19 Nov
|
Qtrino Labs
|
Delhi
QTrinoLabs is seeking a hands-on Lead FPGA Design Engineer to take end-to-end ownership of FPGA implementationfrom synthesizable RTL through floorplanning, placement, routing, and timing closure. This role blends datapath design, physical implementation, and targeted board bring-up. You will work closely with RTL, verification, and firmware engineers to deliver robust, high-performance FPGA solutions.
Role & responsibilities
- RTL & Datapath Development: Design pipelined datapaths and platform controllers while efficiently mapping arithmetic, memories, and control logic to FPGA resources.
- Physical Implementation & Timing Closure: Own clock and I/O constraints, floorplans, implementation runs, resource budgets, and timing closure across all supported configurations.
- Reconfigurable Architecture: Implement static and reconfigurable regions, interface isolation, and compatible configuration builds.
- System Integration & Bring-Up: Integrate memory and peripheral IP, and diagnose clock, reset, calibration, and interface failures directly on hardware.
- Hardware Debugging: Write focused register-access and diagnostic code for owned interfaces, resolving RTL and implementation issues uncovered during verification.
- Build & Release Management: Maintain reproducible build scripts, peer-reviewed constraints, and implementation reports tied strictly to tested design revisions.
Preferred candidate profile
- Education & Experience: B.E./B.Tech or M.E./M.Tech in ECE, EE, or EEE with at least 3 years of relevant hands-on experience in FPGA design and implementation.
- RTL Design: Solid hands-on experience in Verilog or SystemVerilog covering synchronous control, arithmetic logic, FSMs, pipelined datapaths, and backpressure handling.
- FPGA Implementation:
End-to-end experience covering synthesis, floorplanning, placement, routing, timing closure, and basic board bring-up.
- Static Timing Analysis (STA): Working knowledge of clock and I/O constraints, generated clocks, setup/hold checks, clock uncertainty, and justified timing exceptions.
- CDC & Reset Design: Experience architecting safe clock-domain crossings (CDC) and reset-domain crossings using synchronizers, asynchronous FIFOs, and controlled reset sequencing.
- Implementation Analysis: Ability to analyze timing and resource reports to resolve critical paths, routing delays, congestion, and high fanout, while balancing throughput, latency, and area trade-offs.
- Register-Level Software: Basic C programming and MMIO register-access skills for low-level hardware debugging.
- Tools & Automation: Practical proficiency with FPGA implementation toolchains, Tcl or Python scripting for build automation, and Git version control.
Preferred Exposure (Nice to Have)
- Platform Tools: Experience with AMD Vivado implementation and debug flows (XDC/SDC constraints, design checkpoints, implementation strategies, and on-chip debug tools like ILA/VIO).
- Dynamic Reconfiguration: Exposure to partial reconfiguration and nested Dynamic Function eXchange (DFX), including Pblock planning, partition interfaces, isolation, and configuration compatibility.
- Datapath Optimization: Experience optimizing FPGA datapaths via DSP mapping, wide arithmetic, memory banking, and scheduling.
- High-Speed Interfaces: Hands-on experience with PCIe or DDR integration, board bring-up, and peripheral-driver development.
- Advanced Flows: Familiarity with incremental builds, configuration-image automation, automated CDC/RDC analysis, formal checks, and power/thermal estimation.
📌 Lead FPGA Design Engineer (FPGA Design, Physical Implementation, and T (Delhi)
🏢 Qtrino Labs
📍 Delhi