Verkada Physical Security Engineer- Freelancing (Bengaluru)

Verkada Physical Security Engineer- Freelancing (Bengaluru)

20 Nov
|
Inoptra Digital
|
Bengaluru

20 Nov

Inoptra Digital

Bengaluru

Job Description: Verkada Physical Security Engineer (Remote Configuration)

Company: InOpTra

Role: Verkada Physical Security Engineer – Remote Configuration and Commissioning

Experience: 5–8 years in physical security systems, with at least 2 years of hands-on Verkada experience

Location: Remote, with working-hours overlap with US Eastern Time [to be confirmed]

About the Role

InOpTra is looking for a hands-on Verkada engineer to remotely configure and commission a new office site for an enterprise client. This is Phase 2 of a multi-site rollout. The client’s Verkada Command tenant and Microsoft 365 identity integration are already live from Phase 1.

You will add the new site to the existing tenant, adopt all devices, and configure access control, video, intercoms, alarms and sensors to match the client’s existing standards. A local installation partner will handle all physical installation and cabling. You will coordinate remotely with the in office technicians during joint testing.

If this engagement goes well, more regional sites of a similar size (10–15 doors and 10–20 cameras per site) are expected to follow.

Hardware in Scope (39 Devices)

CategoryDevices

Access control

1 × AC62 16-door controller, 11 × AD34 multi-format readers

Intercoms

2 × TD53 video intercoms, 2 × TK74 touchscreen intercoms

Video

8 × CD43 indoor dome cameras, 2 × CF83-E fisheye cameras

Alarms and sensors

1 × BP52 alarm panel (cellular backup), 1 × WH32 wireless repeater, 3 × hardwired panic buttons, 4 × SV21 air quality sensors, 4 × BR35 wireless water leak sensors

Key Responsibilities

1. Tenant Adoption and Standards

- Create the new site in the existing Verkada Command tenant
- Claim and adopt all 39 devices into the recent site
- Apply the client’s existing naming conventions to all devices, access levels and cameras
- Create the three site access levels (Full Access, Lobby Access and Office Access) following the client’s existing convention
- Assign default Verkada system roles only (such as Access Site Admin, Site Admin and Site Viewer)

2. Access Control and Schedules

- Map the existing synced M365 groups (an Office group and an Admins group) to the new site’s access levels
- Create three base door schedules (business hours, after-hours and weekends) and apply them to all new doors
- Support a parallel run with the legacy access control system during the transition

3. Video and Camera Alerts

- Configure 30-day video retention,



subject to the capabilities of the installed cameras
- Configure baseline motion alerts and alert recipients
- Restrict viewing permissions for designated sensitive-area cameras (gym and safe room) to Admins only

4. Intercoms

- Configure the four intercoms with local station routing, using reception as the primary receiver followed by a defined fallback sequence
- Set up door unlock logic for intercom calls

5. Alarms and Sensors (new for this site)

- Configure the BP52 alarm panel for 24×7 professional monitoring, with monitoring-agent video access disabled
- Program the three hardwired panic buttons for immediate dispatch alerting
- Configure partitions, arm/disarm schedules, keycodes, emergency contacts and dispatch instructions
- Set threshold alerts for SV21 sensors (temperature, humidity and air quality) and BR35 water leak sensors

6. Testing and Handover

- Lead one remote joint testing session with on-site installers, covering readers, door unlocks, intercoms, cameras, alarms, panic buttons and sensors
- Prepare as-built documentation
- Run a remote review and handover session with the client’s IT team

Out of Scope

- Physical installation, cabling and high-voltage electrical work
- Fire alarm panel integration
- Network switch provisioning and VLAN routing (handled by client IT)
- SCIM/SSO provisioning, mapping and troubleshooting (groups can be created in advance if needed)
- Alarm permitting (handled by the client)
- Raising alarms from SV21 sensors, which Verkada’s New Alarms platform does not support

Must-Have Requirements

- Verkada Command: Hands-on experience with site creation, device claiming and adoption, and multi-site tenant administration
- Verkada access control: Experience configuring AC-series controllers, readers, access levels, door schedules and system roles
- Identity integration: A clear understanding of how M365/Entra ID groups sync to Verkada through SCIM/SSO, and how to map them to access levels
- Verkada intercoms: Experience configuring call routing, receivers, fallback sequences and door unlock from intercom calls
- Verkada video: Experience with retention settings,



motion alerts and camera-level permission restrictions
- Verkada alarms: Experience configuring professionally monitored alarm panels, hardwired inputs and zones, partitions, and dispatch settings, plus knowledge of the differences between New Alarms and Classic Alarms
- Environmental sensors: Experience setting threshold alerts for air quality and water leak sensors
- Remote commissioning: A proven ability to run joint testing remotely with in office installers
- Documentation: The ability to produce clear as-built documentation and run client handover sessions

Nice-to-Have

- Verkada product certifications or partner training
- Experience with other physical security platforms (such as Genetec, Avigilon, Lenel, Milestone or Brivo), as the client works with multiple vendors
- Experience with multi-site rollouts and replicating standards across sites
- Experience working with financial-services clients

Key Deliverables

No.Deliverable

1

New site created and all 39 devices adopted

2

Access levels, role assignments and group mappings configured

3

Three door schedules created and applied

4

Video retention, motion alerts and restricted camera permissions configured

5

Intercom routing and door unlock logic configured

6

Alarm panel, panic buttons and sensor alerts configured

7

Joint testing completed with results recorded

8

As-built documentation and handover session

Client Inputs Required Before Configuration

These inputs are listed so that the engineer can confirm they have been received before starting:

- Naming conventions or a reference configuration from the existing site
- User and group mappings, door permissions and admin role assignments
- Business hours, applicable doors and the intended behaviour for each schedule
- Intercom receivers, fallback order and station assignments
- List of sensitive-area cameras, approved Admin viewers and motion alert recipients
- Alarm panel zones, wiring details, partitions, schedules, keycodes, the emergency contact list and dispatch instructions
- Confirmation of alarm permit status before joint testing

Notes on this draft

- I left out the client, installer and partner names (Abrams Capital, Stark Tech, SSI and SVHEC) because JDs are usually shared externally. Please add them back if this is for internal use only.
- The experience range (5–8 years overall, 2+ years on Verkada) and the location are my assumptions, since your requirement did not specify them.

📌 Verkada Physical Security Engineer- Freelancing (Bengaluru)
🏢 Inoptra Digital
📍 Bengaluru

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: verkada physical security engineer- freelancing (bengaluru) / bengaluru