Role Responsibilities
# Design and develop analog and mixed-signal IC blocks such as bandgap references, LDOs, bias circuits, oscillators, amplifiers, comparators, ADC/DAC support circuits, current/voltage sensing circuits, level shifters, and high-voltage interface circuits
# Own the full design cycle from specification definition, architecture selection, transistor-level design, simulation, layout guidance, post-layout verification, silicon bring-up, characterization, and production support.
# Perform detailed simulations across PVT, mismatch, Monte Carlo, noise, stability, transient, startup, PSRR, CMRR, and reliability conditions.
# Work closely with layout engineers to guide floorplanning, matching, shielding, routing, parasitic-aware layout, ESD/latch-up considerations, and post-layout debug.
# Collaborate with digital, verification, applications, test, product, and systems teams to ensure the design meets product-level requirements.
# Analyze silicon measurement results, correlate silicon behavior with simulation, identify root causes, and drive design fixes when needed.
# Support design documentation, design reviews, FMEA, production test definition, and customer/debug activities as required.

Required Qualifications

# BSEE/MSEE/PhD in Electrical Engineering or related field.
#5+ years of hands-on analog or mixed-signal IC design experience.
# Strong fundamentals in CMOS analog design, device physics, feedback systems, noise, mismatch, stability, sampling circuits, and layout-dependent effects.
# Experience designing one or more of the following: precision references, regulators, amplifiers, ADC/DAC circuits, sensor interfaces,



oscillators, high-voltage analog circuits, or power management blocks.
# Strong experience with Cadence Virtuoso, Spectre, ADE, Monte Carlo analysis, corner simulations, and post-layout extraction flows.
# Ability to debug complex analog issues using simulation and silicon data.
# Good understanding of layout techniques for precision analog design, including matching, common-centroid layout, guard rings, isolation, shielding, and parasitic control.
# Ability to work independently, take ownership of blocks, and drive them to tapeout-quality completion.

Preferred Qualifications

Experience with BCD, high-voltage CMOS, automotive, industrial, battery management, optical control, or precision sensing products.
Experience with sigma-delta ADCs, SAR ADCs, current sensing, temperature sensors, bandgaps, LDOs, charge pumps, or isolated/high-voltage interfaces.
Familiarity with reliability checks, ESD/latch-up constraints, EM/IR, antenna, DRC/LVS, and foundry design rules.
Experience with silicon bring-up, bench characterization, ATE correlation, and production yield improvement.
Knowledge of Verilog-A modeling, MATLAB/Python data analysis, or mixed-signal verification is a plus.

Desired Attributes

Strong analytical and debugging mindset.
Practical, silicon-oriented design judgment.
Ability to balance performance, area, power, schedule, and risk.
Good communication skills and ability to work across global engineering teams.
Comfortable working in a fast-paced startup setting with high ownership and limited hand-holding.

Send your CV to [email protected]

📌 Senior Analog/Mixed Signal IC Design Engineer (Bengaluru)
🏢 PI Semiconductor
📍 Bengaluru