JMV is Hiring:
Role: Firmware Engineer
Department: R&D;/Product development
Location: Noida Sector 11
Experience: 1.5yrs - 3yrs
About the Role:
We are looking for a hands-on Firmware Engineer to join our R&D team working on railway signalling and surveillance products. You will develop firmware for microcontroller-based boards and IP camera platforms, from driver development through integration and testing. Exposure to safety-critical (SIL-4) software development is a strong plus.
Key Responsibilities:
Microcontroller Firmware
- Develop and maintain embedded C firmware for ARM Cortex-M microcontrollers (STM32
or similar), both bare-metal and RTOS-based (FreeRTOS or similar).
- Write peripheral drivers for GPIO, ADC, timers, DMA, UART, SPI, I2C, CAN, RS-485, and
Ethernet.
- Implement communication protocols, bootloaders, and firmware update mechanisms.
- Debug using JTAG/SWD, oscilloscopes, and logic analysers during board bring-up with the
hardware team.
Camera Firmware
- Work on embedded Linux for IP camera SoCs, including BSP setup, U-Boot, kernel
configuration, and device drivers.
- Integrate image sensor drivers, video encoding pipelines (H.264/H.265), and streaming
(RTSP/RTP).
- Support ONVIF integration, network configuration, and remote management features.
- Coordinate with SoC vendors and design houses on SDK integration and issue resolution.
SIL-4 Products (Optional / Preferred)
- Develop firmware for safety-critical railway products following EN 50128 and IEC 61508
practices.
- Support defensive programming, diagnostics, redundancy handling, and coding standards
such as MISRA C.
- Contribute to requirements traceability, unit testing, and verification documentation for
RDSO/CENELEC compliance.
General:
- Maintain code in version control (Git) and follow structured review practices.
- Prepare design documents, test reports, and release notes.
- Support system integration, field testing, and issue analysis.
Required Skills:
- B.E./B.Tech in Electronics, Computer Science, or a related field.
- About 2 years of hands-on embedded firmware development experience.
- Solid embedded C programming and good understanding of MCU architecture and
peripherals.
- Experience with at least one RTOS and common communication protocols.
- Comfortable reading schematics and datasheets, and debugging on real hardware.
Preferred Skills:
- Embedded Linux experience (Yocto/Buildroot, device drivers, cross-compilation).
- Exposure to video streaming, camera sensors, or multimedia frameworks (GStreamer,
V4L2).
- Familiarity with MISRA C, static analysis tools, and safety standards (EN 50128, IEC
61508).
- Python or shell scripting for test automation.
To Apply:
Interested candidates can share their CVs on provide mail and number:
[email protected]
+91-XXXXXXXXXX
Pay: ₹25,000.00 - ₹40,000.00 per month
Work Location: In person
📌 Firmware Engineer (Noida)
🏢 JMV LPS
📍 Noida