DFT Engineer – Advanced Nodes (5nm and Below) (India)

DFT Engineer – Advanced Nodes (5nm and Below) (India)

20 Nov
|
Best NanoTech
|
India

20 Nov

Best NanoTech

India

DFT Engineer Advanced Nodes (5nm and Below)

Employment Type: Permanent
Location: Anywhere in India
Work Mode: Remote / Work From Home (WFH)
Experience Required: Minimum 5 Years
Technology Node: 5nm and Below (Mandatory)
Tape-Out Experience: Minimum 4 Successful Tape-Outs Below 5nm

1. Role Overview

We are looking for an experienced Design for Test (DFT) Engineer with hands-on expertise in DFT architecture, implementation, and verification for advanced-node SoCs and subsystems.

The role involves scan insertion, scan compression, ATPG, MBIST/LBIST, test coverage closure, and DFT signoff for semiconductor designs at 5nm and below.

Candidates must have a minimum of 5 years of relevant DFT experience, direct ownership of at least 4 successful tape-outs below 5nm, and practical experience with UPF-based low-power designs.

2. Key Responsibilities

- Develop and implement DFT architectures for complex SoCs and subsystems at 5nm and below.

- Perform scan insertion, scan chain configuration, and scan compression implementation.

- Develop and execute Automatic Test Pattern Generation (ATPG) flows for stuck-at, transition, and other applicable fault models.

- Analyze test coverage, debug DFT violations, and achieve coverage closure.

- Implement and verify Memory Built-In Self-Test (MBIST) architectures for embedded memories.

- Support Logic Built-In Self-Test (LBIST) insertion, implementation, and verification.

- Implement and validate JTAG (IEEE 1149.1) and IJTAG (IEEE 1687) test access architectures.

- Integrate DFT structures into UPF-based low-power designs, including power-domain and test-mode considerations.

- Perform gate-level simulation (GLS) and validation of ATPG and DFT test patterns.





- Address timing-aware DFT challenges, including test-mode timing constraints and scan-related timing issues.

- Collaborate with RTL design, physical design, STA, and verification teams to resolve DFT integration and signoff issues.

- Support DFT signoff, tape-out readiness, post-silicon validation, and silicon bring-up activities.

3. Required Qualifications
- Bachelor's or Master's degree in Electronics, Electrical Engineering, VLSI, Microelectronics, or a related discipline.

- Minimum 5 years of relevant hands-on DFT engineering experience.

- Proven DFT implementation experience on 5nm or more advanced technology nodes.

- Minimum 4 successful tape-outs at nodes below 5nm, with direct DFT ownership and implementation responsibilities.

- Hands-on experience with scan insertion, scan compression, ATPG, and test coverage closure.

- Practical experience implementing and verifying MBIST and/or LBIST structures.

- Working knowledge of JTAG, IEEE 1149.1, and IEEE 1687 (IJTAG).

- Mandatory hands-on experience with UPF-based low-power DFT implementation.

- Experience with Synopsys TestMAX, DFT Compiler, TetraMAX, and/or Siemens Tessent.

- Understanding of DFT timing constraints, gate-level simulation, and SoC test integration.

4. Technical Skills

DFT Architecture and Implementation

- Design for Testability (DFT)





- SoC / Subsystem DFT Architecture

- Scan Insertion and Scan Chain Design

- Scan Compression and Decompression

- DFT Integration and Signoff

ATPG and Test Coverage

- Automatic Test Pattern Generation (ATPG)

- Stuck-At Fault Testing

- Transition Fault Testing

- Fault Coverage Analysis

- Test Pattern Generation and Validation

- Test Coverage Closure

Built-In Self-Test

- Memory Built-In Self-Test (MBIST)

- Logic Built-In Self-Test (LBIST)

- Memory Test Integration and Verification

- BIST Architecture and Debugging

Test Access and Standards

- JTAG IEEE 1149.1

- IJTAG IEEE 1687

- Test Access Mechanisms

- DFT Test Controllers

Advanced Nodes and Low-Power Design

- 5nm and Below Technology Nodes

- Advanced FinFET / GAA Technology (as applicable)

- Unified Power Format (UPF)

- Low-Power DFT Integration

- Multi-Power-Domain SoC Designs

- Test-Mode Power Management

EDA Tools

- Synopsys TestMAX

- Synopsys DFT Compiler

- Synopsys TetraMAX

- Siemens Tessent

Verification and Signoff

- Gate-Level Simulation (GLS)

- Timing-Aware ATPG

- Scan Timing Analysis

- DFT Rule Checking

- DFT Signoff and Tape-Out Support

- Post-Silicon Test and Bring-Up

Significant Candidate Eligibility Criteria

Candidates must meet all four mandatory requirements:

- Minimum 5 years of relevant DFT experience.

- Hands-on DFT implementation experience at 5nm or below.

- Minimum 4 successful tape-outs with direct DFT ownership at nodes strictly below 5nm.

- Hands-on experience with UPF-based low-power designs.

Candidates who do not meet these mandatory criteria will not be considered for this position.

#LI-SD1

📌 DFT Engineer – Advanced Nodes (5nm and Below) (India)
🏢 Best NanoTech
📍 India

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: dft engineer – advanced nodes (5nm and below) (india) / india