Process Engineer (Chennai)

Process Engineer (Chennai)

19 Nov
|
Dellner Bubenzer
|
Chennai

19 Nov

Dellner Bubenzer

Chennai

Location: Chennai, Tamil Nadu

Department: Engineering / Manufacturing

Experience: 8–15 years (flexible for candidates with relevant expertise)

Qualification: B.E. / B.Tech / Diploma in Mechanical, Production, Polymer or Rubber Technology

Preferred Industry: Tyre Manufacturing / Air Springs / Rubber Engineering Products

Position Objective To lead the development, industrialisation and implementation of manufacturing processes for the new Air Spring production facility, with primary technical expertise in rubber processing, reinforcement preparation, bellow building and vulcanisation.

The role will have overall responsibility for establishing the complete manufacturing process, including assembly, testing, equipment commissioning, process validation and production readiness, working closely with Design Engineering, Quality and machinery suppliers.

The position requires strong hands-on experience in tyre or air spring manufacturing, particularly calendering, reinforced rubber product building, moulding and vulcanisation, along with the ability to develop and implement manufacturing processes for new products.

Key Responsibilities

1. Manufacturing Process Development

- Develop and implement manufacturing process flows for railway and commercial vehicle air springs, including convoluted bellows and rolling sleeve designs.
- Establish manufacturing processes covering rubber mixing, milling, calendering, ply cutting, bellow building, vulcanisation, finishing, assembly and testing.
- Take primary technical ownership of rubber processing, reinforcement preparation, bellow building and vulcanisation processes.
- Coordinate with Design Engineering, Quality and equipment suppliers to establish assembly and testing processes.
- Develop process parameters, operating procedures, manufacturing specifications and work instructions.
- Identify critical process parameters and quality characteristics for each manufacturing stage.
- Develop process controls to ensure repeatability, product consistency and manufacturing efficiency.
- Establish manufacturing process routings and material flow across the complete production line.

2. Equipment Selection, Installation and Commissioning

- Support technical evaluation and selection of manufacturing machinery and equipment.
- Define process requirements and technical specifications for rubber processing, calendering, bellow building and curing equipment.
- Coordinate with machinery suppliers for technical reviews, equipment trials and process requirements.
- Support machine layout, utilities, tooling, installation and commissioning activities.
- Participate in FAT, SAT, machine trials and process capability studies.
- Establish and validate machine settings, tooling requirements and manufacturing process parameters.
- Coordinate with equipment suppliers and relevant engineering teams for assembly and testing equipment commissioning.
- Ensure manufacturing process readiness before serial production.

3. Rubber Processing and Bellow Manufacturing

- Develop processes for rubber compound preparation, mixing, milling and calendering.
- Establish rubberised fabric preparation, ply cutting, reinforcement orientation and building processes.
- Develop bellow building sequences covering inner liners, reinforcement plies, bead/core placement and outer covers.
- Establish moulding and vulcanisation parameters, including cure time, temperature and pressure.
- Define critical process parameters affecting reinforcement positioning, adhesion, dimensional stability and product performance.
- Support rubber-to-metal bonding, end-fitting preparation, assembly and crimping operations as applicable.
- Troubleshoot rubber processing and manufacturing defects and implement corrective and preventive actions.
- Work with Design Engineering to ensure product construction is suitable for manufacturing.

4. Assembly, Testing and Overall Process Industrialisation

- Coordinate development of assembly processes for complete air spring products, including end fittings, pistons and associated components.
- Establish assembly sequences, tooling requirements, process controls and manufacturing documentation.
- Support development of crimping or other mechanical joining processes where applicable to the approved product design.




- Coordinate with Design Engineering and Quality to establish manufacturing requirements for air leakage, pressure retention, static and dynamic testing.
- Support installation, commissioning and process validation of assembly and testing equipment.
- Establish material flow, process integration and manufacturing readiness across the complete production line.
- Ensure smooth transfer of products between rubber processing, assembly, testing and final inspection.

5. New Product Development and Process Validation

- Support NPD activities from prototype development through production readiness.
- Conduct process trials, DOE and parameter optimisation.
- Develop manufacturing BOMs, process routings, process flow diagrams and trial reports.
- Coordinate prototype manufacturing, validation and engineering changes.
- Establish production feasibility, process capability and manufacturing readiness.
- Work with Design Engineering to resolve manufacturing feasibility and product construction issues.
- Support product and process validation before serial production.

6. Quality Planning and Process Control

- Prepare and maintain Process Flow Diagrams, PFMEA, Control Plans, SOPs and Work Instructions.
- Support APQP, PPAP and customer approval activities as applicable.
- Define critical process parameters and work with Quality to establish inspection methods and acceptance criteria.
- Support development of Quality Assurance Plans and manufacturing process validation documentation.
- Work with Quality and Engineering teams to establish test and validation requirements.
- Support compliance with applicable RDSO specifications, customer requirements and approved Quality Assurance Plans.
- Investigate process-related nonconformities using 8D, root cause analysis, SPC and other problem-solving methods.
- Implement process improvements to prevent recurrence of manufacturing defects.

