: Safety Officer (PEB Site)

Department: EHS / Safety

Location: All India

Reports to: Site Head / Project Manager

Employment type: Full-time

Job Purpose To ensure a safe working environment at the PEB site by implementing safety systems, ensuring legal and statutory compliance, and driving a zero-accident culture across fabrication, erection and site activities.

Key Responsibilities

Compliance and documentation

- Ensure compliance with all applicable legal and statutory safety requirements (Factories Act, BOCW Act and Rules, and other applicable state and central regulations).
- Maintain all safety records, registers, permits, licences and statutory documentation, and keep them audit-ready.
- Ensure work permits are issued and followed for hot work, work at height, confined space, electrical and lifting activities.

Audits and corrective actions

- Conduct periodic safety audits and site inspections.
- Identify hazards and unsafe acts or conditions, and recommend and track corrective and preventive actions to closure.
- Carry out risk assessments and prepare JSA/HIRA for site activities.

PPE and site safety measures

- Ensure all workers, staff and visitors use appropriate PPE (helmets, safety shoes, harnesses, gloves, eye protection, etc.).
- Check safety systems daily, including scaffolding, lifelines and fall protection, cranes and lifting tackles, electrical safety, fire safety and housekeeping.

Accident prevention





- Drive the zero-accident objective through daily monitoring and toolbox talks.
- Investigate incidents, near misses and accidents, find root causes and implement preventive measures.

Training and awareness

- Train employees, contractors and workers on safe work practices and emergency procedures.
- Conduct induction programs for new joiners and periodic refresher training.
- Run safety campaigns and awareness programs.

Reporting

- Prepare and submit safety MIS reports to management (incidents, near misses, audit findings, training records, compliance status, and corrective action status).

Qualifications and Experience
- Diploma or degree in Engineering, with a recognised Diploma/PG Diploma in Industrial Safety (e.g., NEBOSH, IOSH, or a state-recognised safety officer qualification).
- 3 to 8 years of experience as a safety officer in PEB, steel structure, construction or heavy fabrication sites.
- Experience with erection, working at height and crane/lifting operations is preferred.

Skills and Competencies
- Sound knowledge of safety laws, standards and statutory requirements.
- Experience in safety audits, risk assessment (HIRA/JSA) and incident investigation.
- Positive communication and training skills.
- MIS reporting and documentation skills (MS Office/Excel).
- Firm and proactive approach to enforcing safety discipline.

📌 Safety Officer( Mechanical Engineer) (Pune)
🏢 APL Apollo Tubes
📍 Pune