21 Nov
|
Larsen and Toubro
|
Bengaluru
21 Nov
Larsen and Toubro
Bengaluru
Department: R&D;, Power Electronics
Experience:
6–10 years
Location:
Bangalore Reports to: Head of R&D; Role Summary The BMS Hardware Design Engineer owns the hardware design of master and slave battery management boards for medium
- and high-voltage battery systems. You will be working on the BMS for C&I;, utility applications. BMS is built with modular master
- slave architecture. Need to contribute for BMS design from concept through schematic, layout, bring-up, validation, certification and production support. System-Level Features
• Scalable and modular architecture, with three slave versions (18S, 54S, 108S).
• Isolation rating of 2.2 kV DC at system level.
• Safety features including HVIL monitoring, IMD and contactor weld detection.
• Aggregates and reports storage system information over CAN 2.0; compatible with the TuringX tool for live tracking, monitoring, configuration and logging.
Key Responsibilities
BMS Hardware Architecture and Design
• Define hardware architecture for master and slave BMS boards across 18S, 54S, 108S up to 1500Vdc.
• Design schematics and component selection for cell monitoring AFEs, isolated ISO-SPI daisy chains, master controller, isolated HV measurement, current sense and contactor drivers.
• Design wide-input auxiliary power supplies with protection, isolation and low quiescent current.
• Derive hardware requirements from product specifications and system requirements, with traceability. Cell Monitoring and Balancing
• Design high-accuracy cell voltage and temperature measurement chains including filtering, multiplexing and calibration provisions.
• Design passive balancing circuits with thermal analysis and derating.
• Design the isolated ISO-SPI communication interface between slaves and master, including transformer/coupling selection and robustness to noise. High-Voltage Measurement, Isolation and Safety
• Design isolated high-voltage measurement channels (0–1000V, ±1V; extension to 1500V) with precision dividers and isolated amplifiers/ADCs.
• Implement pack current measurement using Hall sensors, and contactor drive and feedback circuits for positive, negative and precharge contactors.
• Design HVIL, insulation monitoring (IMD)
and contactor weld detection circuits.
• Specify creepage/clearance and isolation barriers to meet the 2.2 kV DC system-level isolation rating and the applicable standards.
• Design hardware protections: over/under-voltage, over-current, short circuit, over/under-temperature and regen protection. PCB Layout, Mechanical and Thermal
• Guide and review PCB layout: stackup, HV spacing, high-density cell-sense routing, EMI/EMC best practice and thermal management.
• Work with mechanical teams on enclosures, connectors, harnessing and compact form factors.
• Perform worst-case analysis, thermal analysis and simulation (LTspice or equivalent) on critical circuits. Interfaces and Firmware Collaboration
• Define MCU selection, pin mapping and peripheral usage with the BMS firmware team (CAN 2.0, ISO-SPI, SD card logging, ADC, GPIO).
• Support firmware bring-up, calibration of cell and HV measurement, and hardware diagnostics.
• Support integration with PCS/inverters, battery racks and the TuringX monitoring and configuration tool. Validation, Compliance and Production
• Plan and execute board bring-up, functional, accuracy, isolation (hipot), thermal and environmental testing.
• Support EMI/EMC, safety and applicable standards compliance (e.g., IEC 62619, UL 1973, IEC 61508 / ISO 13849 functional safety where relevant).
• Perform DFMEA/FMEDA, DFM/DFT reviews and support production, test fixtures and field-failure analysis. Leadership and Collaboration
• Mentor junior hardware engineers; review schematics, layouts and test reports.
• Work with firmware, systems, mechanical, test, procurement and customers on technical queries.
• Own hardware documentation: design specifications, BOMs, test plans and release notes. Required Qualifications
• B.
E./B.
Tech in Electronics, Electrical, Instrumentation or a related field. M.
E./M.
Tech preferred.
• 6–10 years of hardware design experience, with at least 3 years on BMS or battery-monitoring products (EV, ESS or C&I;).
• Hands-on experience with multi-cell monitoring AFEs (e.g., TI BQ79xxx, ADI LTC68xx/ADBMS, NXP MC33771 or similar) and isolated daisy-chain communication (ISO-SPI / isoSPI).
• Strong knowledge of high-voltage isolated measurement, insulation monitoring, contactor drive and HVIL design.
• Strong command of mixed-signal and analog design: precision references, ADCs, op-amps, filtering, calibration and error budgeting.
• Proficiency in wide-input power supply design (isolated and non-isolated) and protection circuits.
• Working knowledge of CAN / CAN FD hardware, and MCU-based board design (STM32, TI C2000 or similar).
• Proficiency in schematic and layout tools (Altium, OrCAD or similar) and simulation tools (LTspice, PSpice).
• Hands-on debugging with oscilloscopes, isolated probes, precision DMMs, hipot testers and battery cyclers/emulators.
• Understanding of EMI/EMC, safety standards, creepage/clearance and DFMEA. Preferred Qualifications
• Experience with HV systems, utility-scale ESS or C&I; BMS.
• Experience with functional safety (ISO 26262, IEC 61508) and BMS certifications (UL 1973, IEC 62619, AIS-156).
• Experience with active balancing, SOC/SOH estimation hardware support and cell chemistry characteristics (LFP, NMC).
• Experience with wireless BMS concepts, SD-card/data logging and diagnostic tooling.
• Python scripting for test automation; familiarity with Git, Jira and PLM tools. Key Competencies
• Strong analytical, debugging and root-cause skills
• Safety-first design mindset for high-voltage systems
• Transparent technical communication and documentation
• Ownership, collaboration and mentoring
• Ability to deliver to schedule in a fast-paced R&D; environment KPIs
• On-time delivery of hardware design milestones and releases
• First-pass design success and measurement accuracy against specification
• Field failure rate and defect closure time
• Compliance and certification readiness, and design quality metrics
📌 BMS Hardware Design Engineer (Bengaluru)
🏢 Larsen and Toubro
📍 Bengaluru