16 Nov
|
Sumukh Steel Castings
|
Kolhapur
16 Nov
Sumukh Steel Castings
Kolhapur
2. Key Responsibilities
A. Raw Material & Charge Management
1. Inspect and verify incoming raw materials such as scrap, pig iron, ferro alloys and other charge materials.
2. Ensure proper identification, segregation and storage of raw materials.
3. Verify material grades and chemical composition as per specifications.
4. Prepare charge calculations based on required steel grades.
5. Maintain raw material inspection and consumption records.
B. Melting & Furnace Operations
1. Monitor melting operations and ensure proper furnace practices.
2. Prepare and verify charge mix calculations.
3. Monitor furnace temperature and melting parameters.
4. Control addition of ferro alloys and other alloying elements.
5. Ensure proper deoxidation and refining practices.
6. Monitor chemical composition through spectrometer analysis.
7. Guide the melting team to achieve the required steel grade and quality.
C. Chemical & Metallurgical Testing
1. Conduct chemical composition analysis using a spectrometer.
2. Verify test results against customer specifications.
3. Conduct and coordinate mechanical testing such as:
o Tensile Test o Hardness Test o Impact Test o Elongation Test
1. Coordinate metallographic examination and microstructure analysis.
2. Maintain heat-wise and batch-wise testing records.
3. Ensure calibration and verification of testing equipment.
D. Heat Treatment Process
1. Prepare and monitor heat treatment cycles as per customer requirements.
2. Monitor heating temperature, soaking time and cooling conditions.
3. Ensure proper heat treatment practices for different steel grades.
4. Verify hardness and mechanical properties after heat treatment.
5.
Maintain heat treatment charts and process records.
6. Investigate metallurgical failures and heat treatment-related defects.
E. Foundry Process Control Monitor and support metallurgical quality throughout the following processes:
· Pattern Shop
· Moulding & Core Shop
· Sand Preparation
· Melting & Furnace Operations
· Pouring and Solidification
· Cooling and Shakeout
· Fettling and Grinding
· Heat Treatment
· Shot Blasting
· Machining
· Final Inspection
F. Defect Analysis & Problem Solving
1. Identify and analyse casting defects such as:
o Shrinkage o Porosity o Blowholes o Hot Tears / Cracks o Inclusions o Misrun and Cold Shut
1. Conduct root cause analysis of metallurgical and casting defects.
2. Recommend corrective actions to reduce rejection and rework.
3. Coordinate with Production and Quality departments for defect prevention.
4. Implement process improvements to improve casting quality.
G. Documentation & Quality Management
1. Maintain heat-wise chemical composition reports.
2. Prepare and maintain metallurgical test reports.
3. Maintain furnace and heat treatment records.
4. Prepare material test certificates (MTC) as required.
5. Maintain calibration and testing equipment records.
6. Support ISO 9001:2015 and IATF 16949 documentation and audits.
7. Ensure traceability of raw materials,
heats and finished castings.
H. Customer & Technical Support
1. Review customer specifications and material requirements.
2. Support NPD activities for current steel casting grades.
3. Coordinate with customers regarding metallurgical requirements.
4. Provide technical support for customer complaints.
5. Ensure compliance with applicable material standards and specifications.
3. Required Qualifications · BE / B.Tech in Metallurgical Engineering preferred.
· Diploma in Metallurgy / Mechanical Engineering with relevant foundry experience may be considered.
· Knowledge of steel metallurgy and foundry technology.
4. Experience
· 3–5 years of experience in steel casting / foundry industry.
· Practical experience in induction furnace operations.
· Experience in spectrometer operation and chemical analysis.
· Knowledge of heat treatment and metallurgical testing.
· Experience in casting defect analysis and process improvement.
5. Required Skills & Competencies
· Knowledge of steel grades and chemical composition.
· Charge mix calculation and alloy addition.
· Spectrometer operation and result interpretation.
· Knowledge of heat treatment processes.
· Casting defect identification and analysis.
· Knowledge of mechanical and metallurgical testing.
· Root Cause Analysis and problem-solving skills.
· ISO 9001:2015 and IATF 16949 awareness.
· Documentation and reporting skills.
· Coordination and teamwork.
Pay: ₹25,000.00 - ₹35,000.00 per month
Benefits
- Cell phone reimbursement
- Health insurance
- Paid sick time
- Provident Fund
Work Location: In person
📌 Metallurgist (Kolhapur)
🏢 Sumukh Steel Castings
📍 Kolhapur