Electrical Engineer (Gandhidham)

Electrical Engineer (Gandhidham)

17 Nov
|
Gipskarton
|
Gandhidham

17 Nov

Gipskarton

Gandhidham

GREENLOOP SOLUTIONS PRIVATE LIMITED

ELECTRICAL ENGINEER TIRE RECYCLING PLANT

CompanyGreenLoop Solutions Private LimitedDepartmentPlant Operations & MaintenanceDesignationElectrical EngineerLocationKutch, GujaratReporting ToPlant ManagerExperience37 YearsQualificationDiploma / B.E. / B.Tech in Electrical Engineering

1. Job Objective To ensure protected, reliable and uninterrupted electrical and automation operation of the existing Tire Shredding, Tire Pyrolysis and Recovered Carbon Black (rCB) processing units. The Electrical Engineer will be responsible for day-to-day monitoring, preventive and breakdown maintenance, troubleshooting of electrical and control systems, coordination with production teams and minimizing electrical downtime to support achievement of plant production targets.
2. Key Responsibilities A.

Tire Shredding

Unit

- Monitor electrical systems of primary and secondary shredders, motors, drives and control panels.
- Maintain and troubleshoot motors, VFDs, starters, MCC panels, control wiring and field instruments.
- Monitor motor current, voltage, temperature, loading and abnormal tripping during operation.
- Troubleshoot electrical faults in conveyors, magnetic separators, hydraulic power packs and material handling equipment.
- Check motor protection settings, overload relays, contactors, sensors, limit switches and emergency stop circuits.
- Support operations in identifying electrical causes of low output, repeated trips and machine stoppages.

B.

Tire Pyrolysis

Unit

- Ensure reliable operation of electrical and automation systems associated with the pyrolysis plant.
- Monitor and troubleshoot reactor drive motors, feeding and discharge conveyors, pumps, blowers and cooling systems.
- Maintain PLC panels, HMI systems, VFDs, control panels, sensors, transmitters and electrical interlocks.
- Check temperature, pressure, level and other process instrumentation for correct signal, indication and response.
- Troubleshoot burner control circuits, ignition systems, solenoid valves and associated electrical interfaces in coordination with authorized operations and burner specialists.
- Investigate repeated motor trips, VFD faults, signal failures, communication errors and control system alarms.
- Verify functioning of emergency stops, permissive logic, alarms and safety interlocks; do not bypass safety devices without formal authorization.
- Coordinate with OEM / supplier engineers for PLC, VFD, instrumentation and control-system issues.

C.

Recovered Carbon

Black (rCB) Unit

- Maintain electrical systems of grinding mills, pulverizers, classifiers, pelletizers and mixers.
- Monitor motors, VFDs, feeders, blowers, bucket elevators, conveyors and dust collection equipment.
- Troubleshoot electrical faults affecting grinding, powder transfer and pelletizing operations.
- Inspect sensors, limit switches, load cells and other instruments used in material handling and process control.
- Monitor electrical loading and identify opportunities to improve energy efficiency and equipment performance.

1. Electrical Maintenance &

• Reliability

- Prepare and implement daily, weekly and monthly preventive electrical maintenance schedules.
- Conduct routine inspection of motors, panels, cables, busbars,



earthing and electrical accessories.
- Check panel ventilation, cleanliness, terminal tightness, cable condition and signs of overheating.
- Use appropriate testing instruments to check insulation resistance, continuity, voltage, current and earthing as applicable.
- Maintain records of electrical breakdowns, trip history, recurring faults and corrective actions.
- Conduct root cause analysis and implement permanent solutions for recurring electrical failures.
- Maintain critical electrical spares such as sensors, relays, contactors, fuses, VFD components and control devices.
- Coordinate with external service providers for specialist repairs and testing.

1. PLC, Automation &

• Instrumentation

- Monitor the health and availability of PLC, HMI, VFD and control-panel systems.
- Troubleshoot field signal issues, sensor faults, instrument wiring and communication problems.
- Understand electrical drawings, control schematics, I/O lists, wiring diagrams and equipment manuals.
- Support authorized PLC / HMI logic checks and parameter backups; changes to control logic must follow approval and change-control procedures.
- Verify calibration status and functional response of critical process instruments in coordination with the relevant team.
- Maintain backups and records of approved PLC, HMI and VFD parameters wherever access and OEM procedures permit.

