20 Nov
|
StepsWorths Consultancy Services
|
Chandigarh
20 Nov
StepsWorths Consultancy Services
Chandigarh
:
1. Incoming Material Inspection & Release
- Lead incoming inspection and release of materials used in SMT/PCBA production.
- Inspect electronic components, bare PCBs, solder paste, adhesives, labels, packaging materials and other production consumables as applicable.
- Verify incoming material against approved drawings, specifications, BOM and purchase requirements.
- Ensure receiving inspection is completed before material is released to production.
- Define and maintain appropriate inspection plans and sampling levels based on material criticality and supplier performance.
- Ensure rejected or suspected material is physically/systematically blocked to prevent unintended use.
1. Electronic Component Quality Control
- Verify electronic components for correct part number, manufacturer, MPN, package, value, rating, polarity and identification.
- Inspect component packaging, reel condition, labeling and physical condition.
- Verify supplier/manufacturer documentation such as CoC/CoA where required.
- Check date code, lot/batch information and traceability requirements.
- Ensure moisture-sensitive components are received in appropriate moisture-barrier packaging with required indicators/desiccant where applicable.
- Identify abnormalities such as damaged leads, oxidation, broken packaging, contamination or incorrect labeling.
1. Bare PCB Incoming Quality
- Inspect incoming bare PCBs against applicable drawings and specifications.
- Check PCB dimensions, thickness, surface condition, marking, warpage and visible damage as required by the inspection plan.
- Verify critical characteristics and supplier inspection documentation where specified.
- Ensure PCB lot/date-code traceability.
- Coordinate additional technical evaluation when abnormalities are detected.
- Prevent non-conforming PCBs from entering SMT production.
1. Solder Paste & Consumable Control
- Verify solder paste material type, alloy/specification, batch number and shelf life.
- Check storage/transport conditions and packaging integrity upon receipt.
- Ensure expired or damaged material is not released.
- Verify incoming adhesives, fluxes, chemicals and other process consumables against approved specifications.
- Coordinate with Stores to maintain appropriate FIFO/FEFO control for shelf-life-sensitive materials.
1. Receiving Inspection Planning & Sampling
- Develop and maintain incoming inspection standards and check sheets.
- Establish appropriate inspection frequency and sampling based on material risk, supplier history and quality performance.
- Define critical, major and minor defect classifications where applicable.
- Implement tightened inspection for problematic suppliers/materials and reduce inspection only after demonstrated process stability and approval.
- Ensure inspection results are documented and traceable.
1. Supplier Quality Issue Management
- Lead the initial response for supplier-related quality problems identified at receiving or during production.
- Immediately contain suspected incoming material to protect SMT production.
- Issue supplier quality notifications/rejection reports as per company procedure.
- Coordinate replacement, sorting, rework or return of rejected material.
- Obtain supplier root-cause analysis and corrective action.
- Review supplier 8D / corrective-action responses for technical adequacy.
- Verify effectiveness of supplier corrective actions and prevent recurrence.
1. Rejection & Non-Conforming Material Management
- Ensure rejected materials are clearly identified, segregated and blocked.
- Maintain dedicated quarantine/hold control for non-conforming material.
- Coordinate disposition through MRB, return-to-vendor, sorting, rework, deviation or scrap processes, as applicable.
- Prevent unauthorized release of rejected/suspect material.
- Maintain rejection and disposition records for complete traceability.
- Monitor ageing of materials in the quality-hold area and drive timely closure.
1. Production Line Protection
- Ensure only approved and quality-released materials enter SMT production.
- Immediately initiate containment when a supplier defect is discovered during production.
- Trace affected supplier lot/batch across Stores, WIP and production lines.
- Coordinate controlled sorting or screening where required.
- Provide clear OK/Not-OK acceptance criteria to Production and Stores.
- Support fast disposition to minimize production-line disruption without compromising quality.
1. Supplier Performance Monitoring
- Track incoming rejection trends by supplier, commodity and defect category.
- Monitor supplier performance through metrics such as:
- Incoming PPM
- Lot acceptance/rejection rate
- Repeat defects
- Corrective-action closure
- 8D response effectiveness
- Supplier-caused production disruption
- Prepare supplier defect Pareto and trend analysis.
