Synthesis / Static Timing Analysis (STA) Engineer – Advanced Nodes (5nm and Below)

Synthesis / Static Timing Analysis (STA) Engineer – Advanced Nodes (5nm and Below)

21 Nov
|
Best NanoTech
|
Bengaluru

21 Nov

Best NanoTech

Bengaluru

Synthesis / Static Timing Analysis (STA) Engineer Advanced Nodes (5nm and Below)

Employment Type: Permanent / Full-Time
Location: Anywhere in India
Work Mode: Remote / Work From Home (WFH)
Experience: Minimum 5 years of relevant experience
Technology Node: 5nm and below (Mandatory)
Tape-Out Experience: Minimum 4 successful tape-outs below 5nm with direct ownership

1. Role Overview

We are seeking an experienced Synthesis / Static Timing Analysis (STA) Engineer with hands-on expertise in advanced-node semiconductor designs at 5nm and below.

The role involves logic synthesis, timing constraints development, multi-mode multi-corner (MMMC) static timing analysis, timing closure, and signoff for complex SoC and subsystem designs.

Candidates must have direct ownership of at least four successful tape-outs below 5nm and practical experience with UPF-based low-power implementation.

2. Key Responsibilities

- Perform RTL-to-gate-level logic synthesis for advanced-node SoC and subsystem designs at 5nm and below.

- Develop, validate, and maintain Synopsys Design Constraints (SDC) for synthesis and static timing analysis.

- Execute block-level, subsystem-level, and full-chip Static Timing Analysis (STA).

- Perform Multi-Mode Multi-Corner (MMMC) timing analysis across process, voltage, and temperature (PVT) conditions.

- Drive setup and hold timing closure to achieve timing signoff requirements.

- Implement and validate UPF-based low-power design constraints, including power domains, isolation, level shifters, and retention requirements.

- Perform timing path analysis, identify critical paths, and recommend RTL or netlist optimizations.





- Generate and validate Engineering Change Orders (ECOs) for timing, power, and area optimization.

- Execute Logical Equivalence Checking (LEC) using Formality or Conformal LEC.

- Perform low-power consistency checks and validate power-intent implementation throughout the design flow.

- Collaborate with RTL Design, Physical Design, and Design Verification teams to resolve timing and implementation issues.

- Support timing signoff, design reviews, and tape-out readiness for advanced-node semiconductor designs.

3. Required Qualifications
- Bachelor's or Master's degree in Electronics, Electrical Engineering, VLSI, Microelectronics, or a related discipline.

- Minimum 5 years of relevant hands-on experience in logic synthesis, STA, and timing closure.

- Mandatory experience working on 5nm and below technology nodes.

- Minimum 4 successful tape-outs below 5nm with direct technical ownership.

- Hands-on experience implementing and validating UPF-based low-power designs.

- Solid understanding of digital VLSI design, synthesis methodologies, timing constraints, and timing signoff.

- Practical experience with industry-standard EDA tools for synthesis, STA, and formal equivalence checking.





- Experience collaborating with Physical Design and RTL teams on timing closure.

4. Technical Skills

Logic Synthesis

- RTL Synthesis and Logic Optimization

- Synopsys Design Compiler / Fusion Compiler

- Cadence Genus

- Synthesis Constraints Development

- Power, Performance, and Area (PPA) Optimization

Static Timing Analysis

- Synopsys PrimeTime

- Cadence Tempus

- Static Timing Analysis (STA)

- Multi-Mode Multi-Corner (MMMC) Analysis

- Setup and Hold Timing Analysis

- Timing Closure and Signoff

- On-Chip Variation (OCV) Analysis

Low-Power Design

- Unified Power Format (UPF)

- Multi-Voltage and Multi-Power-Domain Designs

- Isolation and Level-Shifter Checks

- State Retention and Power-Gating Checks

- Low-Power Implementation Verification

Timing ECO and Formal Verification

- Timing ECO Generation and Validation

- Engineering Change Orders (ECO)

- Logical Equivalence Checking (LEC)

- Synopsys Formality

- Cadence Conformal LEC

Advanced-Node Implementation

- 5nm and Below Technology Nodes

- Advanced FinFET Design Methodologies

- Block-Level and Full-Chip Timing Signoff

- RTL-to-GDSII Flow Understanding

- Tape-Out Readiness and Signoff

Important Candidate Eligibility Criteria

Applications will be considered only when all four mandatory requirements are met:

- Minimum 5 years of relevant experience.

- Hands-on experience with 5nm and below technology nodes.

- At least 4 successful tape-outs below 5nm with direct ownership.

- Hands-on UPF-based low-power design experience.

Employment: Permanent | Location: Pan India | Work Mode: Remote / WFH

#LI-SD1

📌 Synthesis / Static Timing Analysis (STA) Engineer – Advanced Nodes (5nm and Below)
🏢 Best NanoTech
📍 Bengaluru

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: synthesis / static timing analysis (sta) engineer – advanced nodes (5nm and below) / bengaluru

Subscribe to this job alert:

Get the latest job offers by email for: synthesis / static timing analysis (sta) engineer – advanced nodes (5nm and below) / bengaluru