About us

Medavera Technologies builds medical simulation and anatomy training products — including instrumented mannequins, task trainers and haptic devices used to train clinicians. Our R&D; centre is in Zirakpur, Punjab.

About the role

Our simulators are physical as well as virtual. You'll own the electronics inside them — schematic through PCB through firmware through bring-up — and the interface that carries sensor data into the simulation software. This is a hands-on bench role as much as a CAD role.

What you'll do
Design schematics and multi-layer PCB layouts for sensing, actuation and control boards.
Write embedded firmware in C/C++ on STM32 (ARM Cortex-M) and ESP32 platforms.
Integrate and calibrate sensors — force, pressure, load cells, IMUs, hall-effect, encoders — including analogue signal conditioning.
Drive actuators for haptic and mechanical feedback: servos, steppers, solenoids, motor drivers and power stages.
Build the hardware-to-software communication layer over USB HID, serial, BLE or Wi-Fi.
Bring up prototypes and debug at board level with oscilloscope and logic analyser.
Maintain BOMs, schematics, test procedures and documentation; coordinate with fabrication and assembly vendors.
Work alongside mechanical,



software and 3D teams on integrated builds.

Requirements
2–5 years in embedded systems or electronics product development.
PCB design in Altium, KiCad or Eagle — schematic capture and layout.
Solid embedded C/C++ — bare-metal, HAL and RTOS.
Hands-on with UART, SPI, I2C, CAN, USB and at least one wireless stack.
Sensor interfacing and analogue signal conditioning — amplification, filtering, ADC selection, noise management.
Practical bench debugging with oscilloscope, logic analyser and multimeter.
B.E./B.Tech in Electronics, Electronics & Communication, Instrumentation or related.

Preferred
Haptic or force-feedback system design.
Medical device or lab instrumentation experience; awareness of IEC 60601.
Closed-loop motor control and PID tuning.
Python for test automation and calibration rigs.
Basic Unity or Unreal familiarity for hardware integration.
CAD literacy (SolidWorks / Fusion 360).

Apply through Indeed with your CV. Please include details of at least one project you took from schematic to working hardware — board photos, schematics or a repo link are all welcome.

Pay: ₹10,000.00 - ₹40,000.00 per month

Work Location: In person

📌 Electronics Engineer — Embedded C,pcb Design Zirakpur (India)
🏢 Nevrio Technology Services
📍 India