20 Nov
|
Racanaa Energy
|
Bengaluru
20 Nov
Racanaa Energy
Bengaluru
About the role
Looking for a Senior Verification & Validation (V&V;) Engineer to own and execute verification and validation activities for our Energy Monitoring, Industrial IoT, and Connected Device products. The role will focus on validating pre-production and production firmware, embedded systems, communication interfaces, sensor/meter integrations, data acquisition, data integrity, connectivity, system reliability, and end-to-end device functionality. The ideal candidate should be comfortable working hands-on with embedded Linux/MCU-based systems, HIL setups, test automation, communication protocols, smart energy meters, industrial sensors, and cloud-connected IoT devices. You will work closely with Firmware, Embedded Hardware, Cloud, Product, and Manufacturing teams to ensure that releases meet functional, performance, reliability, and data-quality requirements before deployment to production.
Key Responsibilities
Requirements & System-Level V&V;
• Collaborate with Firmware, Hardware, Product, Cloud, and Systems teams to understand product requirements and system architecture.
• Participate in requirement analysis and High-Level Design (HLD) reviews from a testability and verification perspective.
• Review requirements for clarity, completeness, measurability, and testability.
• Develop Requirements Traceability Matrix (RTM) linking requirements → test cases → test results → defects.
• Identify verification gaps, ambiguities, edge cases, and potential failure modes early in the PDLC.
• Participate as a V&V; stakeholder throughout the complete Product Development Life Cycle (PDLC).
• Review and approve relevant V&V; documentation and act as a V&V; sign-off authority where applicable. Firmware Verification & Validation
• Develop comprehensive verification strategies for embedded firmware releases.
• Create test plans, test scenarios, test cases, test scripts, and acceptance criteria.
• Perform validation of: New firmware features, Firmware upgrades, Configuration changes, Boot and initialization sequences, Device provisioning, Fault handling and recovery, Watchdog and reset mechanisms, Persistent configuration, Time synchronization, Logging and diagnostics, OTA/remote firmware upgrade functionality, where applicable
• Perform pre-production and production firmware validation.
• Validate firmware behavior across different hardware revisions and product configurations.
• Verify backward compatibility between firmware, device configuration, communication interfaces, and cloud/backend systems. Communication Protocol & Interface Testing Hands-on validation of embedded communication interfaces including:
• UART / Serial
• RS-485
• MODBUS RTU, MODBUS TCP, TCP/IP
• LTE / Cellular
• Wi-Fi
• LoRaWAN
• MQTT/HTTP or equivalent IoT protocols, where applicable.
• Device-to-meter and device-to-cloud communication. Test scenarios should include: Valid and invalid packets, CRC/checksum errors, Packet corruption, Timeout handling, Retries, Duplicate packets, Partial packets, Communication loss/recovery, Device restart during communication, Network switching/reconnection, High-frequency data acquisition, Bus contention, Incorrect meter/sensor responses, Boundary values and malformed data, Long-duration communication stability Smart Meter & Sensor Validation
• Validate integration and data acquisition from multiple field devices, including:
• Energy Meters
- Smart energy meters, Voltage/current measurements, Active/reactive/apparent energy, power factor, frequency, Import/export energy,
Meter registers, Meter scaling and multipliers, Cumulative and instantaneous parameters,
• Water Flow Meters
- Pulse/output-based meters, MODBUS-based flow meters, LoRa WAN-based water flow meters, Flow rate and cumulative consumption, Missing/duplicate/out-of-sequence readings, Meter rollover and reset scenarios
• Gas Flow Meters
- Flow rate, Totalized consumption, Meter scaling, Communication failures, Invalid/missing readings
• Fuel-Level Sensors
- PT-based fuel-level sensors, Analog acquisition and conversion, Calibration and scaling, Noise and signal stability, Open/short sensor conditions, Out-of-range values
• Capacitive Sensors
- Sensor state detection, Threshold validation, Noise/bounce handling, Environmental variation, False-positive/false-negative scenarios Data Integrity & Data Quality Testing A critical responsibility of this role will be ensuring that field data remains correct from sensor/meter → embedded device → communication layer → backend. The engineer should validate:
• Accuracy of acquired data
• Data type and scaling
• Unit conversion
• Timestamp correctness
• Sequence numbers
• Counter values
• Cumulative values
• Meter rollover
• Duplicate data
• Missing data
• Out-of-order data
• Corrupted data
• Data truncation
• Decimal/precision issues
• Endianness
• Signed/unsigned conversion
• Floating-point/integer conversion
• Persistent data after reboot
• Data consistency during network failures
• Buffer overflow/underflow scenarios
• Store-and-forward behaviour
• Data recovery after connectivity restoration
• Device-to-cloud data consistency The engineer should be capable of performing end-to-end data reconciliation between the physical measurement source and the final cloud/application data. HIL & System Testing Design, develop, and maintain Hardware-in-the-Loop (HIL) and system-level test environments. Responsibilities include:
• Develop HIL test setups for embedded devices.
