Responsibilities

- Rope Access Work - Perform rope-access activities under the supervision of IRATA Level III Supervisor.
- Welding Work - Carry out SMAW/approved welding works for pile repair, patch plates, wrap plates, stiffeners and other structural repair items as per approved WPS/drawing.
- Pile Repair - Execute repair works on steel jetty piles from rope access, including preparation, fit-up and welding of repair plates.
- Surface Preparation - Carry out required grinding, cleaning and preparation of steel surfaces before welding, as instructed.
- Fit-Up - Properly position, align and temporarily secure repair plates before welding.
- Welding Quality - Ensure welding is carried out as per approved WPS, welding parameters and project specifications.
- Rope & Welding Safety - Protect ropes, harnesses and other rope-access equipment from welding sparks, molten metal, sharp edges and heat.
- Tools & Equipment - Inspect and safely use welding machines, electrode holders, grinders, cables, tools and rope-access equipment.
- Dropped Object Prevention - Properly secure welding tools, grinders, electrodes and other equipment while working at height.
- Hot Work Safety - Follow hot-work permit requirements, fire-prevention measures and maintain suitable fire protection/fire watch as required.
- Coordination with NDT - Coordinate with NDT personnel for inspection/testing of completed welds and rectify defects identified during inspection.




- Quality Control - Report welding defects such as cracks, porosity, undercut, lack of fusion or other unacceptable weld conditions to the supervisor.
- Daily Inspection - Check ropes, harness, connectors, descender/ascender and other PPE before commencing work and report any defect immediately.
- Emergency/Rescue - Participate in the project rescue plan and assist the Level III during emergency rescue operations, as trained and directed.
- Environmental Conditions - Stop and inform Level III in case of unsafe wind, tide, wave, rain, poor visibility or other marine conditions.
- Housekeeping - Remove welding waste, electrodes, slag and other debris safely without creating a dropped-object or marine pollution hazard.
- Documentation - Maintain required welding records, consumable details, job completion records and other documentation as instructed.
- Safety Compliance - Strictly follow PTW, JSA/RA, toolbox talks, HSE procedures and instructions of the IRATA Level III Supervisor.
- Stop Work - Immediately stop work and inform the Level III if any unsafe condition or deviation from the approved method is observed.

Disclaimer: This job posting has been aggregated from external source. Role details, content, and availability are subject to change. Applicants are advised to confirm the latest information directly on the company website before applying.

📌 IRATA Level II Technician - Welder (Ghaziabad)
🏢 Gulachi Engineers
📍 Ghaziabad