BMS Hardware Design Engineer (MV / HV Battery Management Systems) (India)

BMS Hardware Design Engineer (MV / HV Battery Management Systems) (India)

21 Nov
|
LT-Larsen & Toubro
|
India

21 Nov

LT-Larsen & Toubro

India

BMS Hardware Design Engineer (MV / HV Battery Management Systems)

Department: R&D;, Power Electronics Experience: 6–10 years

Location: Bangalore Reports to: Head of R&D;

Role Summary

The BMS Hardware Design Engineer owns the hardware design of master and slave battery management boards for medium- and high-voltage battery systems. You will be working on the BMS for C&I;, utility applications. BMS is built with modular master - slave architecture. Need to contribute for BMS design from concept through schematic, layout, bring-up, validation, certification and production support.

System-Level Features

- Scalable and modular architecture, with three slave versions (18S, 54S, 108S).
- Isolation rating of 2.2 kV DC at system level.
- Safety features including HVIL monitoring, IMD and contactor weld detection.
- Aggregates and reports storage system information over CAN 2.0; compatible with the TuringX tool for live tracking, monitoring, configuration and logging.

Key Responsibilities

BMS Hardware Architecture and Design

- Define hardware architecture for master and slave BMS boards across 18S, 54S, 108S up to 1500Vdc.
- Design schematics and component selection for cell monitoring AFEs, isolated ISO-SPI daisy chains, master controller, isolated HV measurement, current sense and contactor drivers.
- Design wide-input auxiliary power supplies with protection, isolation and low quiescent current.
- Derive hardware requirements from product specifications and system requirements, with traceability.

Cell Monitoring and Balancing

- Design high-accuracy cell voltage and temperature measurement chains including filtering, multiplexing and calibration provisions.
- Design passive balancing circuits with thermal analysis and derating.
- Design the isolated ISO-SPI communication interface between slaves and master, including transformer/coupling selection and robustness to noise.

High-Voltage Measurement, Isolation and Safety

- Design isolated high-voltage measurement channels (0–1000V, ±1V; extension to 1500V) with precision dividers and isolated amplifiers/ADCs.
- Implement pack current measurement using Hall sensors, and contactor drive and feedback circuits for positive, negative and precharge contactors.




- Design HVIL, insulation monitoring (IMD) and contactor weld detection circuits.
- Specify creepage/clearance and isolation barriers to meet the 2.2 kV DC system-level isolation rating and the applicable standards.
- Design hardware protections: over/under-voltage, over-current, short circuit, over/under-temperature and regen protection.

PCB Layout, Mechanical and Thermal

- Guide and review PCB layout: stackup, HV spacing, high-density cell-sense routing, EMI/EMC best practice and thermal management.
- Work with mechanical teams on enclosures, connectors, harnessing and compact form factors.
- Perform worst-case analysis, thermal analysis and simulation (LTspice or equivalent) on critical circuits.

Interfaces and Firmware Collaboration

- Define MCU selection, pin mapping and peripheral usage with the BMS firmware team (CAN 2.0, ISO-SPI, SD card logging, ADC, GPIO).
- Support firmware bring-up, calibration of cell and HV measurement, and hardware diagnostics.
- Support integration with PCS/inverters, battery racks and the TuringX monitoring and configuration tool.

Validation, Compliance and Production

- Plan and execute board bring-up, functional, accuracy, isolation (hipot), thermal and environmental testing.
- Support EMI/EMC, safety and applicable standards compliance (e.g., IEC 62619, UL 1973, IEC 61508 / ISO 13849 functional safety where relevant).
- Perform DFMEA/FMEDA, DFM/DFT reviews and support production, test fixtures and field-failure analysis.

Leadership and Collaboration

- Mentor junior hardware engineers; review schematics, layouts and test reports.
- Work with firmware, systems, mechanical, test, procurement and customers on technical queries.
- Own hardware documentation: design specifications, BOMs, test plans and release notes.

Required Qualifications

- B.E./B.Tech in Electronics, Electrical,



Instrumentation or a related field. M.E./M.Tech preferred.
- 6–10 years of hardware design experience, with at least 3 years on BMS or battery-monitoring products (EV, ESS or C&I;).
- Hands-on experience with multi-cell monitoring AFEs (e.g., TI BQ79xxx, ADI LTC68xx/ADBMS, NXP MC33771 or similar) and isolated daisy-chain communication (ISO-SPI / isoSPI).
- Strong knowledge of high-voltage isolated measurement, insulation monitoring, contactor drive and HVIL design.
- Strong command of mixed-signal and analog design: precision references, ADCs, op-amps, filtering, calibration and error budgeting.
- Proficiency in wide-input power supply design (isolated and non-isolated) and protection circuits.
- Working knowledge of CAN / CAN FD hardware, and MCU-based board design (STM32, TI C2000 or similar).
- Proficiency in schematic and layout tools (Altium, OrCAD or similar) and simulation tools (LTspice, PSpice).
- Hands-on debugging with oscilloscopes, isolated probes, precision DMMs, hipot testers and battery cyclers/emulators.
- Understanding of EMI/EMC, safety standards, creepage/clearance and DFMEA.

Preferred Qualifications

- Experience with HV systems, utility-scale ESS or C&I; BMS.
- Experience with functional safety (ISO 26262, IEC 61508) and BMS certifications (UL 1973, IEC 62619, AIS-156).
- Experience with active balancing, SOC/SOH estimation hardware support and cell chemistry characteristics (LFP, NMC).
- Experience with wireless BMS concepts, SD-card/data logging and diagnostic tooling.
- Python scripting for test automation; familiarity with Git, Jira and PLM tools.

Key Competencies

- Strong analytical, debugging and root-cause skills
- Safety-first design mindset for high-voltage systems
- Explicit technical communication and documentation
- Ownership, collaboration and mentoring
- Ability to deliver to schedule in a fast-paced R&D; environment

KPIs

- On-time delivery of hardware design milestones and releases
- First-pass design success and measurement accuracy against specification
- Field failure rate and defect closure time
- Compliance and certification readiness, and design quality metrics

📌 BMS Hardware Design Engineer (MV / HV Battery Management Systems) (India)
🏢 LT-Larsen & Toubro
📍 India

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: bms hardware design engineer (mv / hv battery management systems) (india) / india

Subscribe to this job alert:

Get the latest job offers by email for: bms hardware design engineer (mv / hv battery management systems) (india) / india