You will lead the engineering development integration testing and commissioning of advanced Data Center PMS/ECMS solutions for AI-ready mission-critical facilities with onsite generation and complex electrical distribution systems.
- Review customer specifications SLDs protection schemes AI workload profiles generator operating philosophy and power management requirements.
- Design PMS/ECMS architectures DCS control strategies network topologies and system integration approaches for high-density data center electrical infrastructure.
- Develop configure and tune Ovation DCS databases control logic graphics alarms trends displays and operator interfaces for PMS applications.
- Engineer advanced load management functions including AI peak demand control priority-based load shedding load restoration load sharing islanding black start bus transfer and demand management.
- Develop complex load bus management schemes for multiple electrical buses generators transformers switchgear lineups UPS/BESS interfaces and critical/non-critical load groups.
- Engineer and validate multi-generator synchronization load sharing generator sequencing spinning reserve logic and transitions between grid-connected islanded and backup operating modes.
- Integrate generators switchgear substations transformers protective relays RTACs meters UPS BESS renewable energy systems and utility/grid interfaces.
- Configure and troubleshoot IEC 61850 Modbus OPC UA DNP3 and related communication protocols used for power system automation and electrical asset integration.
- Prepare engineering deliverables including PMS philosophy FDS logic narratives cause-and-effect matrices I/O lists communication documents simulation plans and test procedures.
- Execute simulation FAT SAT system integration commissioning startup performance tuning and customer acceptance testing for PMS/ECMS systems.
- Lead system power-up redundancy testing communication verification functional testing failure-mode testing and validation of electrical operating scenarios.
- Coordinate with customers consultants vendors project teams and subcontractors while ensuring compliance with project requirements quality standards industry codes and mission-critical uptime expectations.
Who You Are:
You should be able to assume responsibility for the outcomes of others.Promotes a sense of urgency and establishes and enforces individual accountability in the team.You should be able to deliver messages in a clear compelling and concise manner. Actively listens and checks for aggressive goals and has high standards. You should be consistently one of the top performers.
Pursues everything with energy drive and the need to finish as per business needs.
For This Role You Will Need:
- Bachelors or Masters degree in Electrical Engineering Power Systems Instrumentation & Control or a related engineering discipline.
- Five (5) to Twelve (12) years of experience in PMS ECMS EMS DCS SCADA microgrid or power system automation projects.
- Strong understanding of data center electrical infrastructure AI/high-density load behavior onsite power generation UPS/BESS systems and grid-connected or islanded operating modes.
- Hands-on experience developing configuring testing and tuning DCS-based PMS or load management applications.
- Knowledge of demand control priority-based load shedding load restoration load sharing bus load management generator sequencing and spinning reserve logic.
- Experience with synchronization of multiple generators and operation of electrical systems across grid-connected islanded standby and black-start scenarios.
- Strong knowledge of electrical power generation distribution protection metering switchgear transformers substations and control systems.
- Ability to interpret SLDs protection drawings control schematics communication architectures I/O lists and cause-and-effect requirements.
- Working knowledge of industrial communication protocols such as IEC 61850 Modbus OPC UA DNP3 and related automation networks.
- Hands-on experience in simulation FAT SAT commissioning startup troubleshooting and performance tuning for mission-critical power control systems.
- Solid analytical troubleshooting communication and customer-facing skills with the ability to lead technical discussions and resolve complex site issues.
- Willingness to travel for project execution commissioning customer acceptance testing and site support.
Preferred Qualifications that Set You Apart:
- Deep experience with Data Center PMS/ECMS microgrid hybrid EMS and DCS/SCADA solutions for mission-critical or high-availability facilities.
- Practical understanding of AI data center power behavior including fast load ramps high-density compute loads power quality impacts and coordination between utility supply onsite generation UPS BESS and critical load blocks.
- Proven expertise in developing and tuning advanced load management applications including AI peak demand control priority-based load shedding load restoration bus load management power sharing and islanding logic.
- Hands-on experience with multi-generator synchronization generator sequencing spinning reserve black start load sharing and transitions between grid-connected islanded and backup power modes.
- Experience with Emerson Ovation SEL RTAC protective relay integration IEC 61850 engineering and equivalent IED/substation automation architectures.
- Strong knowledge of AIS/GIS substations switchyards medium-voltage and low-voltage switchgear generator controls AVRs synchronization systems and utility/grid interconnection requirements.
- Experience integrating UPS BESS renewable sources backup generation fuel systems meters protection relays and electrical monitoring devices into centralized PMS/ECMS platforms.
- Working knowledge of IEEE IEC NEC NFPA data center reliability practices utility grid codes and mission-critical electrical safety requirements.
- Knowledge of industrial cybersecurity principles for DCS SCADA substation automation and mission-critical power control systems.
- Experience leading simulation digital testing integrated FAT SAT commissioning performance tuning and customer acceptance testing for complex PMS/ECMS projects.
- Ability to develop software design documentation control narratives test scripts failure-mode scenarios and validation plans for load management and generator control functions.
- Familiarity with programming or scripting languages such as C C Python or structured control logic used in automation and power management applications.
Our Culture & Commitment to You:
At Emerson we prioritize a workplace where every employee is valued respected and empowered to grow. We foster an environment that encourages innovation collaboration and diverse perspectives because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship training or leadership opportunities we invest in your success so you can make a lasting impact. We believe diverse teams working together are key to driving growth and delivering business results.
We recognize the importance of employee wellbeing. We prioritize providing competitive benefits plans a variety of medical insurance plans Employee Assistance Program employee resource groups recognition and much more. Our culture offers flexible time off plans including paid parental leave (maternal and paternal) vacation and holiday leave.
Required Experience:
Senior IC
📌 Data Center PMS Project Technical Lead (Noida)
🏢 Emerson
📍 Noida
Reply to this offer
Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.