Design And Development Engineer (Chennai)

Design And Development Engineer (Chennai)

19 Nov
|
Nil
|
Chennai

19 Nov

Nil

Chennai

Location:
Chennai, Tamil Nadu Department: Engineering / Research & Development

Experience:
6–12 years (flexible for candidates with relevant expertise) Qualification: B.
E. / B.
Tech in Mechanical, Automobile, Production, Polymer or Rubber Technology Preferred Industry: Air Springs / Tyre Manufacturing / Rubber Engineering Products Position Objective To lead the design, development and validation of air springs for railway and commercial vehicle applications, including convoluted bellows and rolling sleeve designs. The role will be responsible for converting customer specifications and applicable RDSO requirements into complete product designs, engineering calculations, drawings, prototypes and validated products ready for serial production. The position requires strong hands-on experience in mechanical product design, rubber-reinforced product construction, mould development, prototype testing and new product development.

Key Responsibilities
1. Air Spring Product Design & Development
• Review customer specifications, drawings and applicable RDSO requirements to establish product design, performance and validation criteria.
• Understand application requirements, including load capacity, working height, suspension travel, operating pressure, available space, mounting arrangements and operating conditions.
• Select suitable air spring configurations, including convoluted bellows and rolling sleeve designs.
• Develop complete air spring assemblies, including rubber bellows, sleeves, reinforcement construction, pistons, end fittings, mounting interfaces and associated components.
• Establish product geometry, dimensions, tolerances and material requirements.
• Calculate effective area, air volume, required pressure, load capacity and spring rate across the operating height range.
• Develop load–deflection characteristics and evaluate product performance at minimum, nominal and maximum operating heights.
• Conduct design reviews to ensure product performance, reliability and manufacturability. 2. Rubber Reinforcement & Product Construction
• Develop rubber-reinforced product construction considering operating pressure, load requirements, fatigue life and application conditions.
• Define reinforcement fabric or cord specifications, ply orientation, number of plies and rubber layer construction.
• Establish inner liner, reinforcement and outer cover requirements for bellows and sleeve designs.
• Evaluate the influence of reinforcement geometry, rubber properties and construction on product performance.
• Coordinate with material and process engineering teams for rubber compound and reinforcement material selection.
• Support design improvements to achieve required durability, flexibility, pressure resistance and product consistency.
• Evaluate design feasibility considering calendering, ply cutting, bellow building and vulcanisation processes. 3. Mechanical Design, CAD & Engineering Documentation
• Prepare 3D models, assembly drawings, component drawings and manufacturing drawings using CATIA, SolidWorks or equivalent CAD software.
• Develop engineering calculations, product specifications and design documentation.
• Apply GD&T;, tolerance analysis, DFM and DFMA principles during product development.
• Design and develop metal components, end fittings, pistons, mounting arrangements and other mechanical interfaces.
• Prepare engineering BOMs, design verification documents and technical specifications.
• Maintain drawing revisions, design records and engineering change documentation.
• Support design optimisation through engineering analysis and simulation where applicable. 4. Mould & Tooling Development
• Develop mould concepts and detailed mould designs for air spring bellows and sleeve components.
• Define mould geometry, cavity profiles, parting lines and critical mould design features.
• Establish tooling requirements for rubber reinforcement positioning, bellow building, moulding and vulcanisation.
• Coordinate with mould manufacturers and suppliers for tooling design, development and manufacturing.
• Review tooling feasibility considering rubber flow,