1. Production &

• Operational Support

- Work closely with the Production / Operations Manager to support daily production targets.
- Attend electrical breakdowns promptly and restore equipment safely.
- Monitor electrical performance during production trials and routine operations.
- Coordinate with mechanical and operations teams to identify the root cause of machine stoppages.
- Review energy consumption and equipment loading; recommend practical energy-saving measures.
- Provide shift-wise handover of pending electrical issues and equipment condition.

1. Electrical Safety &

• Statutory Compliance

- Ensure compliance with applicable electrical safety rules, approved site procedures and permit-to-work requirements.
- Follow Lockout / Tagout (LOTO), isolation, testing and safe re-energization procedures.
- Ensure proper earthing, equipment protection, cable routing, panel access and electrical enclosures.
- Inspect emergency stops, electrical interlocks and protective devices at defined intervals.
- Ensure only authorized and competent personnel perform electrical work.
- Maintain safe working practices in hazardous or classified areas and follow the plant's area-specific electrical requirements.
- Report unsafe conditions, near misses and electrical incidents immediately.

1. Manpower &

• Contractor Coordination

- Supervise electricians, electrical technicians and external electrical contractors.
- Allocate daily maintenance work and monitor completion and quality.




- Ensure technicians follow approved maintenance procedures and safety requirements.
- Guide the team in fault finding, testing and preventive maintenance practices.
- Coordinate with OEM representatives for technical support and resolution of recurring defects.

1. Spare Parts &

• Cost Control

- Identify critical electrical spares and maintain minimum stock levels.
- Prepare technical specifications and material requisitions for electrical spares.
- Coordinate with procurement for timely purchase of approved materials.
- Track spare consumption, repair costs and repeat replacement trends.
- Recommend repair or replacement based on safety, reliability and lifecycle cost.

1. Reporting &

• Documentation

- Prepare daily electrical maintenance and breakdown reports.
- Maintain preventive maintenance checklists and equipment-wise maintenance history.
- Record electrical downtime, trip reasons, corrective actions and pending jobs.
- Maintain updated electrical drawings, panel schedules, cable details and instrument records where available.
- Submit monthly reports covering equipment reliability, recurring issues, energy consumption observations and maintenance activities.

1. Required Technical Skills

- Practical experience with industrial motors, VFDs, MCCs, PCCs, control panels and electrical distribution systems.
- Working knowledge of PLC, HMI, instrumentation and industrial control systems.
- Ability to read electrical single-line diagrams, wiring diagrams and control schematics.
- Knowledge of motor protection, earthing, cable sizing and electrical testing practices.
- Hands-on troubleshooting skills for industrial machinery and continuous-process plants.
- Familiarity with electrical safety, LOTO and permit-to-work systems.
- Basic MS Excel and maintenance reporting skills.

1. Educational Qualification &

• Experience

- Diploma / B.E. / B.Tech in Electrical Engineering.
- 37 years of relevant industrial electrical maintenance experience.
- Experience in tire recycling, pyrolysis, cement, steel, chemical, process or heavy engineering industries will be preferred.
- Practical experience with PLC / VFD-based machinery and plant operations will be an advantage.

1. Key Performance Indicators (KPIs)

- Electrical equipment availability and reliability.
- Reduction in electrical breakdowns and unplanned downtime.
- Timely completion of preventive electrical maintenance.
- Reduction in repeated motor, VFD, panel and instrumentation faults.
- Response and restoration time for electrical breakdowns.
- Compliance with electrical safety procedures and statutory requirements.
- Control of electrical spare consumption and maintenance costs.
- Accuracy and timeliness of maintenance records and shift handovers.

1. Overall Responsibility To take ownership of electrical, automation and instrumentation reliability across the Tire Shredding, Tire Pyrolysis and Recovered Carbon Black units. The primary focus is to ensure safe and continuous plant operation, minimize electrical and control-system downtime, resolve recurring faults and support the production team in achieving daily production targets. | Electrical Engineer Tire Recycling Plant Page 1

📌 Electrical Engineer (Gandhidham)
🏢 Gipskarton
📍 Gandhidham

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: electrical engineer (gandhidham) / gandhidham

Subscribe to this job alert:

Get the latest job offers by email for: electrical engineer (gandhidham) / gandhidham