: Senior SI/PI Engineer
Bangalore
Company Description
We are a leading provider of high-performance, ultra-low power IP cores optimized for advanced semiconductor nodes, enabling the development of cutting-edge systems-on-chip (SoCs) for applications such as 5G, AI, LiDAR, radar, networking, and IoT. Known for its cutting-edge small geometry solutions, our expertise encompasses data converter IP cores ranging from 6-bit to 14-bit resolutions and sampling rates up to over 20 Gsps. F
: Senior SI/PI Engineer
Function: Advanced Packaging / Signal Integrity & Power Integrity
Level: Senior / Principal (8+ years of relevant experience)
Location: Bengaluru
About the Role
We are looking for a hands-on SI/PI engineer to own the die-to-die channel and power-delivery design for our next generation of chiplet interconnects. You will take D2D routing (CoWoS technology) from pin-field fanout to a signed-off channel at 64 Gbps per lane, and develop the power delivery network (PDN) for both the 64 Gbps D2D interface and a 448 Gbps SerDes.
Key Responsibilities
1. D2D channel routing and layout optimization
- Own D2D routing on organic (RDL) and silicon interposers for advanced-package, targeting > 64 Gbps per lane.
- Meet lane-mapping and skew-matching requirements for die-to-die connections.
- Work with the layout team on implementation and make sure the optimized pattern holds up after bumps, vias and layer transitions are included.
2. SI methodology, modeling and sign-off
- Run SI flow that combines 2D field-solver sweeps and 3D EM extraction.
- Characterize channels with insertion-loss and crosstalk.
- Build system-level eye simulations.
- Evaluate NEXT/FEXT, return loss.
3. PDN development for 64 Gbps D2D and 448 Gbps SerDes
- Architect, model and optimize the PDN from VRM to die bumps across die, interposer, package and board, for both the 64 Gbps D2D PHY and the 448 Gbps SerDes.
- Define PDN target impedance from the PHY current profile and the allowed supply ripple. Locate and damp PDN resonances (typically at hundreds of MHz).
- Plan decoupling capacitance across the hierarchy: on-die, deep-trench / interposer-embedded capacitors, package capacitors and board capacitors.
- Design power and ground plane structures, bump and via allocation, and power/ground bump-to-signal ratio for adequate return paths and shielding in dense bump fields.
- Run static IR drop, dynamic voltage drop and AC impedance analysis.
4. Cross-functional collaboration
- Work closely with analog/mixed-signal circuit designers, IP architects, package designers, layout engineers and foundry partners. Give clear, quantitative layout and PDN constraints, and turn circuit requirements into package and interposer requirements.
- Help define interposer and package stack-ups, materials,
bump pitch and design rules for new technology nodes and packaging platforms (2.5D and 3D).
- Produce clear design guidelines, reference layouts and checklists for the team, and mentor junior SI/PI and package engineers.
Required Qualifications
- MS/MTech or PhD in Electrical Engineering. BS with exceptional experience will be considered.
- 8+ years of hands-on SI/PI experience in high-speed IP, advanced packaging or PCB design. Experience on D2D (UCIe, BoW or similar) or HBM interfaces is strongly preferred.
- Proven experience routing and optimizing high-density interposer/package channels (organic RDL and/or silicon interposer), with an understanding of GSG shielding, crosstalk and via effects.
- Strong command of EM and circuit simulation tools: Ansys HFSS, Raptor/RaptorX, SIwave, Cadence Clarity 3D, Keysight ADS, plus 2D field solvers. Experience with PDN tools (Ansys RedHawk/Totem, Cadence Voltus, Sigrity or equivalent) is a plus.
- Solid foundation in transmission lines, S-parameters, VTF/channel metrics, eye diagrams and BER extrapolation, jitter, and equalization.
- Solid foundation in PDN theory: target impedance, decoupling strategy, resonance analysis, IR drop, and power-noise to jitter co-simulation.
- Experience with scripting (Python, Tcl, MATLAB or similar) to automate sweeps, post-processing and reporting.
- Clear written and verbal communication, and the ability to work independently on open-ended problems.
Contact:
Uday
Mulya Technologies
[email protected]
"Mining The Knowledge Community"
📌 Senior SI/PI Engineer (Bengaluru)
🏢 Omni Design Technologies
📍 Bengaluru