|
Sensationz Media & Arts
|
Sector 9
  • 17 Oct
  • Sensationz Media & Arts
  • Sector 9

We are looking for a creative and result-oriented Social Media Manager with robust knowledge of social media platforms and AI-powered tools. The candidate will be responsible for managing social media [...]

Freshers & Experience || Full Time || Customer Care Executive (Chennai)

Freshers & Experience || Full Time || Customer Care Executive (Chennai)

17 Oct
|
Best Management services
|
Chennai
  • 17 Oct
  • Best Management services
  • Chennai

This role offers an excellent opportunity for freshers in customer support for candidates fluent in Telugu, Malayalam, or Kannada, located in Chennai. You will engage with customers, helping them with [...]

Subscribe to this job alert:

Get the latest job offers by email for: field application engineer electronic systems design - bengaluru / bengaluru