7. Production Improvement and Cost Optimisation

- Improve cycle time, productivity, material utilisation and process efficiency.
- Reduce scrap, rework and process variation.
- Develop standard cycle times, process capacity calculations and manpower requirements.
- Establish production capacity and line balancing requirements across manufacturing operations.
- Implement poka-yoke, 5S, lean manufacturing and continuous improvement initiatives.
- Support manufacturing cost reduction without compromising quality or safety.
- Monitor manufacturing process performance and implement corrective actions where required.

8. Cross-Functional Coordination and Team Development

- Coordinate with Design Engineering, Production, Quality, Maintenance, Procurement and external equipment suppliers.
- Provide technical leadership for manufacturing process development and industrialisation activities.
- Support operator training, process knowledge transfer and skill development.
- Maintain process documentation, manufacturing records and technical reports.
- Provide technical support during production ramp-up and serial manufacturing.
- Guide and support additional process engineers or technicians as the manufacturing operation expands.

Required Technical Competencies

- Strong hands-on experience in tyre or air spring manufacturing, particularly calendering, reinforcement building and vulcanisation.
- Practical knowledge of rubber processing, including mixing, milling, calendering, building and curing.
- Experience in developing and implementing manufacturing processes for fabric-reinforced rubber products.
- Knowledge of reinforcement orientation, ply construction, bead/core placement and rubber product building.
- Understanding of vulcanisation, cure-cycle control and rubber processing defects.
- Experience in manufacturing machinery, tooling, process parameter development and equipment commissioning.




- Ability to lead manufacturing process industrialisation from machine installation through production readiness.
- Experience in PFMEA, Control Plans, APQP, SPC, DOE and root cause analysis.
- Ability to conduct machine trials, process validation, process capability studies and productivity improvements.
- Working knowledge of engineering drawings, tolerances and manufacturing documentation.
- Ability to coordinate assembly and testing process development with Design Engineering, Quality and equipment suppliers.

Preferred Experience

- Tyre manufacturing experience in building, calendering, curing or process industrialisation.
- Direct experience in air spring or air bellow manufacturing.
- Experience with fabric-reinforced rubber products such as tyres, air springs, flexible bellows or similar components.
- Experience establishing new manufacturing lines or commissioning rubber processing equipment.
- Experience in prototype development, manufacturing trials and process validation.
- Exposure to railway, automotive or commercial vehicle quality requirements.
- Knowledge of rubber-to-metal bonding, end-fitting preparation and assembly processes.
- Experience with air spring assembly, crimping and product testing processes.
- Experience working with overseas machinery suppliers and engineering teams.

Key Deliverables

- Approved manufacturing process flows and process routings covering the complete air spring manufacturing line.
- Manufacturing equipment, tooling and utility readiness.
- Established and validated rubber processing, calendering, building and curing parameters.
- Completed machine trials, process validation and commissioning reports.
- Defined assembly and testing processes in coordination with Design Engineering and Quality.
- PFMEA, Control Plans, SOPs and Work Instructions.
- Process capability, cycle-time, line balancing and production-capacity studies.
- Manufacturing readiness and successful transition from development trials to stable serial production.
- Reduction in process defects, scrap, rework and manufacturing cost.
- Established process documentation and technical knowledge for future manufacturing expansion.

Reporting and Working Relationships The position will work closely with the Business Unit Head, Design Engineering, Production, Quality, Maintenance and Procurement teams, along with machinery suppliers and external technical consultants. The role will have overall responsibility for manufacturing process development and industrialisation, with primary technical ownership of rubber processing, bellow building and vulcanisation.

Assembly and testing process development will be coordinated with Design Engineering, Quality and equipment suppliers.

Candidate Profile

We are looking for a technically strong, hands-on Lead Process Engineer who can take ownership of manufacturing process development and industrialisation for a new Air Spring production facility.

The candidate should have solid practical experience in tyre or air spring manufacturing, particularly rubber processing, calendering, reinforcement building and vulcanisation.

The person should be comfortable working on the shop floor, conducting machine trials, developing process parameters, resolving manufacturing problems and coordinating with machinery suppliers.

The ability to establish and integrate the complete manufacturing process, from rubber preparation through final assembly and testing, will be an important requirement.

Experience in new manufacturing line establishment and equipment commissioning will be a significant advantage.

Candidates Target

Priority

Candidate Background

1. Tyre building / process development engineer
2. Air spring / air bellow process engineer
3. Tyre calendaring and curing process engineer
4. Tyre manufacturing industrialisation / NPD engineer

Rubber processing & bellow manufacturing: Establishing and optimising rubber mixing, calendaring, reinforcement preparation, bellow building and vulcanisation processes.

Overall process industrialisation: Establishing the complete manufacturing line, selecting equipment, conducting trials, validating process parameters and achieving production readiness.

Production process improvement: Improving cycle times, reducing scrap, troubleshooting defects and maintaining manufacturing process stability.

📌 Process Engineer (Chennai)
🏢 Dellner Bubenzer
📍 Chennai

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: process engineer (chennai) / chennai