To perform accurate and reliable analysis of Raw Material as per method of analysis or protocol.
To perform method transfer, method verification, analytical method validation and protocol base study.
To record the procedure of the test performed and observations contemporaneously.
To review the results against specification / acceptance criteria mentioned in the protocol. If any abnormality to be informed immediately to Section head.
To review the Method of analysis / worksheet prior to analysis and shall inform to the section In charge for the potential failure (if any).
Preparation of Standard Test Procedure, Method of Analysis, Specification and Standard Operating Procedure as and when required
To operate the QC equipment(s).
Sample Receive:
To receive the sample along with Test request slip (TRF) or Goods Receipt Notes (GRN). To verify the physical sample condition and sample label against TRF / GRN.
To allocate the AR. No. in ‘Inward register’.
General :
To verify the sample details (Material Name, Sample Name, Batch No.,etc.) before perform the analysis.
To ensure the current version method of analysis and specification available before analysis.
To verify the instrument calibration status before perform the analysis.
At start of the shift inform to operator/ supervisor for requirement of chemical usage in analysis.
After completion of analysis enter the results in LIMS software.
Record the analytical document on line (contemporaneously) and submit to reviewer / section head after completion
To follow valuable laboratory practices.
Reporting of all above analytical work to section head / In-charge-QC.
Sample preparation & Related documentation for the sample to be sent to the outside laboratory
To participate in investigations of OOS / laboratory incident / OOT / deviation.
To inform the section In charge for the break-down of equipment.
Immediately information to the In-charge-QC in case of any abnormal observation found during analysis.
Any data integrity related observation in the department shall be bring to notice of QC-Head