reinforcement positioning, curing and demoulding requirements.
• Support mould trials, dimensional verification and design modifications.
• Investigate mould-related defects and implement design improvements.
• Coordinate with Process Engineering to ensure tooling suitability for prototype and serial production. 5. Prototype Development & Product Validation
• Lead prototype development from initial design through manufacturing trials, testing and product validation.
• Prepare Design Verification and Validation Plans against customer and applicable RDSO requirements.
• Define product testing requirements, acceptance criteria and validation methods.
• Evaluate pressure–load characteristics, vertical and lateral stiffness, dimensional performance and other applicable product requirements.
• Review agile, endurance, burst and other validation test results as specified.
• Analyse differences between calculated and measured product performance and implement necessary design modifications.
• Support fitment studies, field testing and application-specific product evaluations.
• Document validation results and establish product compliance before final design release. 6. New Product Development & Industrialisation
• Lead product development activities from customer requirements through prototype approval and production release.
• Support APQP activities, DFMEA, design reviews and product development documentation.
• Coordinate with Process Engineering, Production and Quality teams during prototype manufacturing and process validation.
• Support manufacturing feasibility studies, process requirements and product specifications.
• Participate in machine and tooling trials to ensure product designs can be consistently manufactured.
• Support engineering changes, product improvements and production implementation.
• Resolve design-related issues during development trials and initial production ramp-up.
• Ensure complete transfer of approved product design information to manufacturing. 7. Customer Application & Technical Support
• Participate in customer technical discussions to understand product applications and performance requirements.
• Conduct application studies and fitment evaluations for railway and commercial vehicle air spring systems.
• Review installation conditions, mounting arrangements, operating loads and suspension movement requirements.
• Support customer visits, field trials and product performance evaluations.
• Investigate product failures and field-related issues using engineering analysis and root cause investigation.
• Recommend design improvements based on test results, customer feedback and field performance. 8. Cross-Functional Coordination
• Coordinate with Process Engineering, Production, Quality, Procurement and external suppliers.
• Work with machinery and tooling suppliers during product development and validation.
• Support manufacturing teams with technical clarifications, design modifications and troubleshooting.
• Maintain product development schedules, trial reports and engineering documentation.
• Provide technical support during prototype development, customer validation and serial production. Required Technical Competencies
• Strong practical knowledge of mechanical product design and rubber-reinforced product development.
• Experience in air spring design, tyre construction, rubber reinforcement design or similar engineered rubber products.
• Understanding of air spring performance characteristics, including effective area, pressure, volume, load capacity and stiffness.
• Knowledge of convoluted bellows and rolling sleeve construction,



or the ability to develop this expertise from relevant reinforced-rubber product experience.
• Experience in mechanical design, assembly design, mould design and engineering drawings.
• Proficiency in CATIA V5, SolidWorks, AutoCAD or equivalent CAD software.
• Understanding of GD&T;, tolerance analysis, DFM and DFMA.
• Knowledge of rubber manufacturing processes, including calendering, building, moulding and vulcanisation.
• Experience in prototype development, mould trials, product testing and validation.
• Knowledge of DFMEA, APQP, engineering change management and root cause analysis.
• Ability to interpret customer technical specifications and engineering requirements. Preferred Experience
• Direct experience in developing complete railway or commercial vehicle air spring assemblies.
• Tyre industry experience in product design, tyre construction, reinforcement design, bead design or tyre development.
• Experience in rubber-reinforced products such as tyres, air springs, flexible bellows or similar components.
• Experience in designing and developing rubber moulds and associated tooling.
• Knowledge of rubber compounds, reinforcement fabrics, rubber-to-metal interfaces and vulcanisation.
• Experience with product performance testing, including pressure–load characteristics, stiffness, fatigue and endurance.
• Exposure to FEA, product simulation and design optimisation.
• Experience establishing new products from concept through prototype validation and production release.
• Experience working with overseas engineering teams, mould manufacturers and equipment suppliers. Key Deliverables
• Complete air spring product designs and engineering calculations.
• Approved 3D models, assembly drawings and component drawings.
• Product BOMs, material specifications and reinforcement construction details.
• Mould designs, tooling specifications and development drawings.
• Prototype development plans, trial reports and design modifications.
• DFMEA, design verification plans and product validation reports.
• Product performance calculations and validation against customer requirements.
• Approved design documentation and production release packages.
• Technical support for customer approvals, field issues and product improvements. Reporting and Working Relationships The position will work closely with the Business Unit Head, Engineering, Process Engineering, Production and Quality teams, along with external tooling suppliers, engineering consultants and customer engineering departments. Candidate Profile We are looking for a technically strong, hands-on Design & Development Engineer who can take ownership of air spring product development from customer requirements through design, prototype testing, validation and production release. The candidate should have practical experience in rubber-reinforced product design, mechanical engineering, mould development and product testing, with a good understanding of rubber manufacturing processes. Candidates from air spring manufacturing or tyre product development backgrounds will be preferred, particularly those with experience in reinforcement construction, product geometry, mould development and validation. The ability to independently develop complete air spring designs and engineering calculations will be a significant advantage. Candidates Target Priority Candidate Background
• Air spring design and product development engineer
• Tyre product design / tyre construction engineer
• Tyre R&D; / reinforcement and carcass design engineer
• Tyre mould design and product development engineer Product design & development: Converting customer requirements into engineering calculations, product geometry, reinforcement construction, complete assembly design and validated product performance. Mould & tooling development: Developing moulds and tooling required to manufacture the approved product design, including prototype trials, design modifications and manufacturing feasibility. Product validation & industrialisation: Verifying product performance against specifications, completing design validation and supporting the transfer of approved designs into stable serial production.

📌 Design And Development Engineer (Chennai)
🏢 Nil
📍 Chennai

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: design and development engineer (chennai) / chennai

Subscribe to this job alert:

Get the latest job offers by email for: design and development engineer (chennai) / chennai