Peeling Machine Operator (Malappuram)

Peeling Machine Operator (Malappuram)

21 Nov
|
FEROKE BOARDS
|
Malappuram

21 Nov

FEROKE BOARDS

Malappuram

Peeling Machine Operator

1. Position Summary

The Peeling Machine Operator is responsible for operating the veneer peeling (rotary peeling/lathe) machine to convert logs or blocks into veneers of the required thickness and quality for use as core, cross-band or face veneer in door manufacturing. The role demands precision, consistent veneer quality, optimal log utilisation and strict compliance with safety procedures.

2. Key Responsibilities2.1 Machine Operation

- Inspect logs/blocks before loading and position them correctly on the peeling lathe (centring for maximum recovery).
- Set veneer thickness, knife angle, knife gap, pressure bar setting and peeling speed as per specification.
- Operate the peeling machine to produce continuous, uniform veneer sheets/ribbons.
- Monitor the peeling process and adjust settings to avoid loose cuts, tight cuts, chatter marks, tearing and uneven thickness.
- Coordinate with the clipper/veneer handling and dryer sections for smooth material flow.

2.2 Quality Control

- Check veneer thickness regularly using a thickness gauge/micrometer.
- Inspect veneer for defects: cracks, splits, rough surface, holes, knots, torn grain, uneven thickness.
- Ensure veneer meets the required grade for core, cross-band or face use.
- Segregate rejected and substandard veneer and report recurring issues.
- Ensure veneer is peeled to the required specification of thickness and moisture suitability for drying.

2.3 Log/Block Handling & Yield

- Select suitable logs/blocks and report unsuitable raw material (rot, heavy knots, metal inclusions, hollow centre).




- Maximise veneer recovery from every log; minimise round-up loss and core (peeler core) wastage.
- Check logs for nails, stones or metal pieces that can damage the knife.
- Stack and move veneer and peeler cores properly to designated places.

2.4 Knife & Machine Maintenance

- Check knife condition, knife edge and pressure bar before and during each shift.
- Coordinate with the grinding/maintenance team for knife grinding and replacement as scheduled.
- Perform daily lubrication and basic checks: chucks, spindle, drive, hydraulic/pneumatic functions, guards and emergency stop.
- Report abnormal vibration, noise, oil leaks or any malfunction immediately.
- Clean the machine, pit and surrounding area at the end of the shift.

2.5 Documentation

- Record logs processed, veneer thickness, quantity produced, rejection and downtime.
- Provide shift handover details and any machine/raw material issues to the next shift and supervisor.

3. Safety Responsibilities

- Wear prescribed PPE: safety shoes, gloves, ear protection, dust mask and safety glasses.
- Never touch or adjust the knife or pressure bar while the machine is running; follow lockout/tagout during knife change.
- Handle knives with extreme care; use proper knife handling tools and covers.
- Keep transparent of rotating logs,



chucks and moving veneer; never wear loose clothing or jewellery near the machine.
- Secure logs properly in chucks before starting; do not stand in line with the log during start-up.
- Report accidents, near-misses and unsafe conditions immediately.
- Keep walkways clear of veneer, bark and water to prevent slips.

4. Qualifications & Experience

- Minimum: SSLC / 10th pass (ITI Mechanical/Wood Technology preferred).
- 3–5 years of experience operating a rotary veneer peeling machine in a plywood, veneer or door factory.
- Experience with different species and log sizes and with knife setting is strongly preferred.

5. Skills & Competencies

- Strong practical skill in peeling machine setting, knife and pressure bar adjustment.
- Knowledge of veneer thickness, grades and defects.
- Understanding of log selection and recovery optimisation.
- Ability to use thickness gauges, measuring tools and read job instructions.
- Basic mechanical and troubleshooting ability.
- Alertness, patience and consistent attention during continuous operation.
- Physical fitness and ability to work in a high-noise, dusty environment.
- Basic Malayalam required, Hindi/English is a plus.

6. Key Performance Indicators (KPIs)

- Veneer output vs. shift target.
- Veneer thickness consistency and grade quality (rejection %).
- Log recovery/yield percentage.
- Machine downtime and knife life management.
- Safety compliance and housekeeping.
- Accuracy of production and shift records.

Pay: ₹10,000.00 - ₹20,000.00 per month

Work Location: In person

📌 Peeling Machine Operator (Malappuram)
🏢 FEROKE BOARDS
📍 Malappuram

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: peeling machine operator (malappuram) / malappuram

Subscribe to this job alert:

Get the latest job offers by email for: peeling machine operator (malappuram) / malappuram