NPI & Test Automation Engineer (Hyderabad)

NPI & Test Automation Engineer (Hyderabad)

22 Nov
|
Exicom
|
Hyderabad

22 Nov

Exicom

Hyderabad

JD – NPI & Test Automation Engineer (Electronics / Power Systems) Role summary The engineer owns NPI support, hardware validation and automated test system development for telecom power products, EV DC chargers and Li-ion battery packs. The role bridges R&D; and production: it turns new designs into tested, production-ready products and builds the test setups that cut test time and improve repeatability on the line.

Key responsibilities
Automated test systems (ATS) and Test Jigs
• Study schematics, rack architecture and engineering documents to define test and validation requirements.
• Prepare wiring diagrams and design universal ATS setups that cover multiple product or rack variants.
• Integrate and commission test hardware: PLCs (e.g. Siemens S7-200 Smart), relay cards, contactors, programmable DC loads (e.g. Chroma), rectifiers/SMRs and power supplies.
• Assemble, wire and verify test setups, then validate them against manual testing before release to production.
• Develop Python applications for functional test cases, real-time monitoring, data logging and Excel/report generation.
• Design and maintain burn-in, life-cycle and regenerative test setups for batteries and SMRs.
• Design simple PCBs for jigs and fixtures (cell simulators, pre-charge test, CAN splitters). New Product Introduction (NPI)
• Take part in Cross-Functional Team (CFT) reviews of design documents, specifications and customer requirements.
• Find design, assembly and testing issues at prototype stage and drive corrective actions with R&D.;
• Review prototype builds,



test reports and engineering documents before production release.
• Prepare assembly and test documents (SOPs, work instructions) for manual and automated testing. Production support and validation
• Support testing and troubleshooting of telecom power systems, EV DC fast chargers and Li-ion battery packs / BMS.
• Lead root-cause analysis of assembly and functional failures with Production, Quality and R&D.;
• Suggest and implement improvements that raise test coverage, throughput and first-pass yield. Required skills Area What we need Programming Python, including hands-on test or monitoring tools; PyQt/PySide (GUI), Pandas and Matplotlib preferred Communication protocols CAN plus at least two of RS485, RS232, UART, SPI, I2C, Modbus Automation hardware PLC programming (Siemens preferred), relay/contactor logic, Arduino or similar controllers Test equipment Programmable DC loads, power supplies, rectifiers/SMRs, DMMs, oscilloscopes, data loggers Electronics & power Power electronics basics, SMPS/rectifiers, battery packs and BMS, PCB-level troubleshooting Documentation Wiring diagrams, test procedures, test reports, SOPs and work instructions Tools Git/GitLab, Excel; a PCB tool such as EasyEDA or Altium is a plus Preferred experience




• Has built and deployed at least one automated test station (ATS) or test jig that is running in production.
• NPI

experience:
prototype reviews, production validation and handover from R&D; to manufacturing.
• Domain exposure to telecom power systems (48V DC power plants, SMRs), EV DC rapid chargers or Li-ion battery packs and BMS.
• Experience with regenerative or energy-saving test setups, burn-in and life-cycle testing.
• Track record of cutting test or analysis time through automation (with numbers). Behavioural competencies
• Works well in cross-functional teams with R&D;, Quality and Production.
• Takes ownership from requirement study through to production deployment.
• Methodical problem solver; uses root-cause analysis, not trial and error.
• Clear written and verbal communication, including documentation for operators.
• Adapts quickly to new products and shifting priorities on the shop floor. Must-have Good-to-have B.
E./B.
Tech in Electronics, Electrical or Instrumentation Instrumentation & Control background 2–3 years in hardware testing, test automation or NPI Telecom power, EV charger or Li-ion battery/BMS industry Python used for real test or data-logging tools PyQt/PySide GUI and Pandas/Matplotlib reporting Hands-on CAN plus one serial protocol (RS485/RS232/UART) SPI, I2C, Modbus PLC or relay/contactor-based automation they built themselves Siemens S7 PLC experience Has used programmable loads and power supplies Regenerative / burn-in test setups; basic PCB design

📌 NPI & Test Automation Engineer (Hyderabad)
🏢 Exicom
📍 Hyderabad

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: npi & test automation engineer (hyderabad) / hyderabad

Subscribe to this job alert:

Get the latest job offers by email for: npi & test automation engineer (hyderabad) / hyderabad