Embedded Firmware (Gurugram)

Embedded Firmware (Gurugram)

22 Nov
|
The Filia
|
Gurugram

22 Nov

The Filia

Gurugram

About The Filia The Filia builds autonomous drone docks for India's critical infrastructure, defence and industrial sites. A drone lives on site: it lands on the dock, charges and relaunches on its next mission with nobody on site. The dock is designed and built in Delhi NCR to the Drone Federation of India's national protocol, and our first field-ready units are scheduled for Q1 2027. We work with leading Indian drone makers to integrate their aircraft. The role This is the founding embedded role. You will own the electronic and software link between three things: the dock, the drone and the drone's battery. When a drone lands, your firmware decides whether it is safe to charge, talks to the battery and the autopilot, controls the charge and tells the drone when it can fly again. You will work directly with the founder, our mechanical and thermal lead and the hardware team, and you will be on the bench from week one. What you will own
• Firmware for the dock's sensing and control boards (STM32-class MCUs): cell voltage and temperature measurement, pack identification, contact safety and charger control
• Communication between dock, battery and drone: CAN / DroneCAN, UART, SMBus and I2C, and MAVLink to ArduPilot and PX4 autopilots
• The landing-to-launch sequence: confirming the drone is down and disarmed, enabling the charge and handing the mission back to the autopilot
• Safety logic that holds when things go wrong: watchdogs, fail-safe states and hardware interlocks that do not depend on firmware alone
• Board bring-up with the hardware team: schematic review,



first power-on and debugging with scope and logic analyser
• Test rigs and fault injection on the bench (open sense lines, bad packs, lost comms, water on contacts) before anything touches a real drone
• Flight and charge logs from every sortie, in a format the dock can sign and upload What we are looking for
• 3+ years writing embedded firmware that shipped in a real product (C/C++, bare metal or an RTOS such as FreeRTOS or Zephyr)
• Hands-on CAN

experience:
you have written or debugged CAN messaging between two devices, not only read about it
• Comfortable with UART, SPI and I2C drivers, interrupts, DMA and low-level debugging
• Able to read a schematic and bring up a recent board
• Based in, or willing to move to, Delhi NCR and work on-site in Gurugram Strong plus
• ArduPilot or PX4: MAVLink messaging, parameters, SITL/HITL, or contributions to either codebase
• Drone avionics, flight controllers, ESCs or power distribution boards
• EV battery, BMS or charger communication (CAN-based charging, cell-monitoring ICs from TI or ADI)
• Python tooling for test rigs and log analysis Working here
• Small team, real hardware, short loops from idea to bench to field
• You will define how the dock and the drone talk to each other, and that work becomes part of how Indian drones run unattended
• Based in Gurugram, with field testing at partner sites

How to apply
Apply here and answer the screening questions. Shortlisted candidates have a 30-minute call, then a short practical exercise built around a real problem we have worked through, then a walkthrough with the team.

📌 Embedded Firmware (Gurugram)
🏢 The Filia
📍 Gurugram

Reply to this offer

Impress this employer describing Your skills and abilities, fill out the form below and leave Your personal touch in the presentation letter.

Subscribe to this job alert:

Get the latest job offers by email for: embedded firmware (gurugram) / gurugram

Subscribe to this job alert:

Get the latest job offers by email for: embedded firmware (gurugram) / gurugram