- Escalate recurring or high-risk supplier quality concerns.
- Support supplier performance reviews and improvement programs.
1. Root-Cause & Corrective Action
- Perform preliminary root-cause analysis for incoming-quality failures.
- Use structured problem-solving methods such as 5-Why, Fishbone, Pareto and 8D.
- Work with suppliers to establish robust root causes rather than symptom-based corrections.
- Verify implementation and effectiveness of corrective/preventive actions.
- Maintain lessons learned from significant supplier defects.
1. Counterfeit & Wrong-Material Prevention
- Verify supplier, manufacturer, part-number and labeling consistency for electronic components.
- Identify unusual marking, packaging or traceability discrepancies that require further verification.
- Escalate suspected counterfeit, mixed or non-approved components according to internal quality procedures.
- Ensure material is sourced/released only against approved specifications and approved sources.
- Maintain appropriate traceability for critical electronic components.
1. Measurement & Inspection Equipment
- Ensure gauges and inspection equipment used for receiving inspection are appropriate and calibrated.
- Use suitable measuring instruments such as vernier calipers, micrometers, height gauges and optical inspection equipment, depending on the characteristic being inspected.
- Ensure inspectors follow approved measurement methods.
- Support MSA/Gauge R&R; activities for critical measurement systems where applicable.
- Maintain inspection-equipment records and calibration status.
1. NPI & New Component Qualification
- Support incoming-quality readiness during Current Product Introduction (NPI).
- Review new component/material specifications and inspection requirements.
- Develop receiving inspection plans for new materials.
- Support qualification of new supplier materials/components where required.
- Coordinate initial/sample inspection and approval before serial use.
- Ensure quality controls are established before SOP.
1. Supplier Change Management
- Monitor supplier-related changes affecting product quality, such as manufacturing location, material, process or component changes.
- Ensure changes are evaluated and approved before implementation where required.
- Coordinate validation/inspection requirements for changed material.
- Ensure updated specifications and quality documents are available before material release.
1. Documentation & Traceability
- Maintain complete records for:
- Incoming inspection
- Supplier/batch/lot traceability
- Inspection results
- Rejected material
- Supplier complaints
- 8D/corrective actions
- Deviations/concessions
- Material release/hold status
- Ensure inspection instructions and specifications remain current.
- Maintain records according to internal/customer retention requirements.
1. Quality System & Audit Support
- Support incoming-quality requirements within the plant quality management system.
- Participate in internal, customer and supplier audits.
- Ensure receiving-inspection processes are audit-ready.
- Close audit findings within agreed timelines.
- Support automotive quality-system activities including Control Plan, PFMEA, MSA and PPAP/APQP, where applicable to incoming/supplier quality.
1. Cross-Functional Coordination
- Work closely with Purchase, SCM, Stores, Production, Process Engineering, Plant Quality and Supplier Quality.
- Communicate material-quality risks before they affect production.
- Coordinate supplier containment and replacement plans with Purchasing/SCM.
- Support Production and Process Engineering during component-related line issues.
- Escalate high-risk supplier concerns to Quality/SMT Plant management.
1. Training & Quality Awareness
- Train receiving-quality inspectors on inspection requirements and defect criteria.
- Develop defect samples, visual standards and inspection guidelines.
- Improve awareness of ESD, MSD, component handling and traceability requirements.
- Conduct periodic competency assessments for incoming inspectors.
- Share supplier-quality lessons learned with Stores and Production teams.
Key Skills / Competencies
- Electronic component & PCB inspection
- Incoming/Receiving Quality Control
- Supplier quality management
- Electronic component traceability
- ESD/MSD handling knowledge
- Sampling and inspection planning
- Non-conforming material & MRB management
- Supplier 8D and corrective-action management
- Root-cause analysis: 8D, 5-Why, Fishbone, Pareto
- PPAP/APQP fundamentals
- PFMEA, Control Plan and MSA
- NPI incoming-quality readiness
- Supplier performance monitoring and PPM analysis
- Quality documentation and audit support
- Good coordination with suppliers, purchasing and production
📌 Sr.Eng/AM-Receiving Quality Inspection (Derabassi) (Chandigarh)
🏢 StepsWorths Consultancy Services
📍 Chandigarh