17 Nov
|
FTD Innovations
|
Surat
17 Nov
FTD Innovations
Surat
About the role
FTD Innovations builds UAV/drone platforms, flight controllers and FPV drone components. We are looking for an engineer with hands-on robotics and UAV experience to build, integrate and flight-test our drone systems.
Responsibilities
- Assemble and integrate multirotor and fixed-wing UAV systems: airframes, propulsion, ESCs, flight controllers, GPS/GNSS, telemetry and RC links (ELRS).
- Flash, configure and tune flight controller firmware (ArduPilot/PX4-class stacks) for stable flight.
- Plan and run ground tests and flight tests; analyze flight logs and iterate on tuning and hardware.
- Work with the electronics team on flight-controller hardware, sensors, wiring and power systems.
- Document builds, test procedures and flight-test results.
- Support field trials and demonstrations.
Requirements
- Minimum 1-2 years of hands-on experience across both robotics and UAV/drone systems.
- Experience building and flying multirotor or fixed-wing UAVs.
- Working knowledge of ArduPilot or PX4 setup, calibration and flight-log analysis.
- Robotics experience: sensors, actuators, and robot software such as ROS.
- Familiarity with ELRS/RC links, telemetry, GPS/GNSS and FPV systems.
- Basic electronics skills: wiring, soldering, power distribution and multimeter use.
- Willing to work in office in Surat and travel for field tests.
Good to have
- Embedded C/C++ or firmware development experience.
- Experience with companion computers (Raspberry Pi, Jetson).
- Familiarity with DGCA drone regulations; drone pilot certification is a plus.
- CAD basics for mounts and brackets.
📌 Robotics / UAV Engineer (Surat)
🏢 FTD Innovations
📍 Surat