• Simulate meters, sensors, communication interfaces, and abnormal field conditions.
• Automate device stimulus and response validation.
• Test firmware without requiring physical field devices for every test scenario.
• Perform boundary and fault-injection testing.
• Validate behavior under
- Power cycling, Brownout conditions, Communication failures, Sensor failures, Invalid meter responses, Network outages, Reboots, Watchdog resets, High data traffic, Long-duration operation Experience with programmable power supplies, serial interfaces, RS-485 simulators, protocol simulators, electronic loads, signal generators, and other test instrumentation would be valuable. Regression Testing Own the embedded firmware regression process.
• Establish and maintain a firmware regression suite.
• Identify critical test cases that must run for every release.
• Execute: Smoke testing, Sanity testing, Feature regression, Integration regression, System regression, End-to-end regression
• Maintain regression coverage across multiple hardware and firmware versions.
• Identify test cases suitable for automation.
• Analyze regression failures and determine whether failures originate from firmware, hardware, test infrastructure, communication, or external systems. Test Automation
• Develop and maintain automated testing infrastructure to reduce manual testing effort and improve coverage.
• Strong hands-on experience with: Python, PyTest / unittest, Serial automation, UART automation, RS-485/MODBUS automation, TCP/IP socket automation, REST API automation, MQTT automation, Log parsing, Test-result reporting, Automated firmware flashing, Device reset/power-cycle automation, Data comparison and validation Automation should cover repetitive and high-value scenarios such as: Configure Device → Flash Firmware → Connect Meter Simulator → Generate Meter Data → Acquire Data → Transmit Data → Validate Cloud/API Data → Inject Failure → Recover → Verify Data Integrity.
• Experience integrating automated tests into CI/CD pipelines is highly desirable. Performance, Reliability & Stress Testing
• Design and execute long-duration and stress tests to validate product stability.
• The engineer should be able to distinguish between functional failures, resource leaks, timing issues, communication problems, and genuine firmware defects. Defect Identification & Root-Cause Analysis
• Identify, reproduce, document, prioritize, and track defects.
• Create high-quality defect reports with: Clear description, Preconditions, Environment, Hardware revision, Firmware version, Configuration, Test steps, Expected result, Actual result, Logs, Packet captures, Serial traces, Screenshots/data evidence and Reproducibility
• Work closely with Firmware and Hardware engineers to isolate root causes.
• Perform defect verification after fixes.
• Maintain defect regression coverage to prevent recurrence along with History Sheet
• Participate in RCA, 5W2H, CAPA, and corrective/preventive action discussions, where applicable. Production Validation
• Support validation of firmware and hardware before production deployment. Documentation & Quality
• Create and maintain: V&V; strategy, Test plan, Test scenarios & cases, Test scripts
• Ensure that V&V; processes comply with applicable organizational quality processes and relevant industry standards. Required Technical Skills Embedded Systems: Solid understanding of: Microcontrollers and SoCs, Embedded firmware architecture, Bootloader and firmware upgrade concepts, Interrupts, Timers, GPIO, ADC/DAC, PWM, Watchdog, RTC, Flash/EEPROM, Memory management, Embedded debugging Specific experience with some of the following is strongly preferred: STM32, ESP32, NXP i.
MX 6ULL, Embedded Linux, SOM-based embedded systems Communication Protocols: Must have strong practical knowledge of at least several of UART, RS-232, RS-485, Modbus RTU, Modbus TCP, TCP/IP, UDP, MQTT, HTTP/HTTPS, LTE/4G, Wi-Fi, LoRaWAN Candidate should understand practical protocol-level debugging, including: Frame structure, CRC, Addressing, Baud rate, Parity, Stop bits, Timeouts, Retries, Packet sequencing, Connection management, Reconnection and Error handling Test & Debugging Tools Experience with some or most of the following:
· Logic Analyzer
· Oscilloscope
· USB-to-UART adapters
· USB-to-RS-485 adapters
· MODBUS master/slave simulators
· Packet capture tools
· Wireshark
· Serial terminal tools
· MQTT clients
· Network diagnostic tools
· Programmable power supplies
· Signal generators
· Electronic loads
· JTAG/SWD debuggers
· GDB
· Firmware flashing/programming tools
📌 V&V Sr. Engineer – Embedded Firmware (Bengaluru)
🏢 Racanaa Energy
📍 Bengaluru