21 Nov
|
FEROKE BOARDS
|
Malappuram
21 Nov
FEROKE BOARDS
Malappuram
Ripsaw Machine Operator
1. Position Summary
The Ripsaw Machine Operator is responsible for safely and accurately operating the ripsaw machine to cut timber, battens and boards lengthwise into required widths and thicknesses for door core and frame preparation. The role ensures dimensional accuracy, minimum wastage, steady material flow to downstream sections and strict adherence to safety and quality standards.
2. Key Responsibilities2.1 Machine Operation
- Set up, start and operate the ripsaw machine as per the production plan and cutting list.
- Adjust fence, guides, feed rollers and blade height/position to achieve the required width and thickness.
- Feed material correctly, maintaining a steady feed rate to avoid burning, kickback, blade wander or uneven cuts.
- Cut timber/core material to specified sizes as per job card or supervisor instruction.
- Maintain continuous output to match the requirement of the next process (core assembly, pressing, lamination).
2.2 Quality Control
- Check the first piece of every batch with measuring tape, vernier caliper or gauge before running the lot.
- Periodically verify width, thickness, straightness and squareness during the run.
- Identify and segregate defective material (knots, cracks, warp, moisture, rot, bark edges, splits).
- Report repeated defects or raw material quality issues to the supervisor/QC.
- Maintain cutting accuracy within the tolerance defined by the QC team.
2.3 Material Handling & Wastage Control
- Plan cuts to get maximum yield from each piece; minimise offcuts and sawdust loss.
- Stack cut material neatly, sorted by size and grade, at the designated place.
- Segregate usable offcuts for reuse and scrap for disposal as per factory practice.
- Handle material carefully to avoid damage, and use trolleys/lifting aids for heavy loads.
2.4 Maintenance & Housekeeping
- Carry out daily pre-start checks: blade condition, guards, belts, feed rollers, dust extraction, emergency stop, lubrication.
- Report blade dullness, vibration, abnormal noise or any fault immediately to the supervisor/maintenance team.
- Assist in blade changing and sharpening coordination; never attempt major repairs unauthorised.
- Clean the machine and work area (sawdust removal) at the end of every shift.
2.5 Documentation
- Maintain production records: quantity cut, size, batch/job number, rejection and wastage.
- Hand over shift status and pending work clearly to the next shift operator.
3. Safety Responsibilities
- Always wear prescribed PPE: safety shoes, dust mask, ear plugs/muffs, safety glasses and gloves where applicable.
- Never operate the machine with guards removed or safety devices bypassed.
- Never clear jams or adjust settings while the blade is running; switch off and wait for complete stop.
- Keep hands explicit of the blade and feed area; use push sticks where required.
- Follow lockout/tagout practice during maintenance and blade change.
- Report accidents, near-misses and unsafe conditions immediately.
- Follow fire safety rules; keep sawdust and wood waste away from ignition sources.
4. Qualifications & Experience
- Minimum: SSLC / 10th pass (ITI in Carpentry/Wood Technology/Fitter is an advantage).
- 2–4 years of experience operating a ripsaw/rip cutting machine, preferably in a plywood, door, furniture or wood-based factory.
- Freshers with good mechanical aptitude may be considered as Trainee/Helper.
5. Skills & Competencies
- Practical knowledge of ripsaw machine setting, blade types and cutting techniques.
- Ability to read measurements, cutting lists and job cards; basic arithmetic.
- Knowledge of timber types, grain direction, defects and moisture effects.
- Use of measuring tools: tape, steel rule, vernier caliper, squares.
- Basic understanding of machine maintenance and lubrication.
- Attention to detail, discipline and strong safety awareness.
- Physical fitness to stand for long hours and handle material.
- Ability to work in a team; basic Malayalam required, Hindi/English is a plus.
6. Key Performance Indicators (KPIs)
- Output vs. daily/shift target.
- Cutting accuracy and rejection/rework percentage.
- Material yield and wastage percentage.
- Machine uptime and adherence to preventive maintenance routine.
- Safety compliance: zero accidents, PPE usage, housekeeping score.
- Accuracy of production records.
Pay: ₹10,000.00 - ₹20,000.00 per month
Work Location: In person
📌 Ripsaw Machine Operator (Malappuram)
🏢 FEROKE BOARDS
📍 Malappuram