17 Nov
|
FTD Innovations
|
Surat
17 Nov
FTD Innovations
Surat
About the role
FTD Innovations builds UAV/drone platforms, flight controllers and FPV drone components. We are looking for an engineer with hands-on robotics and UAV experience to build, integrate and flight-test our drone systems. Responsibilities
• Assemble and integrate multirotor and fixed-wing UAV systems: airframes, propulsion, ESCs, flight controllers, GPS/GNSS, telemetry and RC links (ELRS).
• Flash, configure and tune flight controller firmware (ArduPilot/PX4-class stacks) for secure flight.
• Plan and run ground tests and flight tests; analyze flight logs and iterate on tuning and hardware.
• Work with the electronics team on flight-controller hardware, sensors, wiring and power systems.
• Document builds, test procedures and flight-test results.
• Support field trials and demonstrations. Requirements
• Minimum 1-2 years of hands-on experience across both robotics and UAV/drone systems.
• Experience building and flying multirotor or fixed-wing UAVs.
• Working knowledge of ArduPilot or PX4 setup, calibration and flight-log analysis.
• Robotics
experience:
sensors, actuators, and robot software such as ROS.
• Familiarity with ELRS/RC links, telemetry, GPS/GNSS and FPV systems.
• Basic electronics
skills:
wiring, soldering, power distribution and multimeter use.
• Willing to work on-site in Surat and travel for field tests. Good to have
• Embedded C/C++ or firmware development experience.
• Experience with companion computers (Raspberry Pi, Jetson).
• Familiarity with DGCA drone regulations; drone pilot certification is a plus.
• CAD basics for mounts and brackets.
📌 Robotics / UAV Engineer (Surat)
🏢 FTD Innovations
📍 Surat