:

Hardware Quality

- Audit and approve PCB fabricators (IPC-6012 Class 3), EMS and harness suppliers. Do first-article and source inspection and follow SCARs through to closure.
- Help set up our in-house PCB assembly and harness line, including workmanship standards, inspection stages, ESD areas (ANSI/ESD S20.20), process qualification and operator certification.
- Qualify PCB assemblies, harnesses, conformal coating and avionics boxes as per

IPC-A-610 Class 3, J-STD-001 (space addendum) and IPC/WHMA-A-620.

- Support EEE parts selection and screening, guard against counterfeit parts

(AS6081 / AS5553), and keep lot and date-code traceability for every board.

- Review acceptance and qualification test procedures and witness environmental

(MIL-STD-810) and EMI/EMC (MIL-STD-461) tests.

- Support Test Readiness Reviews.

Software and Firmware V&V;

- Review software requirements, test plans and test cases, and ensure traceability.
- Plan, witness and run HILS and SILS tests, including fault-injection and off-

nominal cases.

- Check unit and integration test results, static analysis and code coverage reports,

and raise NCs where necessary.

- Track software problem reports through to closure and verify fixes before release.
- Help build software quality processes in line with DO-178C, DO-254 and NPR

7150.2.

Root Cause and AS9100D

- Lead failure investigations on avionics hardware and software, such as solder defects, intermittent faults, component failures and software anomalies. Ensure failures are seen through to closure.
- Maintain avionics configuration and as-built records and support the QMS work and internal audits for AS9100D.

Desired Profile / Criteria / Skills :

REQUIRED QUALIFICATION

- Diploma, B.E./B.Tech or Master in Electronics, Electrical, Instrumentation or

Computer Engineering.

- Diploma with 4–7 years, B.E./B.Tech with 3–5 years, or Masters with 2–4 years in avionics or electronics quality,



in aerospace, defense, space or other high-

reliability industries.

- Strong working knowledge of IPC-A-610, J-STD-001 and IPC/WHMA-A-620

workmanship standards.

- Hands-on experience testing embedded software or firmware, including requirements traceability, test case reviews and HILS/SILS testing.
- Understands software configuration management and how problem reports are tracked and closed.
- Able to read schematics, BOMs, assembly drawings and test procedures.

Comfortable with inspection microscopes, multimeters and oscilloscopes, and can read X-ray and cross-section reports.

- Solid RCA skills on both electronics’ hardware and software issues.
- Has worked with and audited electronics suppliers.
- Good documentation skills, and the confidence to stop hardware or software release when the evidence is not complete.
- Willingness to obtain IPC certification after joining.
- Able to read engineering drawings and understand GD&T; requirements in line with ASME Y14.5. Should also be able to prepare an inspection plan from a drawing.
- Hand-on experience with Vernier Calipers, Micrometers, Height Gauge, Bore

Gauge, Thread and Pin Gauge & Surface Roughness testers. Exposure to CMM inspection.

- Working knowledge of AS9100D requirements and the ability to learn and follow new quality processes as they are introduced.
- Able to hold or reject parts that do not meet requirements and discuss quality issues clearly with suppliers and internal teams.

PREFERRED QUALIFICATION

- IPC CIS or CIT certification in IPC-A-610, J-STD-001 or IPC/WHMA-A-620.
- Has worked with DO-178C, DO-254 or NPR 7150.2 processes.
- Has used static analysis, code coverage or test automation tools for embedded software.
- Has set up an in-house PCB assembly or harness line
- Knows MIL-STD-883, NASA-STD-8739 workmanship standards or EEE parts screening.
- Has worked on avionics with ISRO, DRDO, HAL or their suppliers.
- Has worked in an AS9100-certified company.

📌 Quality Engineer (Avionics) based at Hebbal , Bangalore (Bengaluru)
🏢 Talent Leads Consultants
📍 Bengaluru