Job highlights

- Experience with IPC-A-610 Class 3, J-STD-001, IPC/WHMA-A-620 inspections and AS9102 FAI

- Inspect PCBs, components, cable harnesses, perform in-process and final inspections, witness tests, handle NCRs and audits

Role & responsibilities

- Inspect incoming material: bare PCBs, electronic components, connectors, cables and harness sub-parts, against drawings, datasheets and purchase specs.

Check

CoCs, date codes and lot traceability.

- Do in-process and final inspection of PCB assemblies, covering SMT/THT solder joints, component placement and polarity, conformal coating, cleanliness and workmanship, to IPC-A-610 (Class 3) and J-STD-001.

- Inspect cable and wire harnesses to IPC/WHMA-A-620: crimp quality, pull tests, routing, lacing, marking, backshells and sleeving. Witness continuity, insulation resistance (IR) and hi-pot tests.





- Review and witness board-level and functional tests (ICT/FCT) and ESS such as burn-in and thermal cycling, and record results.

- Carry out First Article Inspection (FAI) to AS9102 for recent or changed parts.

- Check ESD controls (ANSI/ESD S20.20), MSL handling and baking, and shelf-life/storage compliance on the shop floor.

- Raise and close NCRs, lead MRB dispositions, and drive root cause and corrective action (8D, 5-Why, Ishikawa).

- Take part in supplier and sub-contractor inspections and audits for EMS and harness vendors.

- Prepare inspection reports, travellers and quality records, and support customer and DGAQA/QA-agency inspections.

Watch for counterfeit and obsolete parts per AS5553-type practice

📌 Lead Engineer QC- Electronics (Thiruvananthapuram)
🏢 TUV India
📍 Thiruvananthapuram