Roles and Responsibilities:

E/E Platform Design & Development: . Logical and Physical Architecture Development . System Requirement Specification Development . Automotive body domain functions design & development . ISO 26262 ASIL compliance for all safety related body-domain functions . Understanding of functions like Gateway, OTA, Digital Key etc. . Functional safety and Cybersecurity adaptation . Know-how of different types of E/E Platform (Distributed, Domain, Zone etc. .Vehicle Network Architecture Optimization using CAN, CAN-FD, LIN, and Ethernet .System Resource Optimization including ECU Consolidation, Network Load, Power Consumption, and Wiring Harness Complexity .Definition and Management of System Interfaces between Vehicle Domains and ECUs

Hardware Design & Development: . Hardware Interface Circuit (Vehicle side) and create requirement for ECU side I/F. . FMEA (System FMEA, Connector FMEA, Design FMEA) & DRBFM . Understanding of Design Guidelines & Standards for 2D & 3D making. . Knowledge of design software such as Unigraphics & Teamcenter. . Knowledge of BOM management and Sourcing systems: Online Ringi, E-DAS, IBOM, ENOVIA, SAP Ariba, MS Office/Outlook etc

Testing: . Verification & Testing in the Vehicle . Prepare vehicle test checklist and test report. . Hardware Issue debugging . Reliability test specification, EMI/EMC test specification and standards (ISO/JASO/CISPR etc.) . Compare and corelate the reliability test specification (request) vs actual part level reliability test report

Technical/ Functional: Requirement Development and Management: . System Requirement Specification Development and Management . Vehicle Benchmarking Hardware Development: . Part and Model development lifecycle .



Valuable understanding of Body Control domain and features

Vehicle-level functional analysis and allocation to ECUs and networks.

E/E system architecture development for Body Control, Gateway, OTA, Digital Key, Lighting, and Comfort functions.

System behaviour analysis, interface analysis, and signal-flow analysis.

Architecture evaluation considering reliability, safety, cybersecurity, diagnostics, and software update requirements.

Optimization of E/E architecture for cost, weight, wiring complexity, network bandwidth, and scalability.

Network topology analysis and communication load assessment for CAN, CAN-FD, LIN, and Ethernet systems.

Vehicle benchmarking and competitor architecture analysis.

Root cause analysis and system-level issue resolution during development and validation phases.

Support migration from Distributed Architecture to Domain-based and Zonal Architecture concepts.

Verification & Validation: . Hardware verification on Vehicle . Regulatory development testing Diagnostics & Communication Protocols: . CAN, CAN-FD, LIN, Ethernet Communication protocol . Diagnostic communication protocols e.g., KWP2000, UDS

Hardware: . Micro-controller/Micro-processor architecture . Micro-controller hardware I/O configuration . Knowledge of multi-core platforms and Hypervisor, ICs, FPGA etc. and electronics child part selection along with technology partners.

Tools: . Usage of various testing tools/equipment (CRO, Multimeter, Voltage/Current probe etc.) . ECU testing, excellent electrical/electronic troubleshooting skills . Analysis tools Vector CANoe, CANalyzer

Standards: . Working knowledge of AUTOSAR, ISO-26262 standards, Cyber Security and Software Update standards . Working knowledge of UNECE regulation and AIS standards in Body Electrical domain

📌 EE Platform Architecture and System (Gurugram)
🏢 Maruti Suzuki
📍 Gurugram