Safety Officer (Doddaballapura)

Safety Officer (Doddaballapura)

17 Nov
|
Legion Energy Bengaluru
|
Doddaballapura

17 Nov

Legion Energy Bengaluru

Doddaballapura

Roles & Responsibilities

A. Workplace Safety & Risk Management

1. Conduct regular safety inspections across production, maintenance, stores, utilities and other operational areas.
2. Identify unsafe acts, unsafe conditions and potential workplace hazards.
3. Conduct Job Safety Analysis (JSA) and risk assessments for critical activities.
4. Recommend and implement corrective and preventive actions to eliminate workplace hazards.
5. Ensure compliance with safety procedures, work instructions and PPE requirements.
6. Monitor machine guarding, electrical safety, material handling and workplace ergonomics.
7. Ensure proper housekeeping and maintain safe access and emergency evacuation routes.

B. Statutory Compliance & Documentation

1. Ensure compliance with applicable provisions of the Factories Act, Karnataka Factories Rules and relevant occupational safety regulations.
2. Maintain statutory safety records, registers, inspection reports and incident documentation.
3. Coordinate with factory inspectors and other statutory authorities during inspections.
4. Ensure timely renewal and compliance of applicable safety-related licences and certificates.
5. Monitor compliance with applicable environmental, fire safety and occupational health requirements.
6. Maintain records of safety audits, risk assessments, training and corrective actions.

C. Accident & Incident Management

1. Investigate workplace accidents, near misses, unsafe acts and occupational injuries.
2. Identify root causes and recommend corrective and preventive actions.
3. Prepare incident investigation reports and submit them to management.
4. Monitor the implementation and effectiveness of corrective actions.
5. Maintain accident statistics and analyse trends to prevent recurrence.
6. Ensure timely reporting of reportable accidents to the concerned authorities, as applicable.

D. Fire & Emergency Management

1. Ensure the availability and operational readiness of fire extinguishers, hydrants, alarms and other firefighting equipment.
2. Conduct periodic inspections of emergency exits, fire exits and evacuation routes.
3. Organise fire safety training, mock drills and emergency response exercises.
4. Ensure employees are aware of emergency response procedures and assembly points.
5. Coordinate with emergency response teams during fire, chemical leakage,



electrical accidents and other emergencies.
6. Ensure emergency equipment is inspected and maintained as per applicable requirements.

E. Employee Safety Training & Awareness

1. Conduct safety induction programmes for new employees, contract workers and visitors.
2. Organise regular toolbox talks and safety awareness programmes.
3. Train employees on PPE usage, machine safety, electrical safety, material handling and emergency procedures.
4. Create awareness about workplace hazards and accident prevention.
5. Conduct specialised safety training for employees involved in high-risk activities.
6. Promote employee participation in safety committees and safety improvement initiatives.

F. Personal Protective Equipment (PPE) Management

1. Identify PPE requirements based on departmental and job-specific risk assessments.
2. Ensure the availability and proper distribution of safety shoes, helmets, gloves, goggles, earplugs, masks and other required PPE.
3. Monitor proper usage of PPE across all manufacturing areas.
4. Conduct periodic inspections of PPE condition and ensure timely replacement.
5. Maintain PPE issue records and monitor compliance.

G. Machine & Equipment Safety

1. Ensure machines and equipment are operated with adequate safety guards and protective devices.
2. Monitor compliance with Lockout/Tagout (LOTO) procedures during maintenance activities.
3. Ensure safe operating procedures are available for critical machinery.
4. Inspect lifting equipment, cranes, hoists, forklifts and other material-handling equipment.
5. Monitor compliance with preventive maintenance and safety inspection schedules.
6. Ensure appropriate safety precautions are followed during machine installation, commissioning and modification.

H. Permit to Work (PTW) & High-Risk Activities

1. Monitor and ensure implementation of the Permit to Work system.
2. Verify safety precautions before commencement of hot work,



work at height, confined space entry and electrical maintenance.
3. Ensure proper isolation of electrical and mechanical equipment before maintenance.
4. Monitor contractor safety compliance during installation, construction and maintenance activities.
5. Ensure availability of appropriate PPE, fire protection and emergency arrangements before high-risk activities.

I. Occupational Health & Industrial Hygiene

1. Monitor workplace conditions such as noise, lighting, ventilation, dust and temperature.
2. Coordinate periodic health check-ups and medical examinations for employees as applicable.
3. Identify potential occupational health hazards and recommend preventive measures.
4. Ensure safe storage, handling and disposal of chemicals and hazardous materials.
5. Maintain Safety Data Sheets (SDS/MSDS) for chemicals used in the manufacturing facility.
6. Monitor drinking water, sanitation and workplace hygiene conditions in coordination with the concerned departments.

J. Contractor & Visitor Safety

1. Ensure safety induction for contractors, outsourced manpower and visitors.
2. Verify contractor compliance with applicable safety requirements.
3. Monitor PPE compliance and safe working practices of contract employees.
4. Conduct periodic contractor safety inspections.
5. Ensure contractors follow PTW and other established safety procedures.

K. Safety Audits & Continuous Improvement

1. Conduct daily, weekly and monthly safety inspections.
2. Coordinate internal and external safety audits.
3. Prepare safety audit reports and monitor closure of observations.
4. Identify opportunities to improve workplace safety standards.
5. Implement 5S and visual safety management practices.
6. Drive safety campaigns, awareness programmes and employee participation initiatives.

L. Environmental Safety

1. Monitor proper segregation, storage and disposal of hazardous and non-hazardous waste.
2. Ensure secure handling of oils, chemicals and other hazardous substances.
3. Monitor spill prevention and emergency response arrangements.
4. Coordinate with the environmental team to ensure compliance with applicable pollution control requirements.
5. Promote resource conservation and environmentally responsible workplace practices.

📌 Safety Officer (Doddaballapura)
🏢 Legion Energy Bengaluru
📍 Doddaballapura

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: safety officer (doddaballapura) / doddaballapura

Subscribe to this job alert:

Get the latest job offers by email for: safety officer (doddaballapura) / doddaballapura